Issue |
Title |
File |
Vol 19, No 3 (2011) |
Synthesis of stabilization system of polymer melt pressure in the single-screw extruder dosing zone |
(Rus)
|
Mitroshin V.N.
|
Vol 29, No 2 (2021) |
Synthesis of the finite controller for the servo drive with the synchronous motor |
(Rus)
|
Starikov A.V., Kirdyashev V.A.
|
Vol 20, No 3 (2012) |
Synthesis of the finite regulator for the control system by the electromagnetic bearing |
(Rus)
|
Starikov A.V.
|
Vol 19, No 3 (2011) |
Synthesis of the open-loop regulator for Dubins' car by anytime genetic algorithm |
(Rus)
|
Rogachev G.N.
|
Vol 26, No 3 (2018) |
Synthesis of the reverse filter on the criterion of minimum quadratic error of the weight function mismatch of the path «direct - reverse filter» |
(Rus)
|
Batishchev V.I., Volkov I.I., Zolin A.G.
|
Vol 17, No 3 (2009) |
Synthesis of the structure of indoors heating system in conditions of incompleteness of measurements |
(Rus)
|
Diligenskaya A.N., Shchetinin V.G.
|
Vol 20, No 4 (2012) |
Synthesis of time-optimal control system of the induction heating processes with interval of uncertainty characteristics of the object |
(Rus)
|
Levin I.S., Rapoport E.Y.
|
Vol 22, No 4 (2014) |
Synthesis of time-optimal control system of the State-Constrained induction heating processes with interval of uncertainty characteristics of the object |
(Rus)
|
Levin I.S., Rapoport E.Y.
|
Vol 21, No 4 (2013) |
Synthesis production rule system of digital controllers |
(Rus)
|
Rogachev G.N.
|
Vol 26, No 4 (2018) |
System analysis and modeling of environmental efficiency of regional power grid: the case of Samara region |
(Rus)
|
Ivanova D.V.
|
Vol 21, No 1 (2013) |
System analysis of application of the Tobin's separation theorem to Russian financial market |
(Rus)
|
Sarkisov V.G.
|
Vol 27, No 2 (2019) |
System analysis of reliability of district heat supply in Samara |
(Rus)
|
Salov A.G., Sagitova L.A.
|
Vol 17, No 3 (2009) |
System analysis of surface layer quality at production methods projecting depending on the service life |
(Rus)
|
Kulakov G.A., Usolzeva I.I.
|
Vol 24, No 1 (2016) |
System estimation of innovative activity of regional economy |
(Rus)
|
Tcapenko M.V.
|
Vol 21, No 2 (2013) |
System for gas emission measuring of the construction materials that used in spacecrafts |
(Rus)
|
Lange P.K., Kolcheva N.A.
|
Vol 29, No 4 (2021) |
System for maintaining effective axial load on the bit when drilling wells |
(Rus)
|
Mikheev S.A.
|
Vol 20, No 2 (2012) |
System for measuring grain size of metal alloy using approximation spectral analysis of signal of acoustic emission crystallization |
(Rus)
|
Lange P.K., Jaroslavkin A.J.
|
Vol 24, No 3 (2016) |
System model and complex evaluation of regional transport infrastructure development project |
(Rus)
|
Gubanov N.G., Kimlyk A.A.
|
Vol 24, No 1 (2016) |
System of automatic control of gas-oil separator control the density of the oily mixture |
(Rus)
|
Zelenskiy V.A., Zhmurov D.B., Shchodro A.I.
|
Vol 20, No 2 (2012) |
System of electric drive of rotation of antenna with variable structure of control channel |
(Rus)
|
Denisov V.A., Zhangirov M.E.
|
Vol 26, No 2 (2018) |
System of electrical insulation state control in networks with voltages up to 1000 volts with dead-earthed neutral |
(Rus)
|
Fominich E.N., Revyakina E.V., Kolesnik I.V., Tishkov A.A.
|
Vol 23, No 3 (2015) |
System of fusion of ice on wires of powers line without loading switching-off |
(Rus)
|
Bazarov A.A., Danilushkin A.I., Osipov V.S.
