Comparative assessment of strength of dental CAD/CAM materials for chairside techniques

Abstract


The results ofphysico-mechanical tests showed the best strength values of samples of the hybrid ceramic VITA Enamic over the representatives of the other two groups: composites samples and ceramic samples.

Full Text

Restricted Access

About the authors

K. E Goryainova

The Moscow state university of medicine and dentistry named after A.I. Evdokimov of Ministry of Health of the Russian Federation

Email: kristina@dda-russia.ru
127473, Moscow, Russia
postgraduate of prosthetic dentistry department of the Moscow state university of medicine and dentistry named after A.I. Evdokimov

F. S Rusanov

Federal State Institution Central Research Institute of Dental and Maxillofacial Surgery of Ministry of Health of the Russian Federation

119034, Moscow, Russia

I. Ya Poyurovskaya

Federal State Institution Central Research Institute of Dental and Maxillofacial Surgery of Ministry of Health of the Russian Federation

119034, Moscow, Russia

M. V Retinskaya

Federal State Institution Central Research Institute of Dental and Maxillofacial Surgery of Ministry of Health of the Russian Federation

119034, Moscow, Russia

I. Yu Lebedenko

Federal State Institution Central Research Institute of Dental and Maxillofacial Surgery of Ministry of Health of the Russian Federation

119034, Moscow, Russia

References

  1. Klim J. Chairside CAD/CAM aesthetic restorations. Australas. Dent. Pract. 2009; 5: 146-56.
  2. Fasbinder D.J. Chairside CAD/CAM An overview of restorative material options. Compend. Contin. Educ. Dent. 2012; 33 (1): 52-8.
  3. Мельник А.С., Горяинова К.Э., Лебеденко И.Ю. Обзор современных материалов для изготовления керамических коронок у кресла пациента методом компьютерного фрезерования. Рос. стоматол. журн. 2014; (6): 24-8.
  4. Gerwin A. CAD/CAM: is a variety of materials a blessing or a curse. Dent. Vision. 2014; 1: 4-6.
  5. McLaren Ed., Puri S. CEREC materials overview. Different selections for milling restorations. CERECdoctors. 2013; 1: 52-5.
  6. Coldea A., Swain M.V., Thiel N. Mechanical properties of polymerinfiltrated-ceramic-network materials. Dent. Mater. 2013; 29: 419-26.
  7. Swain M.V., Coldea A., Bilkhair A., Guess P.C. Interpenetrating network ceramic-resin composite dental restorative materials. Dent. Mater. 2016; 32 (1): 34-42.

Statistics

Views

Abstract - 20

PDF (Russian) - 0

Cited-By


Article Metrics

Metrics Loading ...

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies