Issue |
Title |
File |
Vol 22, No 3 (2014) |
Development of thermal model spindle assembly machine tool |
(Rus)
|
Denisenko A.F., Nazarov N.S.
|
Vol 22, No 3 (2014) |
Modern technological methods and means for honing of openings in small rigidity parts |
(Rus)
|
Lysenko N.V., Shilova Y.A.
|
Vol 22, No 3 (2014) |
Investigation of the cam mechanism motion law with structural elements deformations |
(Rus)
|
Podgorny Y.I., Kirillov A.V., Maksimchuk O.V.
|
Vol 22, No 3 (2014) |
Positional electric drive system with programmatic correction |
(Rus)
|
Denisov V.A., Madyshev R.R., Borodin O.A.
|
Vol 22, No 3 (2014) |
Updating of the electric power transmission tariff calculation method due to use of the multiplying coefficients to reactive power consumption |
(Rus)
|
Kuznetsov A.V., Argentova I.V.
|
Vol 22, No 3 (2014) |
Temperature fields modeling of the radial electromagnetic bearing |
(Rus)
|
Makarichev Y.A., Ivannikov Y.N.
|
Vol 22, No 3 (2014) |
Viscous fluid mixing with a free surface in a tank with a Rushton turbine |
(Rus)
|
Gazizullin N.A.
|
Vol 22, No 3 (2014) |
The inverse problem solution of heat conduction for the initial conditions identification of the boundary value problem |
(Rus)
|
Kuznetsova A.E., Skvortsova M.P., Stefanyk E.V.
|
Vol 22, No 3 (2014) |
Method of high-viscosity oil field development with periodic lay heating |
(Rus)
|
Olkhovskaya V.A., Zinoviev A.M., Gubanov S.I.
|
Vol 22, No 3 (2014) |
Aerodynamic research of AGG-type burner flowing part |
(Rus)
|
Petchnikov A.S., Grigoryan L.G.
|
Vol 22, No 3 (2014) |
Process evaporation modeling of the hydrocarbonaceous wastes |
(Rus)
|
Shuplyak A.Y., Shkaruppa S.P.
|
Vol 22, No 3 (2014) |
Professor Gennadiy efremovich Zaikov - chelovek, uchenyy, grazhdanin (k 80-letiyu so dnya rozhdeniya) |
(Rus)
|
Opalko A.I., Pimerzin A.A.
|
Vol 22, No 2 (2014) |
Robust systems of automatic direction by dynamic objects with time relay and passive adaptation |
(Rus)
|
Vokryshev V.E.
|
Vol 22, No 2 (2014) |
Analysis of operation algorithm for automatic lines extrusion zone heating system |
(Rus)
|
Mikheev A.G.
|
Vol 22, No 2 (2014) |
Optimization of the technological equipment of industrial water supply systems |
(Rus)
|
Nechaev D.A., Orlov S.P.
|
Vol 22, No 2 (2014) |
On the error correction of measurings of blades tipsradial and axial displacements cause to irregular blade pitch on turbomachine wheel |
(Rus)
|
Borovik S.Y.
|
Vol 22, No 2 (2014) |
Revealing of bad data measurements based on a posteriori analysis |
(Rus)
|
Kochneva E.S., Pazderin A.V.
|
Vol 22, No 2 (2014) |
The methods and tools for measuring the integral characteristics that are invariant to errors in the formation of additional harmonic signals |
(Rus)
|
Melent'ev V.S., Ivanov Y.M., Muratova V.V.
|
Vol 22, No 2 (2014) |
The method for measuring a frequency based on the comparison of the instant values of input and additional harmonic signals |
(Rus)
|
Sinitsyn A.E., Lychev A.O., Yaroslavkina E.E.
|
Vol 22, No 2 (2014) |
Effect of the flow high speed the discrete corpuscles with the various in performances on metals |
(Rus)
|
Aleksentseva S.E., Krivchenko A.L.
|
Vol 22, No 2 (2014) |
Research mechanical and corrosion properties composite aluminum alloys Al-TiC |
(Rus)
|
Ermoshkin A.A., Ermoshkin A.A., Luts A.R.
