| Issue |
Title |
File |
| Vol 28, No 1 (2020) |
To 115-th anniversary of Vitaly Nikolaevich Nikolsky |
(Rus)
|
|
Barsova A.A.
|
| Vol 28, No 1 (2020) |
To 115-th anniversary of Longin Frantsevich Kulikovsky |
(Rus)
|
|
Lange P.K., Karganova O.G.
|
| Vol 26, No 3 (2018) |
Neural network modeling for process of oil dehydration on the basis of incomplete experimental data |
(Rus)
|
|
Artyushkin I.V.
|
| Vol 26, No 3 (2018) |
The development of methods and modelsfor the control and prevention of risk situations at the design stage of complex technical systems |
(Rus)
|
|
Kolodenkova A.E.
|
| Vol 26, No 3 (2018) |
Automation of the isolation process by polymerin the manufacture of wired communication cables |
(Rus)
|
|
Mitroshin V.N., Kolpashchikov S.A.
|
| Vol 26, No 3 (2018) |
Knowledge management in the intersubjective management of socio-technical objects innovative development |
(Rus)
|
|
Moiseeva T.V.
|
| Vol 26, No 3 (2018) |
Structure of the system of measurable properties for objects exposed to multidimensional observation and experiments |
(Rus)
|
|
Samoylov D.E., Semenova V.A., Smirnov S.V.
|
| Vol 26, No 3 (2018) |
Modelling and optimization of airpreparation system for the gaz pumping unit |
(Rus)
|
|
Tyan V.K., Abushaev R.Y., Arteeva T.E., Gulina S.A., Nutfullin R.G., Tsyganenko N.D., Sheludko L.P.
|
| Vol 26, No 3 (2018) |
Synthesis of the reverse filter on the criterion of minimum quadratic error of the weight function mismatch of the path «direct - reverse filter» |
(Rus)
|
|
Batishchev V.I., Volkov I.I., Zolin A.G.
|
| Vol 26, No 3 (2018) |
Software of information-measurement system for operative spectral analysis |
(Rus)
|
|
Mashkov A.V., Zhelonkin A.V.
|
| Vol 26, No 3 (2018) |
Temperature impact on the controlled and neighboring blades of the compressor wheel during measuring of radial clearances with self-compensation of temperature effect on the sensor |
(Rus)
|
|
Podlipnov P.E.
|
| Vol 26, No 3 (2018) |
Investigation of an active vibration protection system based on a linear direct current motor |
(Rus)
|
|
Abakumov A.M., Randin D.G., Bochkov V.V.
|
| Vol 26, No 3 (2018) |
Application of quality management mechanisms to increase the reliability of operationof the electrical technical complexof underground oil production installations |
(Rus)
|
|
Goldstein V.G., Romanov V.S.
|
| Vol 26, No 3 (2018) |
Parametric analysis and optimal design of induction system with respect to the maximum efficiency criteria |
(Rus)
|
|
Danilushkin A.I., Danilushkin V.A., Zhivotyagin D.A.
|
| Vol 26, No 3 (2018) |
Optimization of voltage levels in active-adaptive networks with distributed generation |
(Rus)
|
|
Kubarkov Y.P., Kulaev I.S., Alekhin R.A.
|
| Vol 26, No 3 (2018) |
Calculation of the control angle of the phase-shifting transformer (PST) at a task of the fixed power flow through a branch |
(Rus)
|
|
Loktionov S.V.
|
| Vol 26, No 3 (2018) |
The principles of the hybrid back-to-back hvdc model |
(Rus)
|
|
Ufa R.A., Sulaymanova V.A., Gusev A.S., Stavitskiy S.A.
|
| Vol 26, No 2 (2018) |
Research of the dynamics of the multidimensional systemof automatic control of the technological processof ceramsite burning |
(Rus)
|
|
Galitskov K.S., Galitskov S.Y., Samokhvalov O.V.
|
| Vol 26, No 2 (2018) |
Modeling the temperature distribution of the boiler drum wall |
(Rus)
|
|
Danilushkin I.A., Syrov I.M.
|
| Vol 26, No 2 (2018) |
Recovering the properties of thecorrelationfunction after the integral transformation |
(Rus)
|
|
Kuznetsov V.V.
