Vestnik of Samara State Technical University. Technical Sciences SeriesVestnik of Samara State Technical University. Technical Sciences Series1991-85422712-8938Samara State Technical University2015110.14498/tech.2016.1.%uResearch ArticleThe induction heating system in the production of technical siliconBazarovAlexander A(Dr. Sci. (Techn.)), Professor-NavasardyanAshot AGraduate student-Samara State Technical University15032016241879510022020Copyright © 2016, Samara State Technical University2016A set of issues on modeling of electromagnetic and thermal processes in the induction heater for the formation of a magnetic field, compressing the melt and preventing the contact of silicon in the liquid phase with the walls of thermal insulation. In determining the inductor’s power and voltage frequency, the temperature-dependent nonlinear properties are taken into account. The design parameters which enable cooling to the solid state under induction heating conditions are searched for. To solve the problems of electromagnetic and thermal processes modeling used a finite-element formulation taking into account the nonlinearities and the fusion latent heat. Different realization variants of the inductor which enables covering the melt’s entire volume or its part in case of continuous movement after the silicon solidification are examined.induction heatingcrystallizationmagnetic vector potentialиндукционный нагревкристаллизациявекторный магнитный потенциал[Гецелев З.Н., Балахонцев Г.А., Квасов Ф.И. и др. Непрерывное литье в электромагнитный кристаллизатор. - М.: Металлургия, 1983. - 152 с.][Глазов В.М., Щеликов О.Д. Объемные изменения при плавлении и нагреве расплавов кремния и германия // Теплофизика высоких температур. - 2000. - Т. 38, № 3. - С. 429-436.][Магомедов Я.Б., Гаджиев Г.Г. Высокотемпературная теплопроводность кремния в твердом и жидком состояниях // Теплофизика высоких температур. - 2009. - Т. 46, № 3. - С. 466-467.][Соколовская Л.А., Мамишев В.А. О математическом моделировании задач с фазовыми переходами в металлургии и литейном производстве // Процессы литья. - 2009. - № 2. - С. 24-29.][Лыков А.В. Тепломассообмен. - М.: Энергия, 1971. - 560 с.][Базаров А.А., Данилушкин А.И., Осипов В.С. Система плавки гололеда на проводах линий электропередачи без отключения нагрузки // Вестник Самарского государственного технического университета. Сер. Технические науки. - 2015. - № 3. - С. 109-117.][Слухоцкий А.Е., Рыскин С.Е. Индукторы для индукционного нагрева. - Л.: Энергия, 1974. - 264 с.]