Process control while maintaining the quality of additive manufacturing objectsн

Cover Page

Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription or Fee Access

Abstract

An important task of materials science is to study the strength of complex objects used in structures and applied areas. These objects are created within the framework of additive manufacturing, where control at all stages is required. А computer-aided design system for additive manufacturing is proposed, and its functional diagram is presented. The features of multi-criteria optimization of the technological process are considered, and the results of applying the adaptive control algorithm with model adjustment are presented.

Full Text

Restricted Access

About the authors

A. P. Preobrazhensky

Voronezh Institute of High Technologies

Author for correspondence.
Email: app@vivt.ru

Dr. Tech. Sc., Professor

Russian Federation, Voronezh

T. V. Avetisyan

Voronezh Institute of High Technologies

Email: vtatyana_avetisyan@mail.ru

Lecturer

Russian Federation, Voronezh

N. N. Krivenko

Voronezh Institute of High Technologies

Email: krivenko_nadin@mail.ru

Lecturer

Russian Federation, Voronezh

Yu. P. Preobrazhensky

Voronezh Institute of High Technologies

Email: petrovich@vivt.ru

Cand. of Tech. Sc., Assistant Professor

Russian Federation, Voronezh

References

  1. Trubashevsky D. B. Additive sketches, or Solutions for those who do not want to continue losing money, Voronezh, Smart production, 2021, 203 p. (in Russian).
  2. Kozlova D. N., Preobrazhensky A. P., Tokareva N. M., Shunulina V. V. Problems of analytical control in foundry and additive manufacturing, Vestnik Voronezhskogo instituta vysokih tekhnologij, 2022, no. 3 (42), pp. 21—23 (in Russian).
  3. Pat. 2722525 RU IPC IPC G06N 20/00, B29C 64/393, B33Y 50/02 Adaptive control of additive manufacturing processes in real time using machine learning, Mehr E., Ellis T., Noon D., declared. 23.05.2018, published 01.06.2020 Bulletin No. 16, 79 p. (in Russian).
  4. Soboleva P. V., Knyazeva А. G. Numerical study of the influence of optical properties of the powder medium on the nature of the temperature distribution during laser processing, Matematicheskoe modelirovanie v estestvennyh naukah, 2016, vol. 1, pp. 348—353 (in Russian).
  5. Khamidullin B. A., Mansurov Sh. R., Rakhimova L. R., Romanova D. S., Tsivilsky I. V. Modeling the dynamics, structural mechanics and heat transfer of powder particles for additive laser technologies, Additivnye tekhnologii: nastoyashchee i budushchee, materialy IV mezhdunarodnoj konferencii (Moscow, March 30, 2018), pp. 142—156 (in Russian).
  6. Abramov I. V. Digital additive manufacturing management: features and prospects, Ekonomika i upravlenie, 2023, vol. 29, no. 5, pp. 574—580 (in Russian).
  7. Grechukhin A. N., Kuts V. V., Razumov M. S., Vanin I. V. Dynamic control of the additive forming process using 5-coordinate technological equipment, Izvestiya YUgo-Zapadnogo gosudarstvennogo universiteta, 2019, vol. 23, no. 1, pp. 8—20 (in Russian).
  8. Shcherbakov A. V., Rodyakina R. V., Kozhechenko A. S., Vakhmyanin N. M., Gaponova D. A., Rubtsov V. P. Features of control of the process of electron-beam additive shaping, Elektronnaya obrabotka materialov, 2018, no. 2, pp. 54—62 (in Russian).
  9. Grigoriev S. N., Smurov I. Yu. Prospects for the development of innovative additive manufacturing in Russia and abroad, Innovacii, 2013, vol. 10, No. 180, pp. 76—82 (in Russian).
  10. Kosushkin P. Non-destructive quality control in additive manufacturing, Vektor vysokih tekhnologij, 2017, no. 2 (31), pp. 28—30 (in Russian).
  11. Shuvalova A. M., Filimonov A. S., Galinovsky А. L. Study of the possibility of using selective laser sintering technology for the manufacture of aerodynamic models, Vestnik Moskovskogo aviacionnogo institute, 2023, vol. 30, no. 2, pp. 46—50 (in Russian).
  12. Aleshin N. P., Grigoriev M. V., Shchipakov N. A., Prilutsky M. A., Murashov V. V. Application of non-destructive testing methods for assessing the quality of parts directly in the process of additive manufacturing, Defektoskopiya, 2016, no. 9, pp. 64—71 (in Russian).
  13. Lapach S. N. Planning in a passive experiment, Matematicheskie mashiny i sistemy, 2013, no. 4, pp. 156—160 (in Russian).
  14. Gibson I., Rosen D., Stucker В. Additive Manufacturing Technologies, Springer New York, 2015, 498 p.
  15. Galinovsky A. L., Filimonov A. S., Badanina Yu. V., Dolgikh А. I. Comparative and contrastive study of software packages for three-dimensional numerical modeling by analyzing the results of topological optimization of rocket and space technology products, Izvestiya vysshih uchebnyh zavedenij. Mashinostroeni, 2023, no. 1 (754), pp. 42—51 (in Russian).
  16. Kozlova D. N., Preobrazhensky A. P., Shunulina V. V. Analysis of the features of the methods used in the modeling of objects in additive technologies, Vestnik Voronezhskogo instituta vysokih tekhnologij, 2022, no. 2 (41), pp. 51—53 (in Russian).
  17. Kozlova D. N., Preobrazhensky A. P., Tokareva N. M., Shunulina V. V. Formation of 3D objects: some features, Vestnik Voronezhskogo instituta vysokih tekhnologij, 2022, no. 1 (40), pp. 61—63 (in Russian).
  18. Preobrazhensky A. P., Choporov O. N. Algorithmization and optimization of technological processes for creating integrated electronics products, Informacionnye tekhnologii modelirovaniya i upravleniya, 2017, vol. 104, no. 2, pp. 84—93 (in Russian).
  19. Lvovich I. Ya., Preobrazhensky A. P., Choporov O. N., Shcherbatykh S. S., Tambovtsev G. A. Development of a subsystem for optimizing the technological process of manufacturing electronic equipment, DSPA: Voprosy primeneniya cifrovoj obrabotki signalov, 2016, vol. 6, no. 4, pp. 717—720 (in Russian).
  20. Saati T. Decision Making. Hierarchy Analysis Method, Moscow, Radio and Communications, 1993, 278 p. (in Russian).
  21. Tsypkin Ya. Z. Fundamentals of Information Theory of Identification, Moscow, Nauka, 1984,320 p (in Russian).
  22. Balashov A. V., Markova M. I. Study of the Structure and Properties of Products Obtained by 3D Printing, Inzhenernyj vestnik Dona, 2019, no. 1 (52), pp. 66—80 (in Russian).
  23. Fayustov А. A. Once again about the criteria for filtering out gross errors, Zakonodatel’naya i prikladnaya metrologiya, 2016, no. 5, pp. 25—30 (in Russian).

Supplementary files

Supplementary Files
Action
1. JATS XML
Download
2. Рис. 1. Scheme of control implementation in additive manufacturing

Download (123KB)
Indexing metadata
3. Рис. 2. Modular CAD components for creating additive manufacturing objects

Download (170KB)
Indexing metadata

Copyright (c) 2026 Informacionnye Tehnologii


СМИ зарегистрировано Федеральной службой по надзору в сфере связи, информационных технологий и массовых коммуникаций (Роскомнадзор).
Регистрационный номер и дата принятия решения о регистрации СМИ: серия ПИ № 77 - 15565 от 02 июня 2003 г.