Issue |
Title |
File |
Vol 23, No 4 (2015) |
Induction system for removal of thermal stresses in the pipe after welding |
(Rus)
|
Bazarov A.A., Chigirev D.Y.
|
Vol 25, No 2 (2017) |
Influence analysis of discrete position-control drive on corrective unit synthesis |
(Rus)
|
Lysov V.E., Kolesnikov I.P.
|
Vol 25, No 4 (2017) |
INFLUENCE OF AXIAL DISPLACEMENTS OF TURBOMACHINE IMPELLER ON THE RESULTS OF MEASUREMENT OF RADIAL CLEARANCES WITH THE SELF-COMPENSATION OF TEMPERATURE IMPACT ON THE SENSOR |
(Rus)
|
Kuteynikova M.M., Podlipnov P.E.
|
Vol 19, No 3 (2011) |
Influence of conditions of sintering of hard alloy WC-Co 10-ОМ on its structure and property |
(Rus)
|
Zaharov D.A., Amosov A.P.
|
Vol 19, No 4 (2011) |
Influence of damping properties of alloys on ullet-proofness |
(Rus)
|
Aleksentseva S.E., Zacharov I.V.
|
Vol 21, No 1 (2013) |
Influence of degradation processes and severe plastic deformation on defective of pipe steel |
(Rus)
|
Petrov P.P., Ivanov A.M., Platonov A.A.
|
Vol 19, No 2 (2011) |
Influence of heat treatment on impact strength of chisel steel |
(Rus)
|
Pugacheva T.M., Solovyeva Y.B., Klimenko A.V.
|
Vol 17, No 3 (2009) |
Influence of high-cycle fatigue actions on physical-mechanical state of the plane samples hardened case |
(Rus)
|
Radchenko V.P., Morozov A.P., Bukatiy A.S.
|
Vol 31, No 3 (2023) |
Influence of nano-oil preparation conditions on its electrical strength |
(Rus)
|
Loskutov V.A., Prokopenko Y.G., Rydel A.V., Goreva L.P.
|
Vol 30, No 1 (2022) |
Influence of operating dc network parameters on the operation insulation monitoring system on the ground |
(Rus)
|
Skripachev M.O., Vedernikov A.S.
|
Vol 20, No 2 (2012) |
Influence of stream turbulence on transfer factor of electro-acoustic converter of flowmeter |
(Rus)
|
Krylov A.O.
|
Vol 21, No 2 (2013) |
Influence of structure and hardness of cast aluminum alloys Al-Si and Al-Si-Cu systems on the quality of ion-plasma coatings |
(Rus)
|
Muratov V.S., Khamin O.N., Zakopets O.I.
|
Vol 27, No 1 (2019) |
Influence of the pulse-width modulation on the harmonic composition of the output voltage of a frequency converter |
(Rus)
|
Starikov A.V., Lisin S.L., Rokalo D.Y.
|
Vol 21, No 3 (2013) |
Influence of the recycled abrasive grain on the quality of grinding wheels on a ceramic bond |
(Rus)
|
Vetkasov N.I., Khudobin L.V., Mikliailin S.M., Morozova A.G., Zhdanov S.V.
|
Vol 23, No 3 (2015) |
Influence of the trapezoidal form of the voltage on magnetic field rotation in alternating current electric motors |
(Rus)
|
Starikov A.V., Rokalo D.Y.
|
Vol 20, No 2 (2012) |
Influences of optical faktor on estimate of surface roughess by optico-electronic complex |
(Rus)
|
Abramov A.D.
|
Vol 19, No 4 (2011) |
Information-measuring system for control parameters of underground water intake |
(Rus)
|
Orlov S.P., Nechaev D.A.
|
Vol 19, No 4 (2011) |
Information-measuring system of quantitative content of impurities present in the flow of oil |
(Rus)
|
Kulikovsky K.L., Yakunina V.V.
|
Vol 20, No 3 (2012) |
Initialization of the process of heating and cooling mechatronic module |
(Rus)
|
Lysov V.E., Khorenko M.V.
|
Vol 21, No 4 (2013) |
Initiation of detonation by collisional waves in fill-up and water-filled industrial cyclonite |
(Rus)
|
Krivchenko A.L., Klyuster I.A.
|
Vol 22, No 4 (2014) |
Installation of complex computer-aided design system at design institute |
(Rus)
|
Artyushkin I.V.
