ultra high molecular polyethylenetribological characteristicswearoxidationsterilizationy-radiationсверхвысокомолекулярный полиэтилентрибологические характеристикиизносокислениестерилизацияу-излучение1.Kurtz S.M., Ong K.L., Lau E., Widmer M., Maravic M., Gуmez-Barrena E. et al. International survey of primary and revision total knee replacement. Int. Orthop. 2011; 35: 1783-9.2.Falbrede I., Widmer M., Kurtz S., Schneidmbller D., Dudda M., R^er C. Verwendungsraten von Prothesen der unteren Extremitgt in Deutschland und der Schweiz Ein Vergleich der Jahre 2005-2008. Orthopade. 2011; 40 (9): 793-801.3.Khatod M., Inacio M., Paxton E.W., Bini S.A., Namba R.S., Burchette R.J. et al. Knee replacement: epidemiology, outcomes, and trends in Southern California: 17,080 replacements from 1995 through 2004. Acta Orthop. 2008; 79 (6): 812-9.4.Puolakka T. Cementless total hip prostheses and polyethylene liner wear. Academic dissertation. University of Tampere. 2003.5.Bozic K.J., Kurtz S., Lau E., Ong K., Chiu V., Vail T.P. et al. The epidemiology of bearing surface usage in total hip arthroplasty in the United States. J. Bone Jt Surg. Am. 2009; 91 (7): 1614-20.6.Garcia-Rey E., Garcia-Cimbrelo E. Polyethylene in total hip arthroplasty: half a century in the limelight. J. Orthop. Traum. 2010; 11: 67-72.7.Charnley J. Surgery of the hip-joint: present and future developments. Br. Med. J. 1960; 1 (5176): 821-6.8.Charnley J. Arthroplasty of the hip. A new operation. Lancet. 1961; 1 (7187): 1129-32.9.Charnley J. Present status of total hip replacement. Ann. Rheum. Dis. 1971; 30 (6): 560-4.10.Charnley J. Long-term results of low-friction arthroplasty. Hip. 1982: 42-9.11.Brach Del Prever E.M., Bistolfi A., Bracco P., Costa L. UHMWPE for arthroplasty: past or future? J. Orthop. Traum. 2009; 10: 1-8.12.Tower S.S., Currier J.H., Currier B.H., Lyford K.A., Van Citters D.W., Mayor M.B. Rim cracking of the cross-linked longevity polyethylene acetabular liner after total hip arthroplasty. J. Bone Jt Surg. Am. 2007; 89 (10): 2212-7.13.Kurtz S.M., ed. UHMWPE Biomaterials Handbook, 2nd ed. Ultra high molecular wight polyethylene in total joint replacement and medical devices. Elsevier Academic Press. 2009: 1-30, 72-6, 97-116, 197-408, 423-32.14.Digas G. New polymer materials in total hip arthroplasty. Evaluation with radiostereometry, bone densitometry, radiography and clinical parameters. Acta Orthop. 2005; 76 (315): 3-82.15.Connelly G.M., Rimnac C.M., Wright T.M., Hertzberg R.W., Manson J.A. Fatigue crack propagation behavior of ultrahigh molecular weight polyethylene. J. Orthop. Res. 1984; 2 (2): 119-25.16.Glyn-Jones S., McLardy-Smith P., Gill H.S., Murray D.W. The creep and wear of highly cross-linked polyethylene: a three-year randomised, controlled trial using radioster- eometric analysis. J. Bone Jt Surg. Br. 2008: 90 (5): 556-61.17.Muratoglu O.K., Greenbaum E.S., Bragdon C.R., Jasty M., Freiberg A.A., Harris W.H. Surface analysis of early retrieved acetabular polyethylene liners: a comparison of conventional and highly crosslinked polyethylenes. J. Arthroplasty. 2004; 19 (1): 68-77.18.Mutimer J., Devane P.A., Adams K., J. Geoffrey Horne J.G. Highly crosslinked polyethylene reduces wear in total hip arthroplasty at 5 years. Clin. Orthop. Relat. Res. 2010; 468: 3228-33.19.Hernigou P., Poignard A., Filippini P., Zilber S. Retrieved unicompartmental implants with full PE tibial components: the effects of knee alignment and polyethylene thickness on creep and wear. Open Orthop. J. 2008; 11: 51-6.20.Kurtz S.M., Hozack W., Marcolongo M., Turner J., Rimnac C., Edidin A. Degradation of mechanical properties of UHMWPE acetabular liners following long-term implantation. J. Arthroplasty. 2003; 18 (7 Suppl. 1): 68-78.21.Gomez-Barrena E., Puertolas J-A. Update on UHMWPE research. From the bench to the bedside. Acta Orthop. 