Problems and solutions of materials localization while nuclear power plants construction abroad

封面

如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅或者付费存取

详细

Comparison between Russian and foreign standards requirements for waterproofing materials, namely, non-curing mastics using for buildings and structures isolation from groundwater and roofs insulation from leaks was done. An assessment of the difficulties encountered in finding design materials analogues was carried out. The main problem that is to search for the design material replacement according to parameters laid down in a project, which is difficult because of differences in approaches of choosing and determining the using materials parameters, was considered. Using the example of foreign-manufactured mastic, solutions for searching to analog materials in the facilities construction including nuclear power plants (NPP) abroad were proposed.

全文:

受限制的访问

作者简介

N. Andreeva

National Research Moscow State University of Civil Engineering

编辑信件的主要联系方式.
Email: andreevanp@mgsu.ru

Research Institute of Construction and Mechanics, Candidate of Sciences (Chemistry), Senior Researcher

俄罗斯联邦, 26, Yaroslavskoe Highway, Moscow, 129337

A. Pustovgar

National Research Moscow State University of Civil Engineering; Mechanical Engineering Research Institute of the Russian Academy of Sciences

Email: pustovgarap@mgsu.ru

Candidate of Sciences (Engineering), Scientific Supervisor, Research Institute of Building Materials and Technologies, Senior Researcher

俄罗斯联邦, 26, Yaroslavskoe Highway, Moscow, 129337; 4, Maly Kharitonyevsky Lane, Moscow, 101000

A. Adamtsevich

National Research Moscow State University of Civil Engineering

Email: adamtsevichao@mgsu.ru

Research Institute of Construction and Mechanics, Candidate of Sciences (Engineering), Senior Researcher

俄罗斯联邦, 26, Yaroslavskoe Highway, Moscow, 129337

参考

  1. Tekhnicheskoye regulirovaniye v stroitel’stve. Analiticheskiy obzor mirovogo opyta [Technical regulation in construction. An analytical review of world experience. Edited by A. Serykh]. Chicago: SNIP. 2010. 889 p.
  2. Tur V.V., Kolchunov V.I., Tamrazyan A.G. Safety of buildings and structures from the perspective of new parametric standardization requirements. Promyshlennoe i Grazhdanskoe Stroitel’stvo. 2025. No. 4, pp. 4–15. (In Russian). EDN: AXLAJQ. https://doi.org/10.33622/0869-7019.2025.04.04-15
  3. Savenkov A.N. Methodological approaches to the development of technical standardization in construction. Promyshlennoe i Grazhdanskoe Stroitel’stvo. 2021. No. 7, pp. 51–57. (In Russian). EDN: FTEEXA. https://doi.org/10.33622/0869-7019.2021.07.51-57
  4. Abelev M. Yu. Quality of construction works: standards in construction. Standarty i Kachestvo. 2018. No. 10, p. 94. (In Russian). EDN: YAKXJZ
  5. Pustovgar A.P., Andreeva N.P. Application of the parametric method of standardization in the construction industry. Standarty i Kachestvo. 2024. No. 1, pp. 95–99. (In Russian). EDN: KGMXUU. https://doi.org/10.35400/0038-9692-2024-1-208-23
  6. Basov A.V. Technical regulation and standardization in construction. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2019. No. 1–2, pp. 3–7. (In Russian). EDN: YYTEPJ. https://doi.org/10.31659/0044-4472-2019-1-2-3-7
  7. Bondar L.A., Soldatov V.A. On safety in the construction industry. Standarty i Kachestvo. 2021. No. 11, pp. 88–92. (In Russian). EDN: PVZECB
  8. Zhukov A.D., Bazhenova S.I., Stepina I.V. Evaluation of the adhesion strength of a waterproofing system Zhilishchnoe Stroitel’stvo [Housing Construction]. 2023. No. 9, pp. 102–107. (In Russian). EDN: JXIAMY. https://doi.org/10.31659/0044-4472-2023-9-102-107
  9. Yinghao Wang, Cheng Zheng, Yizhou Zhang, Dejia Tong, An-Ke Du, Xiaoya Yuan. Enhanced performance of cementitious capillary crystalline waterproofing materials modified by asphalt-derived low-cost carbon nanosheets. Construction and Building Materials. 2025.Vol. 490. 142541. https://doi.org/10.1016/j.conbuildmat.2025.142541
  10. Tsybenko A.V., Shalimov V.N., Goglev I.N., Loginova S.A. Performance of Logicbase™ polymer roll waterproofing material under multiaxial tensile stress. Promyshlennoe i Grazhdanskoe Stroitel’stvo. 2023. No. 3, pp. 74–79. (In Russian). EDN: XCANYN. https://doi.org/10.33622/0869-7019.2023.03.74-79
  11. Tikhomirov A.A., Izotov S.V. Experience in designing and implementing technical solutions for sealing expansion and construction joints of hydraulic structures using the injection method. Gidrotekhnicheskoe stroitel’stvo. 2020. No. 2, pp. 21–24. (In Russian). EDN: EQKCXS
  12. Zarubina L. Gidroizolyatsiya konstruktsiy, zdaniy i sooruzheniy [Waterproofing of structures, buildings, and structures]. St. Petersburg: BHV-Petersburg. 2011. 272 p. EDN: QIMFIE
  13. Mottaeva A.B. Current trends in nuclear power infrastructure development. Kuznechno-Shtampovochnoe Proizvodstvo. Obrabotka Materialov Davleniem. 2025. No. 3, pp. 182–188. (In Russian). EDN: TKWIRZ
  14. Grachev, V.A. Environmental safety of nuclear power plants. Ekologiya i Promyshlennost’ Rossii. 2020. Vol. 24. No. 3, pp. 44–50. (In Russian). EDN: CCQQDV. https://doi.org/10.18412/1816-0395-2020-3-44-50

补充文件

附件文件
动作
1. JATS XML
下载

版权所有 © ООО РИФ "СТРОЙМАТЕРИАЛЫ", 2025