Tractors and Agricultural MachineryTractors and Agricultural Machinery0321-44432782-425XEco-Vector6639810.17816/0321-4443-66398Research ArticleImproving the design of the working body for layer-by-layer tillageBozhkoI. VPhD in Engineeringi.v.bozhko@mail.ruParhomenkoG. GPhD in Engineeringi.v.bozhko@mail.ruKambulovS. IDSc in Engineeringi.v.bozhko@mail.ruFederal State Budgetary Institution «Agrarian Scientific Center «Donskoy»15102018855263127042021Copyright © 2018, Bozhko I.V., Parhomenko G.G., Kambulov S.I.2018Tillage is considered to be the methods of mechanical impact on the soil, contributing to the improvement of its fertility and the creation of better conditions for the growth and development of plants. Layerless processing without cover takes one of the most significant operations carried out during the preparation of the soil. This is confirmed by the fact that layer-by-layer processing promotes the accumulation of moisture inside the soil layer, the separation of the seam into layers, and the reduction of soil erosion. The aim of the research is to improve the design features of the main elements of the working body for layer-by-layer soilless tillage. Based on the methods of analysis and synthesis of research, as well as modeling, an improved design of the working body was proposed. It provides for the possibility of replacing almost all the main elements as they wear out, which in turn indicates a high level of wear resistance of the developed structure and a significant reduction in labor costs during its maintenance. In addition to the use of metal basic elements of various shapes (flat-cutter, curvilinear ripper) in the design of the working body, the use of ultra-high-molecular polyethylene inserts partially or completely replacing the main structural elements of the working body is also provided. Experimental studies have found that the traction resistance of the working body using a flat-ripper in the construction is 9,30 kN, with a curvilinear ripper 8,04 kN, which is 13,56 % lower than the flat-cutter. With the use of ultra-high molecular polyethylene inserts, a decrease in traction resistance of up to 7,6 kN was observed, which is 18,28 % lower compared to a flat-ripper. The proposed design allows layer-by-layer soilless tillage, carrying out at the same time a deep 25-35 cm and shallow 12-16 cm tillage, and also allows to obtain an aligned field background after the passage of the unit.working body designmaintainabilitybasic elementstillagelayer-by-layer cultivationконструкция рабочего органаремонтопригодностьосновные элементыпочвообработкапослойное рыхление[Telichenko V. The rate of the pile settlement in clay soil with regard to its viscoelastic and elastic-plastic properties / V. Telichenko, A. Ter-Martirosyan, V. Sidorov // Procedia Engineering. 2016. 165. P. 1359-1366.][Пархоменко Г.Г., Божко И.В., Семенихина Ю.А., Пантюхов И.В., Дроздов С.В., Громаков А.В., Камбулов С.И., Белоусов С.В. Совершенствование рабочих органов для обработки почвы / Состояние и перспективы развития сельскохозяйственного машиностроения: материалы 9-й международной научно-практической конференции 2-4 марта 2016 г., г. Ростов-на-Дону. В рамках 19-й международной агропромышленной выставки «Интерагромаш-2016» (г. Ростов-на-Дону, ВЦ «Вертолэкспо» 2-4 марта 2016 г.). Ростов-на-Дону: Донской ГТУ, 2016. С. 27-30.][Qin А. Semi-analytical solution to one-dimensional consolidation for viscoelastic unsaturated soils / A. Qin, D. Sun, J. Zhang // Computers and Geotechnics. 2014. 62. P. 110-117.][Божко И.В. Разработка комбинированного рабочего органа для послойной безотвальной обработки почвы / И.В. Божко, Г.Г. Пархоменко, А.В. Громаков, С.И. Камбулов, В.Б. Рыков // Тракторы и сельхозмашины. 2016. № 8. С. 3-6.][Пархоменко Г.Г., Божко И.В., Громаков А.В., Камбулов С.И., Рыков В.Б. Рабочий орган для послойной безотвальной обработки почвы: патент на полезную модель № 139415, Российская Федерация; опубл. 20.04.2014. Бюл. № 11.][Пахомов В.И., Рыков В.Б, Камбулов С.И., Шевченко Н.В., Ревякин Е.Л. Опыт возделывания озимой пшеницы в условиях недостаточного увлажнения. М.: ФГБНУ «Росинформагротех», 2015. - 160 с.][Божко И.В. Обоснование параметров эллиптического рыхлителя рабочего органа для послойной безотвальной обработки почвы: автореф. дис. …канд. техн. наук: 05.20.01 / Божко Игорь Владимирович. Краснодар, 2015. 23 с.][Божко И.В., Пархоменко Г.Г., Пахомов В.И., Пантюхов И.В., Камбулов С.И., Рыков В.Б., Ридный С.Д., Громаков А.В. Комбинированный рабочий орган для послойной безотвальной обработки почвы: патент на полезную модель № 156896, Российская Федерация; опубл. 20.11.2015. Бюл. № 32.]