The main preparation of the soil for protective forest plantations on agricultural fields and tractor pass of gully slopes with the steepness up to 12° in the regions of insufficient and unstable moistening is characterized by a low degree of crumbling of the soil layer, when using plows , high energy and material intensity, multi-operation (plowing, deep loosening, destruction of soil blocks). Plowing across slopes with a steepness of more than 4-6° is made only under a slope, i.e. each working stroke is idle, and this reduces the productivity. The design of a combined tillage machine is offered, it is the hinged ripper plow PRN-40, replacing plows of general purpose PLN-4-35 and the plant PPN-40, the hinged ripper RN-80, the cultivator KRT-3 or the heavy disc harrow BDNT-3, which produces a deep layered cultivation of the soil (plowing to a depth of 25...27 cm and loosening the subsoil layer by 25...40 cm) and active circulation of the soil layer both downward and upward along the slope to 12...15 °; excluding additional treatment for the purpose of destroying soil blocks. In the plow-ripper PRN-40, the working parts of the passive (the body with the shortened blade and the deep cutter) and the active (rotary ripper) operation are used. They use power of the tractor engine through its propulsors and PTO separating the plowing process into separate operations performed at different rates of impact and subject to a layer of various non-energy-intensive types of deformation.