Bulletin of the Russian Military Medical AcademyBulletin of the Russian Military Medical Academy1682-73922687-1424Eco-Vector2069910.17816/brmma20699Research ArticleThe experience of application of additive technologies in the military medical organizations and the Military innovation technopolis «ERA»PeleshokS. A.vmeda-nio@mil.ruZheleznyakI. S.vmeda-nio@mil.ruOvchinnikovD. V.vmeda-nio@mil.ruNagibovichO. A.vmeda-nio@mil.ruKushnarevS. V.vmeda-nio@mil.ruShirshinA. V.vmeda-nio@mil.ruBolekhanV. N.vmeda-nio@mil.ruAdamenkoV. N.vmeda-nio@mil.ruGaivoronskyI. V.vmeda-nio@mil.ruRudchenkoI. V.vmeda-nio@mil.ruDemyanenkoV. A.vmeda-nio@mil.ruSokurenkoR. S.vmeda-nio@mil.ruNebylitsaYa. I.vmeda-nio@mil.ruDavidenkoT. A.vmeda-nio@mil.ruS.M. Kirov Military Medical AcademyMilitary Innovation Technopolis “ERA”8th Scientific Company of the Main Military Medical Department1509201921312613117022020Copyright © 2019, Peleshok S.A., Zheleznyak I.S., Ovchinnikov D.V., Nagibovich O.A., Kushnarev S.V., Shirshin A.V., Bolekhan V.N., Adamenko V.N., Gaivoronsky I.V., Rudchenko I.V., Demyanenko V.A., Sokurenko R.S., Nebylitsa Ya.I., Davidenko T.A.2019<p>The prospects for the development and objectives of the Military Innovation Technopolis «ERA» for the search, development and implementation of advanced ideas and developments, breakthrough technologies in strengthening the defense capability of the Russian Federation are discussed. According to the scientific direction «Biotechnical Systems and Technologies», a testing laboratory of biomedical and additive technologies was created in the Military Innovation Technopolis «ERA» to study 3D printing technologies of models of organs, tissues and medical devices for use in military medicine. Highlights the issues of testing and implementation of medical products manufactured using 3D printing (models of preoperative (pathological) organs, tires and langets, anatomical models of complex bones and elements of the human skeleton) with the participation of Military innovation technopolis «ERA» and the S.M. Kirov Military Medical Academy to medical institutions of the Ministry of Defense of the Russian Federation, for use in preoperative planning, training, training of doctors, rehabilitation. In November 2018, the country’s supreme leaders visited Military Innovation Technopolis «ERA», to which the first results of the technopolis were presented, including the testing laboratory of biomedical and additive technologies. In the laboratory, more than 150 models of complex bones and skeleton elements were made, which are used to train cadets and students of the S.M. Kirov Military Medical Academy at the Department of Normal Anatomy. More than a dozen organ layouts with various pathologies were created and sent to military hospitals and clinics fractures of the bones of the hand and forearm. Unique medical devices are created, for example, a holder for an ultrasound device sensor. A clinical example of the use of a preoperative model for planning an operation to remove an aortic aneurysm in the Military Innovation Technopolis is given. In the main and central military clinical hospitals of the Ministry of Defense of the Russian Federation, working groups have been created for the introduction of additive technologies, at whose meetings the use of 3D printing technologies in personalized military medicine is discussed. The use of three-dimensional printing in military medicine will significantly improve the traditional methods of visualization and, accordingly, diagnostic and treatment of pathology.</p>three-dimensional printing3D-printing in medicineanatomical models of bonespreoperative modelssplintsmedical productspreoperative planningmodels of bodiesthe personalized medicineinteraction of the medical organizationsтрехмерная печать3D-печать в медицинеанатомические модели костейпредоперационные макетылонгетыизделия медицинского назначенияпредоперационное планированиемакеты органовперсонализированная медицинавзаимодействие медицинских организаций[Донских, Д.А. Использование 3D-принтера в стоматологии / Д.А. Донских // Бюлл. мед. Интернет-конференций. – 2017. – Т. 7.– № 1. – С. 401.][Зотова, А.А. Актуальность применения 3D-принтеров в современной стоматологии / А.А. Зотова, К.Д. Вдовенко // Бюлл. мед. Интернет-конференций. – 2017. – Т. 5. – № 11. – С. 1284.][Карякин, Н.Н. Правовое регулирование изготовления изделий медицинского назначения с использованием 3D-печати: современное состояние проблемы / Н.Н. Карякин [и др.] // Травматология и ортопедия России. – 2018. – Т. 24, № 4. – С. 129–136.][Керимбаев, Т.Т. Обзор применения 3D технологий в хирургическом лечении опухолей позвоночника / Т.Т. Керимбаев [и др.] // Нейрохирургия и неврология Казахстана. – 2017. – № 4. – С. 61–65.][Лазаренко, В.А. Использование 3D-принтеров в хирургии (обзор литературы) / В.А. Лазаренко [и др.] // Курский научн.-практ. вестн. «Человек и его здоровье». – 2018. – № 4. – С. 61–65.][Методические рекомендации по трехмерному моделированию и печати в военно-медицинских организациях. – СПб., 2019. – 28 с.][Нагибович, О.А. 3D-печать для медицины / О.А. Нагибович [и др.] // Первая российская конференция: физика – наукам о жизни: мат. науч. конф. – СПб., 2016. – С. 155.][Нагибович, О.А. Применение технологии 3D-печати в медицине / О.А. Нагибович [и др.] // Клин. патофизиол. – 2017. – Вып. 23, № 3. – С. 14–21.][Панагов, З.Г. Применение современных технологий 3D печати в медицине (обзор литературы) / З.Г. Панагов // Научные горизонты. – 2018. – № 1. – С. 169–174.][Указ Президента Российской Федерации от 25 июня 2018 г. № 364 // Росс. газета. – 2018. 26 июн.]