|
Vol 22, No 2 (2014) |
About pitting of carbides from raceway of bearing's rings made of corrosion-resistant steel 110Cr18Mo |
(Rus)
|
Kazarin S.I.
|
Vol 22, No 2 (2014) |
Method of coating on the inner surface of the pipe |
(Rus)
|
Skvortsov B.V., Zaretskaya M.I.
|
Vol 22, No 2 (2014) |
Calculation of the amplitude of local conditional elastic stresses on the wall section tank with defects the form as a dent |
(Rus)
|
Bannikov R.Y., Smetannikov O.Y., Trufanov N.A.
|
Vol 22, No 2 (2014) |
Hydroblasting influence on polycyclic fatigue of cylindrical parts made of D16T alloy using reference specimen initial deformations evaluation |
(Rus)
|
Vakuljuk V.S., Sazanov V.P., Pavlov V.F., Shadrin V.K.
|
Vol 22, No 2 (2014) |
Methodology of determining of the preload of bearings spindle |
(Rus)
|
Gasparov E.S., Denisenko A.F., Gasparova L.B.
|
Vol 22, No 2 (2014) |
Probabilistic estimation of residual life of the pipelines with cracks |
(Rus)
|
Glushkov S.V.
|
Vol 22, No 2 (2014) |
Surface hardened threaded pipe parts made of high-strength aluminum alloy 1953T1 fatigue resistance |
(Rus)
|
Kirpichev V.A., Ivanova A.V., Filatov A.P., Afanasieva O.S., Mazurenko I.A.
|
Vol 22, No 2 (2014) |
Optimization of the phased introduction of automatic measuring systems |
(Rus)
|
Bodyagina A.A., Danilushkin I.A., Kolpaschikov S.A., Serenkov V.E.
|
Vol 22, No 2 (2014) |
IGNITION turbulent flow aerosuspension aluminum particles electrical sparks |
(Rus)
|
Egorov A.G., Tizilov A.S.
|
Vol 22, No 2 (2014) |
Research of Tol’jatti HS on computer models |
(Rus)
|
Kolesnikov S.V.
|
Vol 22, No 2 (2014) |
Two-dimensional problem of optimal with respect to typical quality criteria control of through induction heating processes |
(Rus)
|
Pleshivtseva Y.E., Popov A.V., Dyakonov A.I.
|
Vol 22, No 2 (2014) |
Solution of boundary value problem for mathematical model of operation of trunk pipelines for petroleum transportation by the method of Green functions |
(Rus)
|
Afinogentov A.A., Tychinina Y.A., Popov A.V.
|
Vol 22, No 2 (2014) |
Perfection of gas inlet unit construction for thermal stress decreasing |
(Rus)
|
Grigoryan L.G., Papirovsky V.L., Ignatenkov Y.I., Ivanyakov S.V., Konovalenko D.V.
|
Vol 22, No 2 (2014) |
High technology application detanatsionnyh cover forming an abrasive solids layer |
(Rus)
|
Gubareva Y.N.
|
Vol 22, No 2 (2014) |
To the question of imredance matchihg transformers with primary secondary circuits transform information-measuring and control systems |
(Rus)
|
Lyapidov V.S.
|
Vol 22, No 2 (2014) |
Determination of multi-fractal characteristics of the chromatographic signals |
(Rus)
|
Saifullin R.T.
|
Vol 22, No 2 (2014) |
Experimental determination of the temperature field of mechatronic module |
(Rus)
|
Khorenko M.V.
|
Vol 22, No 1 (2014) |
On the problem of control subsystems AIS enterprises chemical engineering |
(Rus)
|
Vlasov A.P.
|
Vol 22, No 1 (2014) |
Vulnerability analisis of industrial enterprise by making wares |
(Rus)
|
Vorojeikin V.N.
|
Vol 22, No 1 (2014) |
Performance analysis of dynamics research by generalized ranking II. Generalized ranking |
(Rus)
|
Livshits M.Y., Tsapenko M.Y., Davydov A.N., Barbolin D.A.