|
Vol 25, No 4 (2017) |
INSTALLATION OF MICROWAVE DIELECTRIC HEATING WITH TUNABLE FREQUENCY |
(Rus)
|
Fedorov N.V.
|
Vol 29, No 1 (2021) |
Integral formulation of solutions of boundary-value problems of heat and mass transfer in domains with moving boundaries |
(Rus)
|
Shevelev V.V.
|
Vol 20, No 4 (2012) |
Integrated assessment of the machine-building production operational calendar plan |
(Rus)
|
Brazhnikov M.A., Safronov E.G.
|
Vol 24, No 2 (2016) |
Integrated modeling and process control of continuous induction heating of ferromagnetic workpieces |
(Rus)
|
Bazarov A.A., Danilushkin A.I., Danilushkin V.A.
|
Vol 30, No 1 (2022) |
Intelligent system of adaptation typical laws automatic regulation with the function of identification structure and parameters object |
(Rus)
|
Lysenko D.S.
|
Vol 19, No 3 (2011) |
Intensification of the process of paper cable insulation drying in vacuum boilers |
(Rus)
|
Mikheev A.G.
|
Vol 25, No 1 (2017) |
Interaction of porous Ti3SiC2 MAX-phase with Ni melt in SHS process |
(Rus)
|
Latukhin E.I., Amosov A.P., Borisov D.V., Ryabov A.M., Novikov V.A., Illarionov A.Y.
|
Vol 31, No 2 (2023) |
Interval traffic analysis of multichannel queuing systems |
(Rus)
|
Likhttsinder L.Y., Privalov A.Y.
|
Vol 26, No 3 (2018) |
Investigation of an active vibration protection system based on a linear direct current motor |
(Rus)
|
Abakumov A.M., Randin D.G., Bochkov V.V.
|
Vol 19, No 3 (2011) |
Investigation of modal representations of object with restrictions on configuration of distributed control |
(Rus)
|
Guseva M.A.
|
Vol 21, No 3 (2013) |
Investigation of process of hydrotreating of petroleum fractions and slow carbonizated gasoline on the basis of technical catalysts |
(Rus)
|
Zhavoronkova N.V., Konovalov V.V., Minaev P.P., Pimerzin A.A.
|
Vol 25, No 2 (2017) |
Investigation of solution shs of complex copper and chromium oxides nanopowders and their application in catalytic oxidation of CO |
(Rus)
|
Novikov V.A., Komzolov A.V., Zhadyaev A.A.
|
Vol 21, No 4 (2013) |
Investigation of temperature and thermal stress state of boiler drums heat power plants |
(Rus)
|
Kolesnikov S.V., Kuznetsova A.E., Stefanuk E.V., Branfileva A.N., Abisheva L.S.
|
Vol 22, No 3 (2014) |
Investigation of the cam mechanism motion law with structural elements deformations |
(Rus)
|
Podgorny Y.I., Kirillov A.V., Maksimchuk O.V.
|
Vol 20, No 2 (2012) |
Investigation of the composition and structure of themulticomponent SHS-compacted targets for the ARC-PVDin the two material systems TI-C-AL and TI-C-AL-S |
(Rus)
|
Ermoshkin А.А.
|
Vol 25, No 3 (2017) |
INVESTIGATION OF THE POSSIBILITY OF INTRODUCING A LEAVING POWDER NICKEL ADDITIVE IN THE COMPOSITION OF THE MATRIX BASES OF Al AND Al-Cu |
(Rus)
|
Lutz A.R., Rybakov A.D., Ionov M.K.
|
Vol 19, No 2 (2011) |
Investigation of the relationship between acoustic emission and destruction stonecasting material under uniaxial compression |
(Rus)
|
Ignatov M.N., Ignatova A.M., Artemov A.O., Asanov V.A.
|
Vol 31, No 4 (2023) |
Investigation of the thermal regime of a linear DC motor |
(Rus)
|
Makarichev Y.A., Ratzev Y.A.
|
Vol 30, No 2 (2022) |
Investigation of thermal field of the limited-angle torque motor |
(Rus)
|
Ivannikov Y.N., Ovsyannikov V.N.
|
Vol 18, No 7 (2010) |
ISPOL'ZOVANIE KOMPARIROVANIYa MGNOVENNYKhZNAChENIY PERIODIChESKIKh SIGNALOV DLYa OPREDELENIYaIKh INTEGRAL'NYKh KhARAKTERISTIK |
(Rus)
|
Melent'ev V.S., Kozhevnikova E.G.
