<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE root>
<article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ali="http://www.niso.org/schemas/ali/1.0/" article-type="research-article" dtd-version="1.2" xml:lang="en"><front><journal-meta><journal-id journal-id-type="publisher-id">Tractors and Agricultural Machinery</journal-id><journal-title-group><journal-title xml:lang="en">Tractors and Agricultural Machinery</journal-title><trans-title-group xml:lang="ru"><trans-title>Тракторы и сельхозмашины</trans-title></trans-title-group></journal-title-group><issn publication-format="print">0321-4443</issn><issn publication-format="electronic">2782-425X</issn><publisher><publisher-name xml:lang="en">Eco-Vector</publisher-name></publisher></journal-meta><article-meta><article-id pub-id-type="publisher-id">66224</article-id><article-id pub-id-type="doi">10.17816/0321-4443-66224</article-id><article-categories><subj-group subj-group-type="toc-heading" xml:lang="en"><subject>Articles</subject></subj-group><subj-group subj-group-type="toc-heading" xml:lang="ru"><subject>Статьи</subject></subj-group><subj-group subj-group-type="article-type"><subject>Research Article</subject></subj-group></article-categories><title-group><article-title xml:lang="en">General technical and technological requirements to the system of innovative machine technologies and machinery</article-title><trans-title-group xml:lang="ru"><trans-title>Общие технические и технологические требования к системе инновационных машинных технологий и техники</trans-title></trans-title-group></title-group><contrib-group><contrib contrib-type="author"><name-alternatives><name xml:lang="en"><surname>Beylis</surname><given-names>V. M</given-names></name><name xml:lang="ru"><surname>Бейлис</surname><given-names>В. М</given-names></name></name-alternatives><bio xml:lang="en"><p>PhD in Engineering</p></bio><bio xml:lang="ru"><p>канд. с.-х. наук</p></bio><email>vim@vim.ru</email><xref ref-type="aff" rid="aff1"/></contrib></contrib-group><aff-alternatives id="aff1"><aff><institution xml:lang="en">All-Russian Research Institute of Agricultural Mechanization</institution></aff><aff><institution xml:lang="ru">Всероссийский научно-исследовательский институт механизации сельского хозяйства</institution></aff></aff-alternatives><pub-date date-type="pub" iso-8601-date="2016-05-15" publication-format="electronic"><day>15</day><month>05</month><year>2016</year></pub-date><volume>83</volume><issue>5</issue><issue-title xml:lang="en">NO5 (2016)</issue-title><issue-title xml:lang="ru">№5 (2016)</issue-title><fpage>49</fpage><lpage>52</lpage><history><date date-type="received" iso-8601-date="2021-04-27"><day>27</day><month>04</month><year>2021</year></date></history><permissions><copyright-statement xml:lang="en">Copyright ©; 2016, Beylis V.M.</copyright-statement><copyright-statement xml:lang="ru">Copyright ©; 2016, Бейлис В.М.</copyright-statement><copyright-year>2016</copyright-year><copyright-holder xml:lang="en">Beylis V.M.</copyright-holder><copyright-holder xml:lang="ru">Бейлис В.М.</copyright-holder><ali:free_to_read xmlns:ali="http://www.niso.org/schemas/ali/1.0/"/><license><ali:license_ref xmlns:ali="http://www.niso.org/schemas/ali/1.0/">https://creativecommons.org/licenses/by-nc-nd/4.0</ali:license_ref></license></permissions><self-uri xlink:href="https://journals.eco-vector.com/0321-4443/article/view/66224">https://journals.eco-vector.com/0321-4443/article/view/66224</self-uri><abstract xml:lang="en"><p>The technical and technological requirements to the system of machines are given now only for certain groups of technical means, which does not reflect the values and development of the entire system. The paper deals with the basic general requirements to the system, including aspects of technological and technical basis for sustainable food and raw materials supply for Russia's economic security and formation of technical policy. The system of basic technologies is defined; it should consist of a set of machine process modules that are necessary for the implementation of the entire set of operations of agricultural production. It is found that a promising range of machinery must contain technologically, technically and economically optimal set of standard series, including their constituent equipment with indication of modifications and models in production, united by common economic purpose and complete production technology. It is noted that the developed ranges of the technical means should comply with the progressive innovation trends of scientific and technical and technological progress. It is proposed to put into operation the systematized basic requirements for all main types of agricultural machinery. They should reflect the typical basic indicators for each type of machine. It is found that certain standard sizes of technical means require to cite only those indicators by which they differ from the basic model. The paper summarizes the requirements to the technical and economic efficiency of the system of technology and machinery with highlighting the innovations in the system.