|
Vol 22, No 1 (2014) |
Use of the Bayesian method for statistical data processing of optoelectronic converter tests results |
(Rus)
|
Ahpolova E.A., Orlov S.P.
|
Vol 22, No 1 (2014) |
Experimental estimation of single-coil eddy-current sensor temperature measure error |
(Rus)
|
Borovik S.Y., Kuteynikova M.M., Raykov B.K., Sekisov Y.N., Skobelev O.P.
|
Vol 22, No 1 (2014) |
The improvement of the methods of measuring the integrated characteristics on instant values of orthogonal components of signals |
(Rus)
|
Ivanov Y.M.
|
Vol 22, No 1 (2014) |
The test method to improve the accuracy of measurement of density flowing densitometer |
(Rus)
|
Kuznetscov V.A.
|
Vol 22, No 1 (2014) |
Modeling of measuring circuits with parametric sensors for information and measuring systems |
(Rus)
|
Kulikovsky K.L., Chernetzov M.V.
|
Vol 22, No 1 (2014) |
The synthesis of measurement methods of bipolar electrical circuits parameters on the instant values of transients |
(Rus)
|
Melent’ev V.S., Kostenko E.V., Evstifeeva T.S., Levina K.D.
|
Vol 22, No 1 (2014) |
Improvement of properties of digital differentiating devices with the small sampling times |
(Rus)
|
Starikov A.V., Belyaeva I.S., Jabasova D.N.
|
Vol 22, No 1 (2014) |
Providing high-quality application of ion-plasma coatings on wrought aluminum alloys |
(Rus)
|
Muratov V.S., Guravel L.V., Trefilova N.V.
|
Vol 22, No 1 (2014) |
Fracture analysis of internal anti-corrosive coatings of oil pipeline and oil-well tubing |
(Rus)
|
Yudin P.E.
|
Vol 22, No 1 (2014) |
Surface hardened specimens with cuts endurance limit dependence on cross-section sizes |
(Rus)
|
Pavlov V.F., Kirpichev V.A., Filatov A.P., Sazanov V.V., Yarionova Y.S.
|
Vol 22, No 1 (2014) |
Dynamical model of the horizontal scheme of automatic assembly of cylindrical details |
(Rus)
|
Chernyahovskaya L.B.
|
Vol 22, No 1 (2014) |
Analysis of the impfct of the dynamics of the punch velocity loop units movement on the gualite of the automatic system of deep drawing process |
(Rus)
|
Kaplun E.S., Lysov V.E.
|
Vol 22, No 1 (2014) |
Optimum control of heatmass transfer process in the conditions of decomposition of basic model |
(Rus)
|
Bengina T.A.
|
Vol 22, No 1 (2014) |
Using computational model for investigation of combined action of pumps with the controlled and noncontrolled drive |
(Rus)
|
Kolesnikov S.V., Kudinov V.A., Kuznetsova A.E., Branfileva A.V., Skvortsova M.P.
|
Vol 22, No 1 (2014) |
Accuracy approximation of unsteady heat conduction plate with boundary conditions of the third kind |
(Rus)
|
Kotenev V.I., Kotenev A.V., Tatarnikov A.N.
|
Vol 22, No 1 (2014) |
Thermoelasticity in multilayer structureswith variable physical properties of the medium |
(Rus)
|
Kuznetsova A.E.
|
Vol 22, No 1 (2014) |
Features of aircraft engine converting into gas turbine drive blower for gas-main pipelines |
(Rus)
|
Orlov M.Y., Gulina S.A., Orlova G.M.
|
Vol 22, No 1 (2014) |
Stages of formation and production of mineral oils in Russia |
(Rus)
|
Zhilkina E.O., Antonov S.A.
|
Vol 22, No 1 (2014) |
Waterflooding process modeling in dual-periodical area using by pistonlike oil displacement pattern |
(Rus)
|
Kasatkin A.Y.