|
Vol 18, No 7 (2010) |
ISPOL'ZOVANIE SISTEMNOGO PODKhODA PRI AVTOMATIZATsII NEPRERYVNYKh TEKhNOLOGIChESKIKh PROTsESSOV KABEL'NOGO PROIZVODSTVA |
(Rus)
|
Mitroshin V.N., Mitroshin Y.V.
|
Vol 18, No 7 (2010) |
ISSLEDOVANIE APPROKSIMATsIONNYKh ALGORITMOV REShENIYa OBRATNYKh ZADACh TEKhNIChESKOY DIAGNOSTIKI |
(Rus)
|
Batishchev V.I., Volkov I.I., Zolin A.G.
|
Vol 18, No 7 (2010) |
ISSLEDOVANIE IZMENENIYa MAKROSTRUKTURY METALLA UPROChNENNYKh TsILINDRIChESKIKh OBRAZTsOV IZ SPLAVOV V95 I D16T VSLEDSTVIE TEMPERATURNYKh VYDERZhEKI MNOGOTsIKLOVYKh USTALOSTNYKh ISPYTANIY |
(Rus)
|
Radchenko V.P., Morozov A.P.
|
Vol 18, No 7 (2010) |
ISSLEDOVANIE PROTsESSOV PLAZMOOBRAZOVANIYa I VZAIMODEYSTVIYa PLAZMENNYKh POTOKOV S PREGRADAMI I MEZhDU SOBOY |
(Rus)
|
Isaev D.V., Krivchenko A.L., Reut I.I.
|
Vol 25, No 4 (2017) |
Issues of automated management optimization of fuel consumption for charge mixture sintering to boost productivity and quality of sinter |
(Rus)
(Eng)
|
Ryabchikov M.Y., Ryabchikova E.S., Mukhina E.Y., Simusev Y.A.
|
Vol 21, No 2 (2013) |
Iterative algorithm for separating signals using wavelet regularization |
(Rus)
|
Sayfullin R.T.
|
Vol 19, No 3 (2011) |
Iterative method of calculation of characteristics of highways of transport communication networks |
(Rus)
|
Gavlievskiy S.L.
|
Vol 30, No 4 (2022) |
Justification of the feasibility of use of frequency converters in control stations of submersible centrifugal pumps |
(Rus)
|
Starikov A.V., Kazantsev A.A., Kosorlukov I.A.
|
Vol 19, No 4 (2011) |
K 75-letiyu so dnya rozhdeniyaYuriya Petrovicha Samarina |
(Rus)
|
Radchenko V.P., Saushkin M.N.
|
Vol 25, No 1 (2017) |
Key problems during use induction heaters |
(Rus)
|
Zimin L.S., Yeghiazaryan A.S.
|
Vol 26, No 3 (2018) |
Knowledge management in the intersubjective management of socio-technical objects innovative development |
(Rus)
|
Moiseeva T.V.
|
Vol 21, No 2 (2013) |
Language semantics of khowledge representation in the intellectual frame-based environment |
(Rus)
|
Belousov A.I., Deriabkin V.P.
|
Vol 27, No 3 (2019) |
Linear approximation of artificially colored surfaces reflection spectra by the principal component analysis |
(Eng)
|
Arapov S.Y., Arapova S.P., Dubinin I.S.
|
Vol 27, No 4 (2019) |
Linearized mathematical model of submersible asynchronous motor |
(Rus)
|
Starikov A.V., Lisin S.L., Tabachnikova T.V., Kosorlukov I.A., Belyaeva O.S.
|
Vol 26, No 2 (2018) |
Long-term HPP mode optimization of the Angara-Yenisei Cascade |
(Rus)
|
Trufakin S.S., Panteleev V.I., Sovban E.A., Rusina A.G.
|
Vol 27, No 3 (2019) |
Managing the process of reduction gas in gas pipelines |
(Rus)
|
Kryukov V.V., Tugov V.V.
|
Vol 31, No 4 (2023) |
Managing the staffing process of the Samara region oil industry |
(Rus)
|
Tuponosova E.P., Livshits M.Y., Golovanov P.A.
|
Vol 19, No 3 (2011) |
Matching syntactical and semantic text models in natural language text analisys |
(Rus)
|
Moshkov I.S.
|
Vol 18, No 7 (2010) |
Matematicheskoe modelirovanie i analiz protsessov upravleniya proizvodstvennymi sistemami |
(Rus)
|
Diligenskaya A.N.
