Issue |
Title |
File |
Vol 19, No 2 (2011) |
Usage of ultrasonic vibrations of low amplitude for forming the forging compounds followed by analysis of resistance characteristics |
(Rus)
|
Ankoudinov D.V., Batishcheva O.M., Papshev V.A., Shuvaev V.G.
|
Vol 19, No 2 (2011) |
Research of the resource of supports cone bits |
(Rus)
|
Bogomolov R.M., Remnev V.V., Nosov N.V., Dedov N.I.
|
Vol 19, No 2 (2011) |
Design of machine unit actuator with isotropic coordinate priability |
(Rus)
|
Denisenko A.F.
|
Vol 19, No 2 (2011) |
Investigation of the relationship between acoustic emission and destruction stonecasting material under uniaxial compression |
(Rus)
|
Ignatov M.N., Ignatova A.M., Artemov A.O., Asanov V.A.
|
Vol 19, No 2 (2011) |
Assessing the impact of assumptions on the results of the simulation of transients in lightning strikes in the transmission line |
(Rus)
|
Gumerova N.I., Chalilov F.C., Hohlov G.G., Kosorlukov I.А.
|
Vol 19, No 2 (2011) |
Three-phase supplied industrial frequency magnetic fields calculation method |
(Rus)
|
Saltykov V.M., Bezmenova N.V.
|
Vol 19, No 2 (2011) |
Simulation of automated machining systems |
(Rus)
|
Chekanina E.A.
|
Vol 19, No 2 (2011) |
Dependences of the torque, frequency of rotation and efficiency of induction clutch with three degrees of freedom from active length of an armature |
(Rus)
|
Haritonov D.V.
|
Vol 19, No 2 (2011) |
Modeling of haydite swelling in rotating furnace as an control object |
(Rus)
|
Galickov S.Y., Danilushkin А.I., Fadeev А.S.
|
Vol 19, No 2 (2011) |
A model of spatially distributed heat transfer between pipe and flow based on modal representation |
(Rus)
|
Danilushkin I.А., Timofeeva O.N.
|
Vol 19, No 2 (2011) |
The boundary inverse heat conduction problems based on parametric optimization |
(Rus)
|
Diligenskaya A.N.
|
Vol 19, No 2 (2011) |
Obtaining analytical solving of thermal conductivity problems with variable properties of physical environment |
(Rus)
|
Kudinov V.A., Largina E.V.
|
Vol 19, No 2 (2011) |
Optimum on accuracy management of process of chemical neutralization |
(Rus)
|
Mandra A.G., Rapoport E.Y.
|
Vol 19, No 2 (2011) |
Problems occurring while using transonic devices |
(Rus)
|
Novopashina N.A., Titov G.I.
|
Vol 19, No 2 (2011) |
Comparative analysis of communal objects heat supply efficiency |
(Rus)
|
Shchelokov A.I., Filatova E.B.
|
Vol 19, No 2 (2011) |
Modeling of vapor condensation processes using stochastic cellular automaton method |
(Rus)
|
Konygin S.B.
|
Vol 19, No 2 (2011) |
High resolution serismics copabilities |
(Rus)
|
Malykhin M.D.
|
Vol 19, No 2 (2011) |
Mathematical description of oil separation process under acoustic influence |
(Rus)
|
Pishchukhin A.M., Tugov V.V., Fakhritdinov T.B.
|
Vol 19, No 2 (2011) |
Method of calculating the temperature separation of oil based on the properties of narrow fractions |
(Rus)
|
Sizikov A.P.
|
Vol 19, No 2 (2011) |
Theoretical foundations of existence and uniqueness of best approximation by spline-approximation |
(Rus)
|
Bryatov A.S., Myakishev V.M., Protsenko A.N.
|
Vol 19, No 2 (2011) |
Experimental research method of motion video detectors |
(Rus)
|
Bukanov F.F., Valiev A.R., Valiev A.R.
|
Vol 19, No 2 (2011) |
Process operate trainer's learning subsystem |
(Rus)
|
Kolpashchikov S.A., Minvaleev R.R.
|
Vol 19, No 2 (2011) |
The transitional processes of position direct current electric drive with minimal heat loss |
(Rus)
|
Kurgan V.Р., Pankin A.A.
|
Vol 19, No 2 (2011) |
Structure and strength of welds of sheet products out of aluminum alloy 1545K |
(Rus)
|
Muratov V.S., Yudaev D.P.
|
Vol 19, No 2 (2011) |
The results of calculations of lightning protection of 35-220 kV, supplying enterprises of oil and gas, with the help of traditional methods |
(Rus)
|
Popova J.S., Serebrennikov D.S.
