Vestnik of Samara State Technical University. Technical Sciences SeriesVestnik of Samara State Technical University. Technical Sciences Series1991-85422712-8938Samara State Technical University7922210.14498/tech.2021.2.10Research ArticleSynthesis of the finite controller for the servo drive with the synchronous motorStarikovAlexander V.<p>Dr. Sci. (Techn.), Professor, Head of the Department «Electric Drive and Industrial Automation»</p>vest_teh@samgtu.ruKirdyashevViktor A.<p>Postgraduate Student</p>vest_teh@samgtu.ruSamara State Technical University300820212921451572608202126082021Copyright © 2021, Samara State Technical University2021<p>The paper is devoted to the synthesis of a finite controller for a digital servo drive with a synchronous motor, as well as to the determination of the possibility and area of its application. A block diagram of the single-loop servo drive is considered, which contains a digital finite controller that ensures the completion of transient processes in a strictly defined number of clock cycles of the sampling period. The form of the discrete transfer function of the finite controller is proposed. The transfer function of the closed-loop electric drive with the proposed type of controller is found. The system of equations was compiled and solved, which makes it possible to determine the tuning parameters of the finite controller for the servo drive with the synchronous motor. The results of computer simulation are given, showing that the transient processes in the control and disturbing effects in the servo drive are completed in 6 clock cycles of the sampling period. A formula is obtained for calculating the output signal of a finite controller for digital technical implementation on a microcontroller. A computational model of the considered digital electric drive has been developed, taking into account the limitation of current and voltage in the power converter. At small sampling periods, a servo drive with the finite controller is shown to require current limitation at the level of 16 nominal values. At low limiting values, the drive becomes unstable. To ensure the operability of an electric drive with the finite controller, it is proposed to increase the sampling period. It is shown that, in this case the servo drive remains stable in the entire range of displacements even under current and voltage limitations at the level of nominal values. The simulation results made it possible to conclude that the developed electric drive has a high speed of response, since during the development of the control action, the entry into the zone of 1 discrete from the set value is 0.022 s. It is shown that the presence of a static positioning error, which increases with an increase in the sampling period, is a negative effect of the finite control application in the servo drive with the synchronous motor. The electric drive in question is proposed to be supplied with one more position loop with an integral controller, which allows to compensate for the static positioning error.</p>servo drivefinite controllerdiscrete transfer functionsynchronous motorследящий электроприводфинитный регулятордискретная передаточная функциясинхронный двигатель[Mustafa M.N. Research of self-controlled inverter-bed synchronous motors with static correction of characteristics for electric drives of low power: Dis. ... cand. tech. sciences / M.N. Mustafa. SPb.: SPbGETU "LETI", 2001. 201 p.][Dzhankhotov V.V. Research and development of servo electric drives based on of self-controlled inverter-bed synchronous motors with control from a signal processor for a walking robot: Dis. ... cand. tech. sciences / V.V. Dzhankhotov. SPb.: SPbGETU "LETI", 2004. 245 p.][Samokhvalov D.V. Correction of static characteristics of an electric drive with a low-power brushless motor and a microprocessor control device: Dis. ... cand. tech. sciences / D.V. Samokhvalov. SPb.: SPbGETU "LETI", 2010. 267 p.][Galitskov S.Ya., Galitskov K.S. Multi-circuit control systems with one measured coordinate: Monograph. Samara: SGASU, 2004. 140 p.][Lisin S.L. Structural and parametric synthesis of a high-speed servo electric drive with a synchronous executive motor: Dis. ... cand. tech. sciences / S.L. Lisin. Samara: SamSTU, 2016. 179 p.][Lisin S.L. Increasing the speed of a servo drive with a synchronous executive motor // Bulletin of the Samara State Technical University. Series "Engineering Sciences". 2012. No. 4 (36). Pp. 173–181.][Starikov A.V. New technical solutions in modern servo drives: Textbook on the discipline "Control systems for electric drives" / A.V. Starikov, S.L. Lisin, V.A. Aref’yev, D.N. Dzhabasov. Samara: Samara State Technical University, 2018. 93 p.][Patent of Russia 2499351. Servo drive / A.V. Starikov, S.L. Lisin (Russia). Publ. 11.20.2013, Bul. 32.][Patent of Russia 2605948. Servo drive / A.V. Starikov, S.L. Lisin (Russia). Publ. 01.10.2017, Bul. 1.][Patent of Russia 2695804. Servo drive with the synchronous motor / S.L. Lisin, A.V. Starikov (Russia). Publ. 07.29.2019, Bul. 22.][Starikov A.V. Increasing of the Response Speed of the Rotary Table Servo Drive / A.V. Starikov, S.L. Lisin, D.Yu. Rokalo // 2018 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon), IEEE Xplore, 2019. Pp. 1–5.][Starikov A.V. Technical Implementation of the High-Speed Response Servo Drive at the Programmable Logic Device / A.V. Starikov, S.L. Lisin, D.Yu. Rokalo // 2019 International Conference on Electrotechnical Complexes and Systems (ICOECS), IEEE Xplore, 2020. Pp. 1–6.][Tsypkin Ya.Z. Fundamentals of the theory of automatic systems. Moscow: Nauka, 1977. 560 p.][Lysov M.S. Discrete mathematical model of a digital control system for a rotary table // Bulletin of the Samara State Technical University. Series "Engineering Sciences". 2009. No. 1 (23). Pp. 160–166.][Lisin S.L., Starikov A.V. Discrete mathematical model of a digital servo electric drive with a synchronous executive motor // Bulletin of the Samara State Technical University. Series "Technical Sciences". 2013. No. 1 (37). Pp. 203–208.]