|
Vol 18, No 7 (2010) |
MATEMATIChESKOE MODELIROVANIE UPRAVLYaEMYKh GIDRODINAMIChESKIKh PROTsESSOV TRUBOPROVODNOGO TRANSPORTA ZhIDKIKh UGLEVODORODOV |
(Rus)
|
Afinogentov A.A., Pleshivtseva Y.E., Snopkov A.S.
|
Vol 18, No 7 (2010) |
MATEMATIKA, ALGORITMY, TEZIS T'YuRINGA-ChERChA I METAFIZIKA ARISTOTELYa |
(Rus)
|
Krylov S.M.
|
Vol 25, No 1 (2017) |
Mathematic simulation of heat and mass transferprocessin the reaction element of thermochemical heat recovery system |
(Rus)
|
Pashchenko D.I., Chastikova O.L., Mihedov A.A.
|
Vol 21, No 4 (2013) |
Mathematical analysis of automated process of the cylindrical details assemble |
(Rus)
|
Chernyahovskaya L.B.
|
Vol 27, No 1 (2019) |
Mathematical description of mutual influence in a symmetric circuit (lan cable) on the basis of the equation of partial capacities Maxwell |
(Rus)
|
Denisov V.Y., Mitroshin V.N., Chostkovskiy B.K.
|
Vol 19, No 2 (2011) |
Mathematical description of oil separation process under acoustic influence |
(Rus)
|
Pishchukhin A.M., Tugov V.V., Fakhritdinov T.B.
|
Vol 30, No 2 (2022) |
Mathematical model of a digital AC servo drive with different discritization periods in regulators taking into account |
(Rus)
|
Rokalo D.Y.
|
Vol 20, No 4 (2012) |
Mathematical model of electromagnetic field of the multicircuit overhead power line wire operating at stationary mode |
(Rus)
|
Vedernikov A.S., Goldstein V.G., Shishkov E.M.
|
Vol 24, No 1 (2016) |
Mathematical model of heat- and mass-transfer during fractional condensation of hydrocarbon vapor in presence of inert gas in a vessel with vertical contact grids |
(Rus)
|
Lesukhin M.S., Kriuchkov D.A.
|
Vol 30, No 3 (2022) |
Mathematical model of laser tracker measur-ing system for multiple control of large constructions |
(Rus)
|
Sazonnikova N.A., Uklein R.V.
|
Vol 27, No 2 (2019) |
Mathematical model of multi-channel analog-digital converter with optimum code selection procedure |
(Rus)
|
Khrisanov N.N.
|
Vol 27, No 1 (2019) |
Mathematical model of optical chanel of information-measuring fluorometric system |
(Rus)
|
Kulikov V.S., Grishanov V.N., Cherepanov K.V.
|
Vol 25, No 3 (2017) |
MATHEMATICAL MODEL OF SYNCHRONOUS GENERATORFOR SMALL WIND POWER PLANT |
(Rus)
|
Makarichev Y.A., Zubkov Y.V., Anufriev A.S., Pevchev V.P.
|
Vol 20, No 2 (2012) |
Mathematical model of synchronous machine with controlled excitation |
(Rus)
|
Kotenev V.I., Kotenev A.V., Osipov V.S., Kochetkov V.V.
|
Vol 24, No 2 (2016) |
Mathematical model of the digital servo drive with the asynchronous executive engine |
(Rus)
|
Starikov A.V., Jabasova D.N., Rokalo D.Y.
|
Vol 20, No 4 (2012) |
Mathematical model of the electric arc |
(Rus)
|
Voronin A.A., Kulakov P.A.
|
Vol 23, No 1 (2015) |
MATHEMATICAL MODEL OF THE PROCESS OF HEATING ELECTRICAL EQUIPMENT COMPARTMENT OF A FLOOR VEHICLE FOR CONTROL OF ITS DRIVE PERFORMANCE |
(Rus)
|
Kotenev V.I., Kotenev A.V.
|
Vol 27, No 3 (2019) |
Mathematical model of the short circuiting process in the electrical power network with the current-limiting device based on liquid metal self-healing fuse |
(Eng)
|
Kuznetsov А.V., Yurenkov Y.P.
|
Vol 19, No 2 (2011) |
Mathematical modeling and technological process management of optical fibre extraction |
(Rus)
|
Tchostkovski B.K., Galiullin R.S.
|
Vol 25, No 2 (2017) |
Mathematical modeling of network modes at the nonsymmetry of their parameters and loads |
(Rus)
|
Burjanina N.S., Koroljuk J.F., Lesnykh E.V., Suslov K.V., Gogolev R.O.