2008; 79 (6): 832-40.22.Kurtz S.M., Gawel H.A., Patel J.D. History and systematic review of wear and osteolysis outcomes for first-generation highly crosslinked polyethylene. Clin. Orthop. Relat. Res. 2011; 469: 2262-7.23.Dolan M.M., Kelly N.H., Nguyen J.T., Wright T.M., Haas S.B. Implant design influences tibial post wear damage in posterior-stabilized knees. Clin. Orthop. Relat. Res. 2011; 469: 160-7.24.Little N.J., Busch C.A., Gallagher J.A., Rorabeck C.H., Bourne R.B. Acetabular polyethylene wear and acetabular inclination and femoral offset. Clin. Orthop. Relat. Res. 2009; 467: 2895-2900.25.Patil S., Bergula A., Chen P.C., Colwell C.W. Jr, D’Lima D.D. Polyethylene wear and acetabular component orientation. J. Bone Jt Surg. Am. 2003; 85 (Suppl. 4): 56-63.26.Jaffe W.L., Strauss E.J., Cardinale M., Herrera L, Kummer F.J. Surface oxidized zirconium total hip arthroplasty head damage due to closed reduction: effects on polyethylene wear. J. Arthroplasty. 2009; 24 (6): 898-902.27.Tipper J.L, Ingham E., Hailey J.L., Besong A.A., Fisher J. et al. Quantitative analysis of polyethylene wear debris, wear rate and head damage in retrieved Charnley hip prostheses. J. Mater. Sci. Mater. Med. 2000; 11 (2): 117-24.28.Sorimachi T, Clarke I.C., Williams P.A., Gustafson A., Yamamoto K. Third-body abrasive wear challenge of 32 mm conventional and 44 mm highly crosslinked polyethylene liners in a hip simulator model. Proc. Inst. Mech. Eng. H. 2009; 223 (5): 607-23.29.Al-Hajjar M., Leslie I.J., Tipper J., Williams S., Fisher J., Jennings L.M. Effect of cup inclination angle during microseparation and rim loading on the wear of BIOLOX® delta ceramic-on-ceramic total hip replacement. J. Bi- omed. Mater. Res. B. Appl. Biomater. 2010; 95 (2): 263-8.30.Mak M., Jin Z., Fisher J., Stewart T.D. Influence of acetabular cup rim design on the contact stress during edge loading in ceramic-on-ceramic hip prostheses. J. Arthroplasty. 2011; 26 (1): 131-6.31.Senden D.J.A. Constitutive modeling of medical grade ultra-high molecular weight polyethylene. Master external assessment. Eindhoven; 2008.32.Shen F.W., Lu Z., McKellop H.A. Wear versus thickness and other features of 5-Mrad crosslinked UHMWPE acetabular liners. Clin. Orthop. Relat. Res. 2011; 469: 395-404.33.Usrey M.M., Noble P.C., Rudner L.J., Rudner L.J., Con- ditt M.A., Birman M.V. Does neck/liner impingement increase wear of ultrahigh-molecular-weight polyethylene liners? J. Arthroplasty. 2006; 21 (6 Suppl. 2): 65-71.34.Urquhart A.G., D’Lima D.D., Venn-Watson E., Colwell C.W. Jr, Walker R.H. Polyethylene wear after total hip arthroplasty: the effect of a modular femoral head with an extended flange-reinforced neck. J. Bone Jt Surg. Am. 1998; 80 (11): 1641-7.35.Rao A.R., Engh G.A., Collier M.B., Lounici S. Tibial interface wear in retrieved total knee components and correlations with modular insert motion. J. Bone Jt Surg. Am. 2002; 84 (10): 1849-55.36.Delport H.P., Sloten J.V., Bellemans J. Comparative gravimetric wear analysis in mobile versus fixed-bearing posterior stabilized total knee prostheses. Acta Orthop. Belg. 2010; 76 (3): 367-73.37.Булгаков В.Г., Ильина В.К., Гаврюшенко Н.С., Шальнее А.Н., Омельяненко Н.П. Трибохимический компонент развития окислительного стресса при имплантации искусственных суставов. Часть 2. Проокислитель- ный и антипролиферативный эффект частиц износа ортопедических материалов. Вестник травматол. ортопед. 2010; 3: 29-33.38.Ezzet K.A., Hermida J.C., Steklov N.D., Lima D.D. Wear of polyethylene against oxidized zirconium femoral components effect of aggressive kinematic conditions and malalignment in total knee arthroplasty. J. Arthroplasty. 2012; 27 (1): 116-21.39.Roy M.E., Whiteside L.A., Magill M.E., Katerberg B.J. Reduced wear of cross-linked UHMWPE using magnesia- stabilized zirconia femoral heads in a hip simulator. Clin. Orthop. Relat. Res. 2011; 469: 2337-45.40.