|
Vol 20, No 2 (2012) |
Systems analysis of the contribution of science and technology in the development of technology platforms |
(Rus)
|
Diligensky N.V., Tsapenko M.V., Davydo A.N.
|
Vol 21, No 3 (2013) |
Systems approach in perfecting of organizational structure of the gas-distributing organization |
(Rus)
|
Diligenskii N.V., Nemchenko V.I., Posashkov M.V.
|
Vol 27, No 2 (2019) |
Technique of designing immersive simulator for automation of professional training for operators |
(Rus)
|
Glazyrin A.E., Steshina L.A., Petukhov I.V.
|
Vol 19, No 4 (2011) |
Technique of the parametric testing of the technical condition and forecasting of growth defects in units and details of the heat path of flowing part of the gas turbine engine |
(Rus)
|
Projaeva O.A.
|
Vol 19, No 3 (2011) |
Technique registration of images obtained by an air-borne multimatrix scanning optical-electronic converters |
(Rus)
|
Kuznetsov P.K., Martemyanov B.V., Skirmunt V.K., Semavin V.I.
|
Vol 29, No 3 (2021) |
Technological aspects of manufacturing and preparation of mock-up samples of liquid metal fuses for thermal and switching tests |
(Rus)
|
Kuznetsov А.V., Yurenkov Y.P., Agliullov A.I.
|
Vol 21, No 3 (2013) |
Technological support of reliability of the automobile generating installation (GI) |
(Rus)
|
Tsopov G.I., Ovsyannikov V.N., Elshansky N.A.
|
Vol 19, No 3 (2011) |
Technology development of enantioselective addition of diethyl malonate to nitrostyrene |
(Rus)
|
Reznikov A.N., Golovin E.V., Klimochkin Y.N.
|
Vol 24, No 1 (2016) |
Telecommunication cable efficiency performance simulation by means of the system approach |
(Rus)
|
Soliakova E.O.
|
Vol 31, No 3 (2023) |
Telematics and diagnosis system for autonomous cargo vehicle |
(Rus)
|
Orlov S.P., Kosareva E.A.
|
Vol 27, No 3 (2019) |
Teletrafic models based on dual systems with hyperexponential and erlang distributions |
(Eng)
|
Tarasov V.N., Bakhareva N.F., Akhmetshina E.G.
|
Vol 17, No 3 (2009) |
Temperature field at thread-grinding research |
(Rus)
|
Yermokhin N.A.
|
Vol 22, No 3 (2014) |
Temperature fields modeling of the radial electromagnetic bearing |
(Rus)
|
Makarichev Y.A., Ivannikov Y.N.
|
Vol 17, No 3 (2009) |
Temperature fields simulation and control in the induction heating process of aluminum billets, rotating in dc magnetic field |
(Rus)
|
Pleshivtseva Y.E., Zaikina N.V.
|
Vol 26, No 3 (2018) |
Temperature impact on the controlled and neighboring blades of the compressor wheel during measuring of radial clearances with self-compensation of temperature effect on the sensor |
(Rus)
|
Podlipnov P.E.
|
Vol 20, No 4 (2012) |
Test methods using for increasing of rotary viscometers accuracy |
(Rus)
|
Korganova O.G., Kuznetsov V.A.
|
Vol 21, No 3 (2013) |
The accuracy increase of measurement of harmonious signals parameters on the basis of additional voltage formation |
(Rus)
|
Melentiev V.S., Muratova V.V.
|
Vol 21, No 2 (2013) |
The analisys of optimisation effIciEncy of centrifugal pumping equipment operating models in reservoir pressure maintenance systems |
(Rus)
|
Abakumov A.M., Mukhortov I.S.
|
Vol 21, No 2 (2013) |
The analysis of damageability of friction surfaces, estimation of kinetic characteristics of their status and wear resistance prediction |
(Rus)
|
Gromakovsky D.G.
|
Vol 22, No 4 (2014) |
The analysis of errors of the separate determination of the capacitive sensor parameters due to the measuring chain nonideality |
(Rus)
|
Evstifeeva T.S., Levina K.D.