|
Vol 22, No 1 (2014) |
Study of bottom sediments in the oil storage tanks |
(Rus)
|
Pilschikov V.A., Yeremina Y.V., Tsvetkov V.S., Pimerzin A.A., Shvetsov O.V., Belov O.A.
|
Vol 22, No 1 (2014) |
On the determination of a joint density function for one class of discrete stochastic processes |
(Rus)
|
Volkov I.I., Fedorov S.V.
|
Vol 22, No 1 (2014) |
Automatic control system of lock gate movement |
(Rus)
|
Danilushkin I.A., Kolpaschikov S.A., Melnikov E.V.
|
Vol 22, No 1 (2014) |
Dynamic characteristic of direct-current drive moment stabilizing |
(Rus)
|
Kurgan V.P., Pankin A.A.
|
Vol 22, No 1 (2014) |
Stabilization mode of the continuous casting regime for aluminum alloys flat bars based on approximate regression models |
(Rus)
|
Yakubovich E.A.
|
Vol 22, No 1 (2014) |
XXII Enikolopovskie chteniya, posvyashchennye 90-letiyu so dnya rozhdeniya akademika N.S. Enikolopova Polimernye i kompozitsionnye materialy dlya primeneniya v biologii i meditsine |
(Rus)
|
Zaikov G.E., Zimina L.A.
|
Vol 21, No 4 (2013) |
Risk analysis method for ensuring the safety of industrial enterprises |
(Rus)
|
Bukanov F.F., Vorozheikin V.N.
|
Vol 21, No 4 (2013) |
Uniqueness estimation technique of the electronic map's fragments based on the fuzzy logic |
(Rus)
|
Demidova L.A., Myatov G.N.
|
Vol 21, No 4 (2013) |
Performance analysis of dynamics research by generalized ranking (Part 1 - Forecast) |
(Rus)
|
Livshits M.Y., Tsapenko M.V., Davydov A.N., Barbolin D.A.
|
Vol 21, No 4 (2013) |
Multiparameter control of communication cables production based on predictive models |
(Rus)
|
Mitroshin V.N.
|
Vol 21, No 4 (2013) |
The optimal control system of collective investments under Markowitz's model |
(Rus)
|
Sarkisov V.G.
|
Vol 21, No 4 (2013) |
Structural and parametric synthesis of unstable object control systems |
(Rus)
|
Starikov A.V., Lisin S.L.
|
Vol 21, No 4 (2013) |
Optimization of multiconnection control by means of the simplex method |
(Rus)
|
Chostkovsky B.K., Denisov V.U., D'yakonov A.I.
|
Vol 21, No 4 (2013) |
The analysis of influence of the quantization error on result of measurement of harmonious signals integrated characteristics |
(Rus)
|
Ivanov Y.M.
|
Vol 21, No 4 (2013) |
Synthesis and research of pvd-coatings obtained using multicomponent SHS-pressed cathode based system Ti-B-Si |
(Rus)
|
Altukhov S.I., Asmolov A.N., Bogdanovich V.I., Ermoshkin A.A., Latukhin E.I.
|
Vol 21, No 4 (2013) |
Analysis of the ways to improve the plating quality |
(Rus)
|
Kretov S.S.
|
Vol 21, No 4 (2013) |
Continuum model of elastic properties of isotropic porous materials with empirical functions of porosity |
(Rus)
|
Fedotov A.F.
|
Vol 21, No 4 (2013) |
Applicability evaluation of the method of direct and inverse impact for determining the properties of internal anti-corrosion coatings pipelines |
(Rus)
|
Yudin P.E., Akulinin A.A.
|
Vol 21, No 4 (2013) |
Model of the support of the spindle on bearings rolling |
(Rus)
|
Gasparov E.S., Denisenko A.F., Gasparova L.B.
|
Vol 21, No 4 (2013) |
Aviation method of landing of woods and others types of plants with application pyrotechnic holders |
(Rus)
|
Zacharov I.V., Aleksentseva S.E.
|
Vol 21, No 4 (2013) |
Oscillations in the railway car truck |
(Rus)
|
Romen Y.S., Klebanov I.M., Soldusova E.A.