Ильин А.А., Мамонов А.М., Скворцова С.В., Петров Л.М., Мамаев В.С. Некоторые инновационные технологии в производстве медицинских имплантатов из титановых сплавов. Технология легких сплавов. 2007; 3: 131-7.41.Cassar G., Banfield S., Avelar-Batista Wilson J-C., Hous-den J., Matthews A., Leyland A. Impact wear resistance of plasma diffusion treated and duplex treated/PVDcoated Ti-6Al-4V alloy. Surf. Coat. Techn. 2012; 206: 2629-32.42.Liu C., Bi Q., Matthews A. Tribological and electrochemical performance of PVD TiN coatings the femoral head of Ti-6Al-4V artificial joints. Surf. Coat. Techn. 2003; 163164: 597-604.43.Atkins G.J., Haynes D.R., Howie D.W., Findlay D.M. Role of polyethylene particles in peri-prosthetic osteolysis: A review. World J. Orthop. 2011; 2 (10): 93-101.44.Rocha M.F.D., Mansur A.A.P., Martins C.P.S., Barbosa-Stancioli E.F., Mansur H.S. Macrophage response to UH-MWPE submitted to accelerated ageing in hydrogen peroxide. Open Biomed. Eng. J. 2010; 4: 107-112.45.Holding C.A., Findlay D.M., Stamenkov R, Neale S.D., Lucas H., Dharmapatni A.S. et al. The correlation of RANK, RANKL and TNFalpha expression with bone loss volume and polyethylene wear debris around hip implants. Biomaterials. 2006; 27 (30): 5212-9.46.Hopper R.H. Jr., Young A.M., Orishimo K.F., Engh C.A. Jr. Effect of terminal sterilization with gas plasma or gamma radiation on wear of polyethylene liners. J. Bone Jt Surg. Am. 2003; 85 (3): 464-8.47.Eyerer P., Ke Y.C. Property changes of UHMW polyethylene hip cup endoprostheses during implantation. J. Bi-omed. Mater. Res. 1984; 18 (9): 1137-51.48.Kurtz S.M., Rimnac C.M., Hozack W.J., Turner J., Marco-longo M., Goldberg V.M. et al. In vivo degradation of polyethylene liners after gamma sterilization in air. J. Bone Jt Surg. Am. 2005; 87 (4): 815-23.49.Medel F.J., Kurtz S.M., Hozack W.J., Parvizi J., Purtill J.J., Sharkey P.F. et al. Gamma inert sterilization: a solution to polyethylene oxidation? J. Bone Jt Surg. Am. 2009; 91 (4): 839-49.50.Collier J.P., Currier B.H., Kennedy F.E., Currier J.H., Timmins G.S., Jackson S.K. et al. Comparison of crosslinked polyethylene materials for orthopaedic applications. Clin. Orthop. Relat. Res. 2003; 414: 289-304.51.MacDonald D., Sakona A., Ianuzzi A., Rimnac C.M., Kurtz S.M. Do first-generation highly crosslinked polyethylenes oxidize in vivo? Clin. Orthop. Relat. Res. 2011; 469: 2278-85.52.Estok D.M. 2nd, Burroughs B.R., Muratoglu O.K., Harris W.H. Comparison of hip simulator wear of 2 different highly cross-linked ultra high molecular weight polyethylene acetabular components using both 32- and 38-mm femoral heads. J. Arthroplasty. 2007; 22 (4): 581-9.53.Lee J.H., Lee B.W., Lee B.J., Kim S.Y. Midterm results of primary total hip arthroplasty using highly cross-linked polyethylene: minimum 7-year follow-up study. J. Arthroplasty. 2011; 26 (7): 1014-19.54.Galvin A.L., Jennings L.M., Tipper J.L., Ingham E., Fisher J. Wear and creep of highly crosslinked polyethylene against cobalt chrome and ceramic femoral heads. Proc. Inst. Mech. Eng. H. 2010; 224 (10): 1175-83.55.Minoda Y., Kobayashi A., Sakawa A., Aihara M., Tada K., Sugama R. et al. Wear particle analysis of highly crosslinked polyethylene isolated from a failed total hip arthroplasty. J. Biomed. Mater. Res. B. Appl. Biomater. 2008; 86 (2): 501-5.56.Green T.R., Fisher J., Matthews J.B., Stone M.H., Ingham E. Effect of size and dose on bone resorption activity of macrophages by in vitro clinically relevant ultra high molecular weight polyethylene particles. J. Biomed. Mater. Res. 2000; 53 (5): 490-7.57.Baxter R.M., Freeman T.A., Kurtz S.M., Steinbeck M.J. Do tissues from THA revision of highly crosslinked UHMWPE liners contain wear debris and associated inflammation? Clin. Orthop. Relat. Res. 2011; 469 (8): 2308-17.58.Leung S.B., Egawa H., Stepniewski A., Beykirch S., Engh C.A. Jr, Engh C.A. Sr. Incidence and volume of pelvic osteolysis at early follow-up with highly cross-linked and noncross-linked polyethylene. J. Arthroplasty. 