|
Vol 19, No 2 (2011) |
Application of the static compensators STATCOM forhousehold customers |
(Rus)
|
Shchetinin V.G.
|
Vol 19, No 1 (2011) |
Identification of modified object of Gammershtein |
(Rus)
|
Galiullin R.S.
|
Vol 19, No 1 (2011) |
Definition of model of object with the distributed parameters in the software package of computer modelling of lumped dynamic systems |
(Rus)
|
Guseva M.A.
|
Vol 19, No 1 (2011) |
Features of construction of genetic operators of the mutation and crossover by search vector of functions by means of genetic programming |
(Rus)
|
Egorov V.A., Rogachev G.N.
|
Vol 19, No 1 (2011) |
Algorithm for constructing the graph adjacency matrix of the obstacles surface to finding the shortest path the movement of truck crane cargo |
(Rus)
|
Korytov M.S.
|
Vol 19, No 1 (2011) |
Construction of formal model of an active element of the multi-agent decision support system. |
(Rus)
|
Kukikovskiy K.L., Gaisin V.F.
|
Vol 19, No 1 (2011) |
Сontrol of melt polymer pressure in the batching zone of the single-screw extruder with pulsating pressure gradient |
(Rus)
|
Mitroshin V.N.
|
Vol 19, No 1 (2011) |
Automatic acquisition of knowledge about taxonomies from free language text |
(Rus)
|
Moshkov I.S.
|
Vol 19, No 1 (2011) |
Сontrol system optimality indicators choice method, focused on consumer's preferences |
(Rus)
|
Sarkisov V.G.
|
Vol 19, No 1 (2011) |
Researching dynamic influence on the objects sea transportation during pitching |
(Rus)
|
Shirokov S.V.
|
Vol 19, No 1 (2011) |
Productional models of data and knowledge formalizing in IT-systems of geological recon projects analysis |
(Rus)
|
Batishchev V.I., Gubanov N.G., Tishkovskaya U.V.
|
Vol 19, No 1 (2011) |
Мethod of assessment implantation dynamics component «litar» by analyzing x-rays through a system impulse function |
(Rus)
|
Bekasov L.S.
|
Vol 19, No 1 (2011) |
Optoelektronic converter of the linear displacement |
(Rus)
|
Korganova O.G., Kuzneco V.A.
|
Vol 19, No 1 (2011) |
Multifunctional distance labs for real experiments |
(Rus)
|
Krylov S.M., Tolchev V.N.
|
Vol 19, No 1 (2011) |
Self-adaptive algorithm of high-precision superposition of the affine-transformed image |
(Rus)
|
Kuznesov P.K., Chekotilo E.Y., Martemyanov B.V.
|
Vol 19, No 1 (2011) |
Regional information systems functioning performance characteristics evaluation based on information and communication service-market simulation |
(Rus)
|
Masloboev A.V., Datyev I.O.
|
Vol 19, No 1 (2011) |
Тhe method of measurement of parameters of three-element bipolar electric chains |
(Rus)
|
Melentyev V.S., Kostenko E.V.
|
Vol 19, No 1 (2011) |
Оptimization of structural parameters of multielectrode electro-capacity transformers of vlagomerov of oil |
(Rus)
|
Steblev U.I., Nefedova E.S.
|
Vol 19, No 1 (2011) |
Search domain names in corporate networks using lattice models |
(Rus)
|
Khramtcev A.S.
|
Vol 19, No 1 (2011) |
Spectral power density estimation with parametrical statistic smoothing using of differen linear model of time series random process |
(Rus)
|
Yakimov V.N., Philimonov A.B.
|
Vol 19, No 1 (2011) |
Оn some mathematical models of mechanical system "pipeline - pressure sensor" |
(Rus)
|
Velmisov P.A., Pokladova Y.V.
|
Vol 19, No 1 (2011) |
Fast annealing forgings of high speed steel |
(Rus)
|
Zholdoshov B.M., Muratov V.S., Kenis M.S.
|
Vol 19, No 1 (2011) |
Automatic control in gas temperature on the output of air cooling units |
(Rus)
|
Abakumov A.M., Alimov S.V., Migacheva L.A., Mosin V.N.
|
Vol 19, No 1 (2011) |
Structural modeling of process of methodical induction heating |
(Rus)
|
Danilushkin A.I., Kozhemyakin A.V., Mostovoy A.P.
|
Vol 19, No 1 (2011) |
Frequency current inductor in plastics molding |
(Rus)
|
Zimin L.S., Sorokin A.G.