|
Vol 25, No 2 (2017) |
The analysis of functional suitability of hardware-software complexes based on apparatus of statistical indexes |
(Rus)
|
Gvozdev V.E., Blinova D.V., Davlieva A.S.
|
Vol 25, No 1 (2017) |
The analysis of inaccuracy of the methods of the active and reactive power and powers factor measurement on instant signal samplings |
(Rus)
|
Karpova N.E.
|
Vol 21, No 4 (2013) |
The analysis of influence of the quantization error on result of measurement of harmonious signals integrated characteristics |
(Rus)
|
Ivanov Y.M.
|
Vol 26, No 2 (2018) |
The analysis of output voltage quality of frequency converters with the simple laws of power transistors switching |
(Rus)
|
Starikov A.V., Lisin S.L., Rokalo D.Y.
|
Vol 23, No 4 (2015) |
The analysis of the error in the reproduction of the predetermined path of a zero-order predictor position-tracking electric drive |
(Rus)
|
Lysov V.E., Sidorov I.S.
|
Vol 23, No 4 (2015) |
The analysis of the instrumental error of the system for measurement harmonic signals parameters based on the comparison of signals orthogonal components |
(Rus)
|
Jaroslavkina E.E., Muratova V.V., Pozdeeva E.V.
|
Vol 23, No 4 (2015) |
The analysis of the magnesium protector alloys destruction |
(Rus)
|
Kats N.G., Konovalenko D.V., Vasilyev S.V.
|
Vol 20, No 4 (2012) |
The analysis of the method of measurement of parameters of harmonious signals on instant values of their orthogonal components |
(Rus)
|
Ivanov J.M.
|
Vol 23, No 4 (2015) |
The analytical and experimental research of a controlled-damper vibration isolation system |
(Rus)
|
Abakumov A.M., Chebotkov E.G., Randin D.G.
|
Vol 23, No 4 (2015) |
The application of silicate-enamel coatings for oil-field pipelines |
(Rus)
|
Artushkin V.N., Avdeyev V.M.
|
Vol 23, No 4 (2015) |
The application of thermodynamic calculation for the monitoring of the characteristics of gas-distributing-unit gas-turbine drives |
(Rus)
|
Gulina S.A., Gulina A.S.
|
Vol 23, No 4 (2015) |
The architecture of the web-based platform for personalized medicine |
(Rus)
|
Orlov S.P., Zolotov V.P., Yakimov A.V.
|
Vol 19, No 2 (2011) |
The boundary inverse heat conduction problems based on parametric optimization |
(Rus)
|
Diligenskaya A.N.
|
Vol 19, No 3 (2011) |
The boundary inverse heat conduction problems based on parametric optimization |
(Rus)
|
Diligenskaya A.N.
|
Vol 19, No 4 (2011) |
The calculation of the detonation characteristics and tossing ability parameters of 1,3,5-triazine derivatives |
(Rus)
|
Reout I.I., Gidaspov A.A., Krivchenko A.L., Kozhevnikov E.A.
|
Vol 19, No 3 (2011) |
The comparative analysis of inaccuracy of active and reactive power measurement methods and power factor measurement on instant signal samples |
(Rus)
|
Karpova N.E.
|
Vol 23, No 1 (2015) |
THE COMPERATIVE ANALYLISIS OF SHAVING FORMING PROCESS DURING BT8 TITANIUM ALLOY SHAPING |
(Rus)
|
Belov A.N.
|
Vol 21, No 1 (2013) |
The compression - restoration algorithm certification of measuring signals by modified Proni method |
(Rus)
|
Baranov V.A., Terekhina A.V., Cypin B.V.
|
Vol 21, No 3 (2013) |
The concept of development of an information system to support decision making in the management of complex technical systems |
(Rus)
|
Gubanov N.G., Chuvakov A.V.
|
Vol 20, No 3 (2012) |
The control system for an electrical hydromechanical stand simulating a three-dimensional hydraulic gear of a ship lock |
(Rus)
|
Melnikov E.V., Klinov R.A.