</p></abstract><trans-abstract xml:lang="ru"><p>Технологические и технические требования к системе машин в настоящее время представлены только по отдельным группам технических средств, что не отражает значения и развития всей системы. В статье изложены основные общие требования к системе, включая технологическую и техническую базу для устойчивого продовольственного и сырьевого обеспечения экономической безопасности России и формирования технической политики. Определена система базовых технологий, которая должна состоять из совокупности машинных технологических модулей, необходимых для осуществления всего множества операций производства сельскохозяйственной продукции. Установлено, что перспективный типаж техники должен содержать технологически, технически и экономически оптимальный по номенклатуре и параметрам свод типоразмерных рядов, включая входящую в них технику с указанием модификаций и производимых моделей, объединенных общностью хозяйственного назначения и законченными технологиями производства продукции. Отмечается, что разрабатываемые типажи технических средств должны соответствовать прогрессивным инновационным направлениям и тенденциям научно-технического и технологического прогресса. Предложено включать в работу систематизированные типовые исходные требования по всем основным видам сельскохозяйственной техники. Эти требования должны отражать типичные основополагающие показатели по каждому виду машин. Установлено, что для отдельных типоразмеров технических средств необходимо приводить лишь те показатели, которыми они отличаются от базовой модели. Обобщены требования к технико-экономической эффективности системы технологий и техники с выделением инноваций в системе.</p></trans-abstract><kwd-group xml:lang="en"><kwd>innovations</kwd><kwd>machinery</kwd><kwd>technology</kwd><kwd>technological progress</kwd><kwd>system of machines</kwd></kwd-group><kwd-group xml:lang="ru"><kwd>инновации</kwd><kwd>техника</kwd><kwd>технология</kwd><kwd>технический прогресс</kwd><kwd>система машин</kwd></kwd-group></article-meta></front><body></body><back><ref-list><ref id="B1"><label>1.</label><mixed-citation>Измайлов А.Ю., Елизаров В.П., Антышев Н.М. и др. Система технологий, типажей и параметры машин для комплексной механизации растениеводства: разработка и развитие в рыночных условиях. М.: ВИМ, 2010. 303 c.</mixed-citation></ref><ref id="B2"><label>2.</label><mixed-citation>Елизаров В.П., Бейлис В.М. Основные требования к федеральной системе машин для растениеводства // В сб. науч. тр. МГАУ. М.: МГАУ, 2005. Т. I. С. 5-7.</mixed-citation></ref><ref id="B3"><label>3.</label><mixed-citation>Антышев Н.М., Бейлис В.М., Елизаров В.П. и др. Исходные требования к Зональной системе технологий и машин для производства продуктов растениеводства в дальневосточном регионе России. Благовещенск: Дальгау, 2007. 166 с.</mixed-citation></ref><ref id="B4"><label>4.</label><mixed-citation>Бейлис В.М. Технологические системы и продолжительность полевых работ // Сельскохозяйственные машины и технологии. 2012, №5. С. 14-17.</mixed-citation></ref><ref id="B5"><label>5.</label><mixed-citation>Елизаров В.П., Бейлис В.М. Аспекты методологии разработки системы типажей технических средств для КФХ // Сельскохозяйственные машины и технологии. 2013, №5. С. 23-25.</mixed-citation></ref><ref id="B6"><label>6.</label><mixed-citation>Бейлис В.М. Влияние продолжительности полевых работ на формирование системы технологий и машин // Земледельческая механика в растениеводстве: Сб. докл. Междунар. науч.-практ. конф. Т. 2. М.: ВИМ, 2001. С. 26-31.</mixed-citation></ref><ref id="B7"><label>7.</label><mixed-citation>Бейлис В.М., Кашпура Б.И., Беркаль И.В. и др. Зональная система технологий и машин для растениеводства Дальнего Востока на 2006-2015 гг. Благовещенск: Дальгау, 2005. 486 с.</mixed-citation></ref><ref id="B8"><label>8.</label><mixed-citation>Елизаров В.П., Бейлис В.М. Разработка технологий для производства сельскохозяйственных культур // Научно-технический прогресс в инженерной сфере АПК России - разработка высокоэффективных ресурсосберегающих технологий: Сб. докл. XXV Междунар. науч.-практ. конф. Т. 1. М.: ВИМ, 2008. C. 27-34.</mixed-citation></ref></ref-list></back></article>
