Problems of the Russian primers market

Cover Page

Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription or Fee Access

Abstract

The results of the primers presented on the Russian Federation market comprehensive study are presented. According to the study result, the primers effectiveness is assessed according to their main functional purpose: the ability to even out the absorbency of dissimilar substrates, strengthen weak surfaces and provide the necessary finishing layer adhesion strength to the substrate. According to the experimental results, it has been established that some primers do not provide the properties declared by manufacturers, in particular, not leveling the dissimilar materials absorbency (aerated concrete block and gypsum plaster), and also lead to a decrease in adhesion. The key study conclusion is that there is no direct correlation between the primer cost and its effectiveness. It is shown that there are products with a significant difference in quality in one price segment. It is justified that it is necessary choosing primers according to comprehensive laboratory tests, rather than marketing promises or price.

Full Text

Restricted Access

About the authors

A. P. Pustovgar

National Research Moscow State University of Civil Engineering

Author for correspondence.
Email: PustovgarAP@mgsu.ru

Candidate of Sciences (Engineering), Docent, Scientific Supervisor, Scientific Research Institute of Construction Materials and Technologies

Russian Federation, bld 2, 26, Yaroslavskoe Highway, Moscow, 129337

A. Y. Abramova

National Research Moscow State University of Civil Engineering

Email: AbramovaAYU@mgsu.ru

Candidate of Sciences (Engineering), Head of the Laboratory, Scientific Research Institute of Construction Materials and Technologies

Russian Federation, bld 2, 26, Yaroslavskoe Highway, Moscow, 129337

K. A. Nikulina

National Research Moscow State University of Civil Engineering

Email: NikulinaKA@mgsu.ru

Engineer, Scientific Research Institute of Construction Materials and Technologies

Russian Federation, bld 2, 26, Yaroslavskoe Highway, Moscow, 129337

References

  1. Anisimova S.V., Shurygina Yu.N., Pavlikova S.M., Korshunov A.E. Polymer water dispersions in dry construction mix application technologies. Stroitel’nye Materialy [Construction Materials]. 2018. No. 3, pp. 80–85. (In Russian). EDN: YUZSUM
  2. Anisimova S.V., Korshunova A.E., Pavlikova S.M., Shurygina Yu.N. Use of polymer water dispersions in primers for porous mineral substrates. Privolzhskiy Nauchnyy Zhurnal. 2015. No. 4, pp. 61–69. (In Russian). EDN: OUGASB
  3. Novikova S.K. Shtukaturno-dekorativnyye i oblitsovochnyye raboty [Plastering, decorative and facing works]. Moscow: Knorus, 2021. 258 p. EDN: QMTNKQ
  4. Pustovgar A.P., Kostikov M.A. Primers based on aqueous polymer dispersions. Stroitel’nye Materialy [Construction Materials]. 2006. No. 6, pp. 64–67. (In Russian). EDN: HTVAFH
  5. Khamidulina D.D., Tkacheva T.A., Maksimov A.A., Podushkin S.S. Effect of primer on the adhesion strength between the concrete and plaster surfaces. Actual Problems of Modern Science, Technology, and Education. Abstracts of the 79th International Scientific and Technical Conference. 2021. No. 1, p. 445. (In Russian). EDN: ZNHCWH
  6. Pichugin A.P., Khritankov V.F., Smirnova O.E., Pimenov E.G., Nikitenko K.A. Protective and finishing compositions and compounds for repair work and ensuring the durability of buildings. Izvestiya of higher educational institutions. Construction. 2019. No. 9 (729), pp. 109–122. (In Russian). EDN: JBRTZO
  7. Paruta V.A., Brynzin E.V., Grinfeld G.I. Physicomechanical principles of designing plaster mortars for aerated concrete masonry. Stroitel’nye Materialy [Construction Materials]. 2015. No. 8, pp. 30–34. (In Russian). EDN: UHHPEL
  8. Zhukov A.D., Bessonov I.V., Kulapin A.V., Medvedev A.A., Demisse B.A., Poudel R.S. Facade plaster systems using a modified binder. Stroitel’nye Materialy [Construction Materials]. 2022. No. 11, pp. 37–41. (In Russian). EDN: SKNFOC
  9. Ilyina L.V., Tulyaganov A.K. Use of mineral fibers in plaster cement mixtures to improve the performance characteristics of the solution. Regionalnaya Arhitectura i Stroitel’stvo. 2020. No. 3 (44), pp. 5–11. (In Russian). EDN: QNUCVK
  10. Anisimova S.V., Shurygina Yu.N., Pavlikova S.M. Use of styrene-acrylic dispersions for priming mineral porous surfaces. Privolzhskiy Nauchnyy Zhurnal. 2018. No. 4, pp. 78–86. EDN: YTVXZB
  11. Kuznetsova V.A., Petrova A.P., Shapovalov G.G., Emelianov V.V. Influence of technological modes of adhesion primer formation on the properties of the coating, as well as the strength of adhesive joints made using an adhesion primer. Klei. Germetiki. Tekhnologii. 2022, pp. 15–21. (In Russian). EDN: JHFGBJ

Supplementary files

Supplementary Files
Action
1. JATS XML
Download
2. Fig. 1. Graph of the dependence of water absorption of aerated concrete (a) and gypsum plaster (b) through the Karsten tube on the test time

Download (1MB)
Indexing metadata
3. Fig. 2. The adhesion value of concrete contacts (a) and quartz soils (b) to the concrete base

Download (950KB)
Indexing metadata
4. Fig. 3. The influence of concrete contacts (a) on the adhesion of the adhesive mortar mixture and quartz primers (b) on the adhesion of polymer plaster to the concrete base

Download (853KB)
Indexing metadata

Copyright (c) 2025 ООО РИФ "СТРОЙМАТЕРИАЛЫ"