|
Vol 21, No 4 (2013) |
the design of high-safety instant-action electric blasting cap for the shotfiring in petroleum industry. The improvement of efficiency and safety of the construction |
(Rus)
|
Postnov S.I., Kozhevnikov E.A., Gidaspov A.A., Rekshinskiy V.A.
|
Vol 20, No 2 (2012) |
The design of high-safety instant-action electricblasting cap for the shotfiring in petroleum industry.1. The substantiation and experimental check of thedesign |
(Rus)
|
Kozhevnikov E.A., Gidaspov A.A., Postnov S.I., Rekshinskiy V.A.
|
Vol 29, No 2 (2021) |
The design of the electromagnetic aluminum mold of periodic action |
(Rus)
|
Bazarov A.A., Navasardyan A.A., Bondareva N.V.
|
Vol 20, No 3 (2012) |
The desining of a heat induction system for fluid conveyance pipes |
(Rus)
|
Bazarov A.A., Danilushkin V.A., Taimolkin A.Y.
|
Vol 23, No 4 (2015) |
The determination of mechanical characteristics of polymerscomprising a flexible pipe |
(Rus)
|
Sinugin A.A., Oparin V.B., Petrovskaya M.V.
|
Vol 23, No 4 (2015) |
The development of an industrial detergent to remove asphaltene-resin-paraffin deposits from the inner surfaces of industrial pipelines and equipment |
(Rus)
|
Konovalov V.V., Sklyuev P.V., Titkova M.S., Tatarinova E.E., Dalke A.G.
|
Vol 21, No 3 (2013) |
The development of intellectual network-centric system (smart grid) of adaptive resource allocation in integrated networks of gas, heat and electricity |
(Rus)
|
Budaev D.S., Larukhin V.B., Kosov D.S., Simonova E.V.
|
Vol 26, No 3 (2018) |
The development of methods and modelsfor the control and prevention of risk situations at the design stage of complex technical systems |
(Rus)
|
Kolodenkova A.E.
|
Vol 24, No 1 (2016) |
The development of models and optimization criteria for an inventory management automatic system on the basis of the tools of the classical automatic- control theory |
(Rus)
|
Sergeev .V., Novikov A.A.
|
Vol 23, No 2 (2015) |
The device for controlling the work of sucker rod in oilwells |
(Rus)
|
Kuznetsov V.A., Matveev O.V.
|
Vol 25, No 4 (2017) |
The distributed control system synthesis of elastic structure |
(Rus)
(Eng)
|
Koval’ V.A., Torgashova O.Y., Stepanov M.F.
|
Vol 17, No 3 (2009) |
The dynamic of multimass mechanism for the tention of an intervening line of feeding vehicles |
(Rus)
|
Kotenev V.V., Osipov V.S., Kotenev V.I., Serjugin S.V.
|
Vol 23, No 2 (2015) |
The dynamics of the powder particles in an explosive plating |
(Rus)
|
Krestelev A.I.
|
Vol 24, No 3 (2016) |
The effect of quantization of instant values of signals at the error of determination of their integral characteristics |
(Rus)
|
Ivanov Y.M.
|
Vol 24, No 3 (2016) |
The effect of quantization of instant values of signals at the error of determination of their integral characteristics |
(Rus)
|
Muratova V.V.
|
Vol 20, No 3 (2012) |
The effective use of renewable energy resources in local consumers power system |
(Rus)
|
Sosnina E.N., Shalukho A.V.
|
Vol 23, No 1 (2015) |
THE EFFICIENCY OF HEATING SYSTEMS CHP |
(Rus)
|
Branfilova A.N., Stefanuk E.V., Kolesnikov S.V., Skvortsova M.P.
|
Vol 20, No 4 (2012) |
The efficiency use of a reserv phase on overhead transmission lines 110-330 KV |
(Rus)
|
Levin D.S., Ugarov G.G.
|
Vol 26, No 1 (2018) |
The efficient design of inductors |
(Rus)
|
Zimin L.S., Leonenko A.S.
|
Vol 17, No 3 (2009) |
The electromagnetic powder snubber of repeated blows for a pulse seismosource |
(Rus)
|
Pevchev V.P.
