The Influence of Technological Parameters on the Structure and Properties of the Selective Laser Melting Al–Cu–Mg–Si Alloy
| Dublin Core | Metadados PKP | Metadados do documento | |
| 1. | Título | Título do documento | The Influence of Technological Parameters on the Structure and Properties of the Selective Laser Melting Al–Cu–Mg–Si Alloy |
| 2. | Autor principal | Autor, estabelecimento, país | A. Petrova; Mikheev Institute of Metal Physics, Ural Branch, Russian Academy of Sciences |
| 2. | Autor principal | Autor, estabelecimento, país |
A. Klenov; Federal State Unitary Enterprise “Russian Federal Nuclear Center – Zababakhin All–Russia Research Institute of technical Physics” |
| 2. | Autor principal | Autor, estabelecimento, país | I. Brodova; Mikheev Institute of Metal Physics, Ural Branch, Russian Academy of Sciences |
| 2. | Autor principal | Autor, estabelecimento, país | D. Rasposienko; Mikheev Institute of Metal Physics, Ural Branch, Russian Academy of Sciences |
| 2. | Autor principal | Autor, estabelecimento, país | A. Pilshikov; Snezhinsky Physics and Technical Institute of the National Research Nuclear University “MEPhI” |
| 2. | Autor principal | Autor, estabelecimento, país | N. Orlova; Snezhinsky Physics and Technical Institute of the National Research Nuclear University “MEPhI” |
| 3. | Assunto | Disciplinas | |
| 3. | Assunto | Palavras-chave | selective laser melting; 3<i>D</i> printer; aluminum alloy; structure; properties; bulk structured samples; deffects |
| 4. | Descrição | Resumo | Abstract—Monolithic and bulk-structured samples of different densities were produced by means of selective laser melting on the 3D-metal printer Realizer SLM 100. An evaluation of their quality and structure characterization were carried out. Correlation of parameters of synthesis—intertrack distance and layer thickness at 200 W laser power, and structural characteristics were determined. According to the experimental results, optimal parameters of the synthesis were found for obtaining samples from AK6 alloy with dispersed structure and high mechanical properties. Correlation of the fine structure paramerers of the volume-structured samples with cubic geometry and synthesis parameters were established, types of defects that affect their mechanical properties were determined. |
| 5. | Editor | Organizador, cidade | The Russian Academy of Sciences |
| 6. | Contributor | Patrocinadores | |
| 7. | Data | (DD-MM-AAAA) | 01.10.2023 |
| 8. | Tipo | Tipo ou gênero da pesquisa | Artigo avaliado por pares |
| 8. | Tipo | Tipo | |
| 9. | Formato | Formato do arquivo | |
| 10. | Identificador | Identificador universal, URI | https://journals.eco-vector.com/0015-3230/article/view/663013 |
| 10. | Identificador | Digital Object Identifier (DOI) | 10.31857/S0015323023600922 |
| 10. | Identificador | eLIBRARY Document Number (EDN) | REYDMA |
| 11. | Fonte | Revista/Conferêcia, tomo, número (ano) | Fizika metallov i metallovedenie; Volume 124, Nº 10 (2023) |
| 12. | Língua | Russian=ru, English=en | |
| 13. | Relação | Arquivos suplementares |
(759KB) (961KB) (736KB) (962KB) (2MB) (1MB) (2MB) (199KB) (81KB) |
| 14. | Cobertura | Abrangência espacial e temporal, metodologia de pesquisa | |
| 15. | Direitos Autorais | Direitos Autorais e Licenças |
Declaração de direitos autorais © А.Н. Петрова, А.И. Клёнов, И.Г. Бродова, Д.Ю. Распосиенко, А.А. Пильщиков, Н.Ю. Орлова, 2023 |