To determine the stress-strain state during incremental forming
- 作者: Petrov I.N.1,2
-
隶属关系:
- Samara National Research University
- Samara Federal Research Center of the Russian Academy of Sciences
- 期: 卷 25, 编号 3 (2023)
- 页面: 5-9
- 栏目: Articles
- URL: https://journals.eco-vector.com/1990-5378/article/view/624707
- DOI: https://doi.org/10.37313/1990-5378-2023-25-3-5-9
- ID: 624707
如何引用文章
全文:
详细
In this article, based on the experimental studies carried out, the scheme of the stress-strain state of workpieces during incremental forming is determined. It is determined that the incremental forming of a cone with a rectilinear generatrix is characterized by biaxial stretching with a predominance of tensile axial deformations.
作者简介
Ilya Petrov
Samara National Research University; Samara Federal Research Center of the Russian Academy of Sciences
编辑信件的主要联系方式.
Email: ilpetrof110895@yandex.ru
Engineer at the Metal Forming Department, Graduate Student of the Samara National Research University, Engineer of the Department of Metal Physics and Aviation Materials, Samara Federal Research Center of the Russian Academy of Sciences
俄罗斯联邦, Samara参考
- Shim M-S, Park J-J. The formability of aluminum sheet in incremental forming // J Mater Process Technol. 2001. №113. R. 654-8. EDN: KLQFLB
- Park J-J, Kim Y-H. Fundamental studies on the incremental sheet metal forming technique // J Mater Process Technol. 2003. №140. R. 447-53. EDN: KLRJMZ
- Tomlenov, A.M. Teoriya plasticheskogo deformirovaniya metallov [Tekst] / A.M. Tomlenov. - M.: Metallurgiya, 1972. - 408 s.
- Kolmogorov, V.L. Plastichnost' i razrushenie [Tekst] / V.L. Kolmogorov, A.A. Bogatov, B.A. Migachev i dr. - Pod nauch. red. V.L. Kolmogorova. - M.: Metallurgiya, 1977. - 336 s.
- Jackson K., Allwood J. The mechanics of incremental sheet forming // Journal of Materials Processing Technology. 2009. V. 209, Iss. 3, R. 1158-1174. EDN: KPUTIR
- Eyckens P., Belkassem B., Henrard C., Gu J., Sol H., Habraken A.M., Duflou J.R., van Bael A., van Houtte P. Strain evolution in the single point incremental forming process: digital image correlation measurement and finite element prediction // International Journal of Material Forming. 2011. V. 4, Iss. 1. P. 55-71. doi: 10.1007/s12289-010-0995-6 EDN: IWCFQG
- Eyckens P., Van Bael A., Van Houtte P. An extended Marciniak-Kuczynski model for anisotropic sheet subjected to monotonic strain paths with through-thickness shear // International Journal of Plasticity. 2011. V. 27, Iss. 10. R. 1577-1597. doi: 10.1016/j.ijplas.2011.03.008
- Eyckens P., He S., Van Bael A., Van Houtte P., Duflou J. Forming limit predictions for the serrated strain paths in single point incremental sheet forming // AIP Conference Proceedings. 2007. V. 908. P. 141-146. doi: 10.1063/1.2740802
- Filice L., Ambrogio G., Micari F. Online control of single point incremental forming operations through punch force monitoring [Text] // Cirp. Ann.-Manuf. Techn. 2006. №55. P. 245-248.
- Emmens W.C., Van den Boogaard A. An overview of stabilizing deformation mechanisms in incremental sheet forming [Text] // Journal of Materials Processing Technology.- 2009. - №209. - P. 3688-3695. EDN: KPUOPF
- Wei H.Y., Gao L., Li S.G., Investigation on thickness distribution along bulge type incrementally formed sheet metal part with irregular shapes // Proceedings of the International Manufacturing Conference. pp. 1672-3961 (Supp-01).
补充文件