|
Vol 23, No 3 (2015) |
Mathematical modeling of the pressure distribution in a moving fluid based on electro - hydraulic analogy |
(Rus)
|
Kolesnikov S.V., Branfileva A.N., Abisheva L.S., Fedotenkova A.V.
|
Vol 19, No 4 (2011) |
Mathematical modelling of process of diffusion as distributed object of control with variable structure |
(Rus)
|
Mandra A.G.
|
Vol 20, No 2 (2012) |
Mathematical modelling of process of diffusion as distributed object of control with variable structure |
(Rus)
|
Mandra A.G., Anikin E.V.
|
Vol 31, No 1 (2023) |
Mathematical models and structures of the vehicle lateral stability stabilization system |
(Rus)
|
Abakumov A.M., Goryachkin A.A., Ovsyannikov V.N.
|
Vol 20, No 4 (2012) |
Mathematical simulation of electric fields multielectrode electro-capacity converters at cross – through-flow sensing |
(Rus)
|
Steblev Y.I., Susarev S.V., Vashurkina E.S.
|
Vol 31, No 4 (2023) |
Measurement of electrical conductivity of transformer oil based nanofluid |
(Rus)
|
Korobejnikov S.M., Shevchenko V.E., Rydel A.V., Goreva L.P.
|
Vol 19, No 3 (2011) |
Measurement system for arctic research |
(Rus)
|
Tatarenko E.I.
|
Vol 25, No 1 (2017) |
Measuring x-ray-graphical parameters of quartz for standardless quick assessment of mineral contents |
(Rus)
|
Pescov A.V., Olkhovskaya V.A.
|
Vol 26, No 4 (2018) |
Mechanism of target search and information collection on scientometrical indicators as a support tool of managing solutions in formation of personnel reserve of the university |
(Rus)
|
Chekotilo E.Y., Kichigina O.Y.
|
Vol 22, No 3 (2014) |
Medical expert system architecture of differential diagnosis |
(Rus)
|
Le N.V., Kamaev V.A., Panchenko D.P., Trushkina O.A.
|
Vol 21, No 1 (2013) |
Memory of N.V. Diligensky |
(Rus)
|
Livshits M.Y.
|
Vol 19, No 2 (2011) |
Method and algorithm of distribution of investments between regional enterprises, companies and firms |
(Rus)
|
Semenov V.S., Alexsandrova Y.N.
|
Vol 21, No 2 (2013) |
Method and means for adequate protection settings remote |
(Rus)
|
Borovikov Y.S., Gordienko I.S., Sulaymanov A.O.
|
Vol 29, No 4 (2021) |
Method for aligning the load graph powerful induction plants |
(Rus)
|
Bazarov A.A., Danilushkin A.I.
|
Vol 29, No 3 (2021) |
Method for calculating the resistance of an asynchronous squirrel cage motor according to passport data and estimation of its error |
(Rus)
|
Kotenev V.I., Stulov A.D.
|
Vol 20, No 4 (2012) |
Method for multiple detection of separation combined chromatographic signals |
(Rus)
|
Saifullin R.T., Aleksandrov S.S.
|
Vol 29, No 1 (2021) |
Method for reducing the amplitudes of higher harmonics in the output voltage of the frequency converter |
(Rus)
|
Starikov A.V., Lisin S.L., Belyaeva O.S., Kirdyashev V.A.
|
Vol 23, No 1 (2015) |
METHOD FORCOMMUNICATION SESSIONSBETWEEN CONTROL TOWER AND SWARM OF SPACECRAFTSADAPTIVE SCHEDULINGBY COMMUNICATION RELIABILITY AND EFFICIENCY CRITERIA |
(Rus)
|
Kalashnikov D.A., Solovyov V.A., Skobelev P.O., Simonova E.V., Mayorov I.V., Lakhin O.I., Tichonov D.I., Voroszheykin V.N.
|
Vol 24, No 3 (2016) |
Method, mathematical model and control algorithm of technological process of oil separation |
(Rus)
|
Zelenskiy V.A., Shchodro A.I.
|
Vol 23, No 4 (2015) |
Method of adaptive planning of communication sessions for the ISS orbit correction |
(Rus)
|
Kalashnikov D.A., Solovyov V.A., Skobelev P.O., Simonova E.V., Tikhonov D.I., Vorozheikin V.N.
|
401 - 500 of 1139 Items |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 > >> |