|
Vol 19, No 1 (2011) |
Method of evaluation parameters attainable highly sensitive measuring oscillators converter negative capacitance |
(Rus)
|
Lyapidov V.S.
|
Vol 19, No 1 (2011) |
Analysis of dynamic process of re-excitation of the welding arc |
(Rus)
|
Myakishev V.M., Shishkov E.M.
|
Vol 19, No 1 (2011) |
Increasing of dynamic accuracy of positioning servo electric motor drive including nonlinearity type backlash in kinematic chain |
(Rus)
|
Sarantsev S.S., Lysov V.E.
|
Vol 19, No 1 (2011) |
To compilation equivalent circuits multiwinding transformers and determination of their parameters according registration emergency and working conditions |
(Rus)
|
Smirnov I.N., Alyunov A.N., Babarushkin V.A.
|
Vol 19, No 1 (2011) |
Parametric synthesis of regulators of multicircuit control system by magnetic rotor suspension |
(Rus)
|
Starikov A.V., Starikov S.A.
|
Vol 19, No 1 (2011) |
About industrial carbon dioxide emission influence on climate changers |
(Rus)
|
Geraschenko I.O., Lapidus A.L.
|
Vol 19, No 1 (2011) |
Analysis of an analytical model of a temperature field of gas turbine engine's disc |
(Rus)
|
Danilushkin I.A., Moskovtsev A.A.
|
Vol 19, No 1 (2011) |
Сonstruction of computer models of systems of the heat supply of cities |
(Rus)
|
Kudinov I.V.
|
Vol 19, No 1 (2011) |
Synthesis of optimal control algorithms for process of induction heating of massive body |
(Rus)
|
Lapitskaya M.H.
|
Vol 19, No 1 (2011) |
Enthalpy content diagram for steam-and-smoke mixtures |
(Rus)
|
Nikitin M.N., Shchelokov A.I.
|
Vol 19, No 1 (2011) |
Determination of water content and metalcontaining microelements in petroleum in the flow of the pipeline |
(Rus)
|
Susarev S.V., Astapov V.N.
|
Vol 19, No 1 (2011) |
Modelling of two-dimensional phase transition in adsorbed layers |
(Rus)
|
Konygin S.B.
|
Vol 18, No 7 (2010) |
ISSLEDOVANIE APPROKSIMATsIONNYKh ALGORITMOV REShENIYa OBRATNYKh ZADACh TEKhNIChESKOY DIAGNOSTIKI |
(Rus)
|
Batishchev V.I., Volkov I.I., Zolin A.G.
|
Vol 18, No 7 (2010) |
Matematicheskoe modelirovanie i analiz protsessov upravleniya proizvodstvennymi sistemami |
(Rus)
|
Diligenskaya A.N.
|
Vol 18, No 7 (2010) |
MATEMATIKA, ALGORITMY, TEZIS T'YuRINGA-ChERChA I METAFIZIKA ARISTOTELYa |
(Rus)
|
Krylov S.M.
|
Vol 18, No 7 (2010) |
ISPOL'ZOVANIE SISTEMNOGO PODKhODA PRI AVTOMATIZATsII NEPRERYVNYKh TEKhNOLOGIChESKIKh PROTsESSOV KABEL'NOGO PROIZVODSTVA |
(Rus)
|
Mitroshin V.N., Mitroshin Y.V.
|
Vol 18, No 7 (2010) |
Chislenno-analiticheskaya protsedura optimal'nogo sinteza gibridnykh sistem |
(Rus)
|
Rogachev G.N., Egorov V.A.
|
Vol 18, No 7 (2010) |
OPTIMIZATsIYa NEFTEPERERABATYVAYuShchEGO PROIZVODSTVA KAK SLOZhNOY SISTEMY |
(Rus)
|
Sizikov A.P.
|
Vol 18, No 7 (2010) |
Reshenie zadach distantsionnogo zondirovaniya zemlis primeneniem mul'tiagentnykh tekhnologiy |
(Rus)
|
Skobelev P.O., Sollogub A.V., Ivashchenko A.V., Simonova E.V., Stepanov M.E., Tsarev A.V.
|
Vol 18, No 7 (2010) |
Sintez elementov poverochnykh sistem dozirovaniya komponentov topliva |
(Rus)
|
Gudkov K.V., Mikheev M.Y., Yurmanov V.A.
|
Vol 18, No 7 (2010) |
Sravnitel'nyy analiz metodov izmereniya srednekvadraticheskikh znacheniy po otdel'nym mgnovennym znacheniyam signalov |
(Rus)
|
Karpova N.E.
