Vestnik of Samara State Technical University. Technical Sciences SeriesVestnik of Samara State Technical University. Technical Sciences Series1991-85422712-8938Samara State Technical University1999010.14498/tech.2014.3.%uResearch ArticleDevelopment of thermal model spindle assembly machine toolDenisenkoAlexander F(Dr. Sci. (Techn.)), Professor-NazarovNikita SPostgraduate Student-Samara State Technical University150920142239310410022020Copyright © 2014, Samara State Technical University2014The aspects of appearance and effect of thermal deformations of machine tools are considered in this paper. On the design of the spindle unit the factors affecting the formation of the thermal patter are examined. Heat sources of spindle assemblies are defined. The process of heat flow through the joint parts is described. The technique of forming a thermal model of the machine tool spindle assembly with the heat flow through the connection with the thermal resistance is developed. On the basis of numerical simulations the effect of quality of treatment, wetted parts, the convection of conjugate parts of the material in the depressions and micro- macroroughnesses on the thermal conductivity of the contact are estimated . The influence estimation of these factors with the account of the effect of time parameter, the value of real contact area and its location within the area of conjugation is made.spindle assemblyheat flowthe actual contact areathe thermal contact resistanceшпиндельный узелтепловой потокфактическая площадь контактатермическое контактное сопротивление[Проников А.С. Проектирование металлорежущих станков и станочных систем: справочник-учебник в 3 т. / А.С. Проников, О.И. Аверьянов, Ю.С. Аполлонов [и др.]; под ред. А.С. Проникова. - М.: МГТУ им. Н.Э. Баумана, Машиностроение, 1994. - Т. 1. Проектирование станков. - 444 с.][Шлыков Ю.П., Ганин Е.А. Контактный теплообмен. - М.-Л.: Госэнергоиздат, 1963. - 144 с.][Шлыков Ю.П., Ганин Е.А., Царевский С.Н. Контактное термическое сопротивление. - М.: Энергия, 1977. - 328 с.][Попов В.М. Теплообмен в зоне контакта разъемных и неразъемных соединений. - М.: Энергия, 1971. - 216 с.][Клаузинг А.М., Чао Б.Т. Термическое сопротивление контакта в вакууме // Тр. Американского общества инженеров-механиков. - 1965. - № 2. - С. 98-116.][Денисенко А.Ф., Новиков А.Ю. Контактное термическое сопротивление станочных соединений // Актуальные проблемы трибологии: Сб. трудов международной науч.-техн. конференции. - Самара, 2007. С. 177-185.][Авчухов В.В., Паюсте Б.Я. Задачник по процессам тепломассообмена. - М.: Энергоатомиздат, 1986. - 144 с.]