|
| Vol 26, No 2 (2018) |
Efficency analysis of closed loop control systems for distributed parameter objects with interval uncertainty of the plant characteristics |
(Rus)
|
|
Levin I.S.
|
| Vol 26, No 2 (2018) |
Stationary characteristics of unreliable two-channel queueing loss system with immediately replenishable time reserve |
(Rus)
|
|
Peschansky A.I.
|
| Vol 26, No 2 (2018) |
Algorithmization of operational and acceptance control of technological processes of cableproduction |
(Rus)
|
|
Chostkovskiy B.K., Mitroshin V.N.
|
| Vol 26, No 2 (2018) |
Complex heat exchange features in once-through steam generator’s screw-shaped firebox |
(Rus)
|
|
Shchelokov A.I., Makarov I.V., Rakhimova Y.I.
|
| Vol 26, No 2 (2018) |
Stages of realizationof the principal component method in processing of signals from analytical instruments |
(Rus)
|
|
Saifullin R.T., Aleksandrov S.S.
|
| Vol 26, No 2 (2018) |
Algorithms for temperature correction of physical quantities sensors |
(Rus)
|
|
Steblev Y.I., Dusmukhambetov R.K., Popova T.Y., Lapshina A.Y.
|
| Vol 26, No 2 (2018) |
Realization of the principle of logical deployment in measurement systems |
(Rus)
|
|
Hrisanov N.N.
|
| Vol 26, No 2 (2018) |
Methods of operational measurements of integral characteristics of periodic signals |
(Rus)
|
|
Yaroslavkina E.E., Muratova V.V.
|
| Vol 26, No 2 (2018) |
The research of automatic control systems of natural gas air-cooling units |
(Rus)
|
|
Abakumov A.M., Stepashkin I.P.
|
| Vol 26, No 2 (2018) |
Modeling of the process of collision of the armature with the inductor in the pulsed electromagnetic source of seismic waves |
(Rus)
|
|
Anufriev A.S., Pevchev V.P.
|
| Vol 26, No 2 (2018) |
Experimental study of brushless generator with integrated exciter |
(Rus)
|
|
Zubkov Y.V.
|
| Vol 26, No 2 (2018) |
Synthesis of corrective device for a closed-loop speed control with digital speed regulator for the precision position-tracking servo drive |
(Rus)
|
|
Lysov V.E., Peshev Y.I.
|
| Vol 26, No 2 (2018) |
The analysis of output voltage quality of frequency converters with the simple laws of power transistors switching |
(Rus)
|
|
Starikov A.V., Lisin S.L., Rokalo D.Y.
|
| Vol 26, No 2 (2018) |
Numerical modeling of the plane dielectric drying process in the ray type microwave chamber |
(Rus)
|
|
Trigorly S.V., Alekseev V.S., Zakharov V.V., Kalganova S.G.
|
| Vol 26, No 2 (2018) |
Long-term HPP mode optimization of the Angara-Yenisei Cascade |
(Rus)
|
|
Trufakin S.S., Panteleev V.I., Sovban E.A., Rusina A.G.
|
| Vol 26, No 2 (2018) |
System of electrical insulation state control in networks with voltages up to 1000 volts with dead-earthed neutral |
(Rus)
|
|
Fominich E.N., Revyakina E.V., Kolesnik I.V., Tishkov A.A.
|
| Vol 26, No 2 (2018) |
Electromagnetic and thermal effects induction heating |
(Rus)
|
|
Zimin L.S., Leonenko A.S.
|
| Vol 26, No 2 (2018) |
Control valves modelling using the MIR PIA Software |
(Rus)
|
|
Konygin S.B.
|
| Vol 26, No 2 (2018) |
Algoritmic methods for improving accuracy of drilling instrument weight and axial load on bit |
(Rus)
|
|
Kuznetsov V.A., Prilepin A.V.
|
| Vol 26, No 1 (2018) |
Two-channel time-optimal control of the process of nonstationary heat conductivity |
(Rus)
|
|
Rapoport E.Y., Ilina N.A.
|
| Vol 26, No 1 (2018) |
Fuzzy optimization in the problems of forklift path planning |
(Rus)
|
|
Rogachev G.N., Rogachev N.G.