|
Vol 18, No 7 (2010) |
ALGORITMIChESKIE METODY POVYShENIYa TOChNOSTI IZMERENIY NA OSNOVE OBRATNYKh INTERPOLYaTsIONNYKh MODELEY |
(Rus)
|
Kuper V.Y., Rubtsov M.G.
|
Vol 18, No 7 (2010) |
ISSLEDOVANIE PROTsESSOV PLAZMOOBRAZOVANIYa I VZAIMODEYSTVIYa PLAZMENNYKh POTOKOV S PREGRADAMI I MEZhDU SOBOY |
(Rus)
|
Isaev D.V., Krivchenko A.L., Reut I.I.
|
Vol 18, No 7 (2010) |
RAZRABOTKA TEKhNOLOGII MONTAZhA I DEMONTAZhA SUKhAREY KLAPANOV DVIGATELYa VNUTRENNEGO SGORANIYa V MAGNITOSTATIChESKOM POLE RABOChEGO ORGANA RASSUKhARIVATELYa |
(Rus)
|
Gorbunkov D.A., Kovshov A.G., Nosov N.V.
|
Vol 18, No 7 (2010) |
OBOSNOVANIE DINAMIChESKI OPTIMAL'NOGO REZhIMA RABOTY OSNOVNOGO MEKhANIZMA DVIGATELYa VNUTRENNEGO SGORANIYa |
(Rus)
|
Kosenok B.B.
|
Vol 18, No 7 (2010) |
VYSOKOTEMPERATURNAYa TERMOMEKhANIChESKAYa OBRABOTKA NIZKOLEGIROVANNYKh DISPERSIONNO-TVERDEYuShchIKh SPLAVOV NA MEDNOY OSNOVE |
(Rus)
|
Mikheev V.A., Khaymovich A.I.
|
Vol 18, No 7 (2010) |
Ostatochnye napryazheniya i predel vynoslivosti korsetnykh obraztsov posle razlichnykh vidov termicheskoy i khimiko-termicheskoy obrabotki |
(Rus)
|
Pavlov V.F., Vakulyuk V.S., Kirpichev V.A., Lapin V.I.
|
Vol 18, No 7 (2010) |
ISSLEDOVANIE IZMENENIYa MAKROSTRUKTURY METALLA UPROChNENNYKh TsILINDRIChESKIKh OBRAZTsOV IZ SPLAVOV V95 I D16T VSLEDSTVIE TEMPERATURNYKh VYDERZhEKI MNOGOTsIKLOVYKh USTALOSTNYKh ISPYTANIY |
(Rus)
|
Radchenko V.P., Morozov A.P.
|
Vol 18, No 7 (2010) |
ANALITIChESKOE I EKSPERIMENTAL'NOE ISSLEDOVANIE STATsIONARNYKh REZhIMOV RABOTY USTANOVOK OKhLAZhDENIYa GAZA KOMPRESSORNYKh STANTsIY MAGISTRAL'NYKh GAZOPROVODOV |
(Rus)
|
Abakumov A.M., Alimov S.V., Migacheva L.A.
|
Vol 18, No 7 (2010) |
Reshenie zadach avtomatizatsii obrabotki i analiza tekhniko-ekonomicheskikh pokazateley raboty oborudovaniya elektrostantsiy |
(Rus)
|
Bodyagina A.A.
|
Vol 18, No 7 (2010) |
Povyshenie tochnosti prognoza GRAFIKOV ELEKTRIChESKOY NAGRUZKI sistem elektrosnabzheniya krupnykh megapolisov na osnove spektral'nogo analiza |
(Rus)
|
Krotkov E.A., Alekseev A.Y.
|
Vol 18, No 7 (2010) |
Mikroprotsessornaya sistema, modeliruyushchaya nagruzku v reguliruemom elektroprivode |
(Rus)
|
Peshev Y.I., Chabanov Y.A.
|
Vol 18, No 7 (2010) |
MATEMATIChESKOE MODELIROVANIE UPRAVLYaEMYKh GIDRODINAMIChESKIKh PROTsESSOV TRUBOPROVODNOGO TRANSPORTA ZhIDKIKh UGLEVODORODOV |
(Rus)
|
Afinogentov A.A., Pleshivtseva Y.E., Snopkov A.S.
|
Vol 18, No 7 (2010) |
SNIZhENIE VYBROSOV OKSIDOV AZOTA V KOTLAKh MALOY MOShchNOSTI |
(Rus)
|
Gorshenin A.S., Shchelokov A.I.