2007; 22 (6 Suppl. 2): 134-9.59.Wroblewski B.M., Siney P.D., Fleming P.A. Low-friction arthroplasty of the hip using alumina ceramic and cross-linked polyethylene. A 17-year follow-up report. J. Bone Jt Surg. Br. 2005; 87 (9): 1220-21.60.Lachiewicz P.F., Heckman D.S., Soileau E.S., Mangla J., Martell J.M. Femoral head size and wear of highly crosslinked polyethylene at 5 to 8years. Clin. Orthop. Relat. Res. 2009; 467 (12): 3290-96.61.Muratoglu O.K., Bragdon C.R., O’Connor D. Perinchief R.S., Estok D.M. 2nd, Jasty M., Harris W.H. Larger diameter femoral heads used in conjunction with a highly crosslinked ultra-high molecular weight polyethylene: a new concept. J. Arthroplasty. 2001; 16 (8 Suppl. 1): 24-30.62.Kurtz S.M., Medel F.J., MacDonald D.W., Parvizi J, Kraay M.J., Rimnac C.M. Reasons for revision of first-generation highly cross-linked polyethylenes. J. Arthroplasty. 2010. 25 (6): 67-74.63.Gencur S.J., Rimnac C.M., Kurtz S.M. Fatigue crack propagation resistance of virgin and highly crosslinked, thermally treated ultra-high molecular weight polyethylene. Biomaterials. 2006; 27 (8): 1550-77.64.Gomoll A, Wanich T, Bellare A. J-integral fracture toughness and tearing modulus measurement of radiation crosslinked UHMWPE. J. Orthop. Res. 2002; 20 (6): 1152-56.65.Oral E., Malhi A.S., Muratoglu O.K. Mechanisms of decrease in fatigue crack propagation resistance inirradiated and melted UHMWPE. Biomaterials. 2006; 27 (6): 917-25.66.Huot J.C., Van Citters D.W., Currier J.H., Currier B.H., Mayor M.B., Collier J.P. Evaluating the suitability of highly cross-linked and remelted materials for use in posterior stabilized knees. J. Biomed. Mater. Res. B. Appl. Biomater. 2010; 95 (2): 298-307.67.Duffy G.P., Wannomae K.K., Rowell S.L., Muratoglu O.K. Fracture of a cross-linked polyethylene liner due to impingement. J. Arthroplasty. 2009; 24 (1): 158.e15-158.e19.68.Moore K.D., Beck P.R., Petersen D.W., Cuckler J.M., Lemons J.E., Eberhardt A.W. Early failure of a crosslinked polyethylene acetabular liner. A case report. J. Bone Jt Surg. Am. 2008; 90 (11): 2499-2504.69.Wang A., Yau S.-S., Essner A., Herrera L, Manley M., Dumbleton J. A Highly Crosslinked UHMWPE for CR and PS Total Knee Arthroplasties. J. Arthroplasty. 2008; 23 (4): 559-66.70.Currier B.H., Van Citters D.W., Currier J.H., Collier J.P. In vivo oxidation in remelted highly cross-linked retrievals. J. Bone Jt Surg. Am. 2010; 92 (14): 2409-18.71.Micheli B.R., Wannomae K.K., Lozynsky A.J., Christensen S.D., Muratoglu O.K. Knee simulator wear of vitamin E stabilized irradiated ultrahigh molecular weight polyethylene. J. Arthroplasty. 2012; 27 (1): 95-104.72.Bracco P., Oral E. Vitamin E-stabilized UHMWPE for total joint implants: a review. Clin. Orthop. Relat. Res. 2011; 469: 2286-93.73.Rowell S.L., Oral E., Muratoglu O.K. Comparative oxidative stability of 6-tocopherol blended and diffused UH-MWPEs at 3 years of real-time aging. J. Orthop. Res. 2011; 29 (5): 773-80.74.Oral E., Wannomae K.K., Rowell S.L., Muratoglu O.K. Diffusion of vitamin E in ultra-high molecular weight polyethylene. Biomaterials. 2007; 28 (35): 5225-37.75.Oral E., Christensen S.D., Malhi A.S., Wannomae K.K., Muratoglu O.K. Wear resistance and mechanical properties of highly cross-linked, ultrahigh-molecular weight polyethylene doped with vitamin E. J. Arthroplasty. 2006; 21 (4): 580-91.76.Stoller A.P., Johnson T.S., Popoola O.O., Humphrey S.M., Blanchard C.R. Highly crosslinked polyethylene in posterior-stabilized total knee arthroplasty: in vitro performance evaluation of wear, delamination, and tibial post durability. J. Arthroplasty. 2011; 26 (3): 483-91.