|
Vol 27, No 3 (2019) |
The energy efficiency of cooling the natural gas
With variable frequency drive fans |
(Eng)
|
Abakumov A.M., Antropov V.E., Vedernikov A.S., Abakumov O.A.
|
Vol 23, No 1 (2015) |
THE ESTIMATION OF SURFACE HARDENING INFLUENCE ON THE ENDURANCE LIMIT OF CYLINDRICAL PARTS OF VARIOUS DIAMETERS UNDER STRESS CONCENTRATION CONDITIONS |
(Rus)
|
Radchenko V.P., Lunin V.V., Kirpichev V.A.
|
Vol 21, No 1 (2013) |
The estimation of the measuring device error of integrated characteristics of harmonious signals with phase-shifting blocks |
(Rus)
|
Ivanov J.M., Sinitsyn A.E., Simonov A.V.
|
Vol 24, No 4 (2016) |
The field tests of pipe steels in solution with high content of H2S and CO2 |
(Rus)
|
Borisenkova T.A.
|
Vol 17, No 3 (2009) |
The formation of accuracy and stiffness the bearing of the rotor-type unit by assembly connection |
(Rus)
|
Denisenko A.F., Yakimov M.V.
|
Vol 21, No 1 (2013) |
The formulation of the problem of the beam fluctuations with moving spring-loaded support |
(Rus)
|
Anisimov V.N., Litvinov V.L., Korpen I.V.
|
Vol 17, No 3 (2009) |
The impact research of water receiving means for application on hydropower plants |
(Rus)
|
Balzannikov M.I., Selivyorstov V.A.
|
Vol 22, No 1 (2014) |
The improvement of the methods of measuring the integrated characteristics on instant values of orthogonal components of signals |
(Rus)
|
Ivanov Y.M.
|
Vol 20, No 3 (2012) |
The inaccuracy of measurements of a single-coil eddy-current sensor detecting element temperature in thermo-compensation channels of the system for information acquisition about blade tips multidimensional displacements and the inaccuracy-reduction technique |
(Rus)
|
Borovik S.Y., Kuteynikova M.M., Sekisov Y.N., Skobelev O.P.
|
Vol 20, No 4 (2012) |
The increase of measurement’s accuracy of parameters of capacitor gauges due to change of the configuration of measuring circuit |
(Rus)
|
Melentiev V.S., Latuhova O.A., Smolina A.M., Evstifeeva T.S.
|
Vol 24, No 1 (2016) |
The induction heating system in the production of technical silicon |
(Rus)
|
Bazarov A.A., Navasardyan A.A.
|
Vol 21, No 2 (2013) |
The influence of manufacture technologie on residual stresses and fatigue resistance of splined parts |
(Rus)
|
Vakuljuk V.S.
|
Vol 23, No 3 (2015) |
The influence of reservoir permeability heterogeneity on filtration of reservoir fluid to production wells |
(Rus)
|
Andriyanova E.V., Astafiev V.I.
|
Vol 20, No 3 (2012) |
The influence of residual stresses thermal exposition samples of alloy ep742 after ultrasonic hardening |
(Rus)
|
Radchenko V.V., Kirpichyov V.A., Lunin V.V.
|
Vol 20, No 3 (2012) |
The influence of roller strengthening on the endurance limit of samples with a pressurized hub |
(Rus)
|
Pavlov V.F., Vakulyuk V.S., Sazanov V.P., Mikhalkina S.A.
|
Vol 29, No 2 (2021) |
The initialization of initial generating equipment maintenance schedules while a heuristic method is used |
(Rus)
|
Gubin P.Y., Oboskalov V.P.
|
Vol 21, No 1 (2013) |
The integral method of determining the parameters of multielement two pole circuit sinusoidal effects |
(Rus)
|
Hrisanov N.N.
|
Vol 17, No 3 (2009) |
The integrative methods for managing the innovative activity of enterprises |
(Rus)
|
Semenov V.S., Glukhova L.V.
|
901 - 1000 of 1139 Items |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 > >> |