|
Vol 18, No 7 (2010) |
PRIMENENIE PROSTRANSTVENNOY APPROKSIMATsII RASPREDELENNYKh SIGNALOV PRI MODELIROVANII TEPLOOBMENNYKh APPARATOV |
(Rus)
|
Guseva M.A., Danilushkin I.A.
|
Vol 18, No 7 (2010) |
RAZRABOTKA TsELEVOY FUNKTsII GAZOKOMPRESSORNOY STANTsII |
(Rus)
|
Kulikovskiy K.L., Savelov S.M.
|
Vol 18, No 7 (2010) |
STRUKTURNOE MODELIROVANIE UPRAVLYaEMYKh PROTsESSOV DIFFUZII V USLOVIYaKh KhIMIChESKOY REAKTsII MEZhDU VZAIMODEYSTVUYuShchIMI KOMPONENTAMI |
(Rus)
|
Mandra A.G., Rapoport E.Y.
|
Vol 18, No 7 (2010) |
SISTEMNYY ANALIZ REGULIROVANIYa TEPLOVOY NAGRUZKII POVYShENIE EFFEKTIVNOSTI TEPLOSNABZhENIYa MIKRORAYONA g. SAMARY |
(Rus)
|
Nemchenko V.I., Zheltukhin A.A.
|
Vol 18, No 7 (2010) |
ChISLENNOE MODELIROVANIE PROTsESSA PERIODIChESKOGO INDUKTsIONNOGO NAGREVA NA BAZE KONEChNO-ELEMENTNOGO PROGRAMMNOGO PAKETA FLUX |
(Rus)
|
Sharapova O.Y.
|
Vol 18, No 7 (2010) |
PRIMENENIE VODNYKh RASTVOROV LIGNOSUL'FONATOV V PROTsESSAKh POVYShENIYa NEFTEOTDAChI PLASTOV |
(Rus)
|
Kalinin E.S., Pavlov P.V., Kir'yanova E.V., Sherstnikova Y.E., Volkov V.A., Dorovskikh I.V.
|
Vol 18, No 7 (2010) |
PROFILI SKOROSTEY POTOKOV PRI STATsIONARNOM DVIZhENII SRED V TRUBAKh |
(Rus)
|
Krylov A.O.
|
Vol 18, No 7 (2010) |
Identifikatsiya tovarnykh benzinov universal'nym kompleksnym metodom |
(Rus)
|
Susarev S.V., Steblev Y.I., Astapov V.N.
|
Vol 18, No 7 (2010) |
MODEL' OTsENKI TEKhNIChESKOGO SOSTOYaNI Ya ELEKTRIChESKIKh MAShIN I APPARATOV |
(Rus)
|
Andreev D.A., Nazarychev I.A., Kosorlukov I.A.
|
Vol 18, No 7 (2010) |
modelirovanie protsessA upravleniya personalom predpriyatiya |
(Rus)
|
Buzuev A.I.
|
Vol 18, No 7 (2010) |
MODELIROVANIE RABOTY ZAVISIMOGO INVERTORA NAPRYaZhENIYa S UPRAVLENIEM PO FAZE TOKA |
(Rus)
|
Gulyaev I.V., Yushkov I.S., Kubar'kov Y.P.
|
Vol 18, No 7 (2010) |
Poperechnyy kraevoy effekt pri induktsionnom nagreve |
(Rus)
|
Zimin L.S., Shchelochkova A.M.
|
Vol 18, No 7 (2010) |
Obobshchennaya struktura komp'yuternogo trenazhera operatora tekhnologicheskogo protsessa |
(Rus)
|
Kolpashchikov S.A.
|
Vol 18, No 7 (2010) |
ISPOL'ZOVANIE KOMPARIROVANIYa MGNOVENNYKhZNAChENIY PERIODIChESKIKh SIGNALOV DLYa OPREDELENIYaIKh INTEGRAL'NYKh KhARAKTERISTIK |
(Rus)
|
Melent'ev V.S., Kozhevnikova E.G.
|
Vol 18, No 7 (2010) |
Modeli temperaturnykh poley v metallicheskoy zagotovke pri mekhanicheskoy obrabotke |
(Rus)
|
Uzenger A.A., Uzenger A.A.
|
Vol 18, No 7 (2010) |
RAZRABOTKA ZADATChIKA INTENSIVNOSTI SISTEMY AVTOMATIChESKOGO UPRAVLENIYa TEMPERATUROY PRODUKTA V APPARATE VOZDUShNOGO OKhLAZhDENIYa |
(Rus)
|
Shapovalo A.A.
|
801 - 900 of 936 Items |
<< < 1 2 3 4 5 6 7 8 9 10 > >>
|