|
Vol 21, No 4 (2013) |
Residual stress and elastic deformation fields evaluation for heated cylindrical specimen |
(Rus)
|
Smyslov V.A.
|
Vol 21, No 4 (2013) |
The simulation of the finite-element method of bearing collar heating during race grinding |
(Rus)
|
Fokin V.G., Dmitriev V.A.
|
Vol 21, No 4 (2013) |
Mathematical analysis of automated process of the cylindrical details assemble |
(Rus)
|
Chernyahovskaya L.B.
|
Vol 21, No 4 (2013) |
Combined operating conditions optimization of variable-frequency and fixed electric drives for reservoir-pressure maintenance system pumps |
(Rus)
|
Abakumov A.M., Mukhortov I.S., Bilalov F.F.
|
Vol 21, No 4 (2013) |
Performance analysis of properties of powertransformers with a core of amorphous materials and protection them using surge arresters |
(Rus)
|
Goldstein V.G., Inahodova L.M., Kazantzev A.A., Molochnikov E.A.
|
Vol 21, No 4 (2013) |
Investigation of temperature and thermal stress state of boiler drums heat power plants |
(Rus)
|
Kolesnikov S.V., Kuznetsova A.E., Stefanuk E.V., Branfileva A.N., Abisheva L.S.
|
Vol 21, No 4 (2013) |
Comparison of mass and thermal properties of convective heat exchange surfaces |
(Rus)
|
Schelokov A.I., Krasnova N.P.
|
Vol 21, No 4 (2013) |
Structural-parametric synthesis of multiloop automatic control system of initial oil refining technological process |
(Rus)
|
Afinogentov A.A., Pleshivtseva Y.E., Setin S.P., Snopkov A.S.
|
Vol 21, No 4 (2013) |
Research of gas running through burner type AGG |
(Rus)
|
Petchnikov A.S., Grigoryan L.G.
|
Vol 21, No 4 (2013) |
the design of high-safety instant-action electric blasting cap for the shotfiring in petroleum industry. The improvement of efficiency and safety of the construction |
(Rus)
|
Postnov S.I., Kozhevnikov E.A., Gidaspov A.A., Rekshinskiy V.A.
|
Vol 21, No 4 (2013) |
On maximum likelihood estimation of characteristics of stationary stochastic process with exponential correlation function |
(Rus)
|
Volkov I.I., Fedorov S.V.
|
Vol 21, No 4 (2013) |
Numerical-analytical model of a distributed parameter plant with variable structure |
(Rus)
|
Danilushkin I.A.
|
Vol 21, No 4 (2013) |
Initiation of detonation by collisional waves in fill-up and water-filled industrial cyclonite |
(Rus)
|
Krivchenko A.L., Klyuster I.A.
|
Vol 21, No 4 (2013) |
The method and system of measurement of integrated characteristics with use of orthogonal making signals |
(Rus)
|
Melent'ev V.S., Muratova V.V., Jaroslavkina E.E.
|
Vol 21, No 4 (2013) |
Building systems of autonomous robots, with ability to memorize and restore their structures in the space |
(Rus)
|
Patkin M.L., Yudashkin A.A.
|
Vol 21, No 4 (2013) |
Synthesis production rule system of digital controllers |
(Rus)
|
Rogachev G.N.
|
Vol 21, No 4 (2013) |
Comprehensive study of solidified paraffin oil shear process in a pipeline |
(Rus)
|
Tian V.K., Pimenov A.V.
|
Vol 21, No 4 (2013) |
Approximate regression-type models for analysis of aluminium alloys continuos ingots solidification |
(Rus)
|
Yakubovich E.A.
|
Vol 21, No 3 (2013) |
The development of intellectual network-centric system (smart grid) of adaptive resource allocation in integrated networks of gas, heat and electricity |
(Rus)
|
Budaev D.S., Larukhin V.B., Kosov D.S., Simonova E.V.
|
401 - 500 of 936 Items |
<< < 1 2 3 4 5 6 7 8 9 10 > >>
|