|
| Vol 26, No 1 (2018) |
Comparative analysis the efficiency of CRM for companies |
(Rus)
|
|
Rybakova I.A., Orlov S.P.
|
| Vol 26, No 1 (2018) |
About the functionality of the specialized software of the account of movement of the mass of oil products in commodity and raw merchant parks |
(Rus)
|
|
Trufanov Y.S.
|
| Vol 26, No 1 (2018) |
Sampling errors estimation in the determination of codes extreme values in systems for measurements of radial clearances in compressors of turbomachines |
(Rus)
|
|
Belopukhov V.N., Borovik S.Y., Podlipnov P.E.
|
| Vol 26, No 1 (2018) |
Development of method and software for determining the size of grain of aluminum |
(Rus)
|
|
Bochkarev A.V., Zobnin P.Y., Yaroslavkina E.E.
|
| Vol 26, No 1 (2018) |
Rational frequencies of rotors rotation detection for the minimize their radial runout |
(Rus)
|
|
Gasparov E.S., Petrunin V.I.
|
| Vol 26, No 1 (2018) |
Determination of quantities and sizes of solid particles in the oil flow on the basis of ultrasound method |
(Rus)
|
|
Lange P.K., Pautova A.S.
|
| Vol 26, No 1 (2018) |
Energy efficiency of the generator of the wind power engineering unit in the conditions of changing rate of rotation |
(Rus)
|
|
Anufriev A.S., Makarichev Y.A., Zubkov Y.V.
|
| Vol 26, No 1 (2018) |
Development of a mathematical model of an electrotechnical complex of nodal substation and obtaining the main analytical dependences |
(Rus)
|
|
Goldstein V.G., Nurbosynov D.N., Tabachnikova T.V.
|
| Vol 26, No 1 (2018) |
Multisectional installation of indirectinduction heating of the liquid |
(Rus)
|
|
Danilushkin A.I., Krivosheev V.E., Vasiliev I.V.
|
| Vol 26, No 1 (2018) |
Devices for protection of high-voltageelectric equipment with voltage 6 (10) kV from powerful electromagnetic exposurES |
(Rus)
|
|
Fominich E.N., Revyakina E.V., Kolesnik I.V., Kuryakov E.V.
|
| Vol 26, No 1 (2018) |
Calculation of heat losses in the underground laying of pipelines |
(Rus)
|
|
Branfileva A.N., Eremin A.V., Gabdushev R.Z., Demkova E.M.
|
| Vol 26, No 1 (2018) |
Gas-cooler installation for compressor shops of the maigas pipelines |
(Rus)
|
|
Sheludko L.P., Gulina S.A., Goryunova I.Y., Vlasov G.V.
|
| Vol 26, No 1 (2018) |
Phase equilibrium for Pb-Sb-Sn alloy during vacuum distillation |
(Rus)
|
|
Korolev A.A., Krayukhin S.A., Maltsev G.I.
|
| Vol 26, No 1 (2018) |
The measurement of a thin crystal structure of minerals |
(Rus)
|
|
Peskov A.V., Tarasova E.Y.
|
| Vol 26, No 1 (2018) |
The research of the spatial-temporal influence of heterogeneity creep deformation on the relaxation residual stresses in the surface-hardened hollow cylinder of D16T alloy |
(Rus)
|
|
Radchenko V.P., Liberman A.E., Ruzov A.V.
|
| Vol 26, No 1 (2018) |
The efficient design of inductors |
(Rus)
|
|
Zimin L.S., Leonenko A.S.
|
| Vol 26, No 1 (2018) |
Application of the mir pia software for computer modeling of oil separation systems |
(Rus)
|
|
Ivanyakov S.V., Kryuchkov D.A.
|
| Vol 26, No 1 (2018) |
Chemical analysis of the magnesium alloy corrosion destruction |
(Rus)
|
|
Katz N.G.
|
| Vol 26, No 1 (2018) |
Automated testing system for the database contains the components thermophysical properties |
(Rus)
|
|
Konygin S.B., Konovalenko D.V.
|
| Vol 25, No 4 (2017) |
TWO-STAGE NORMALIZATION OF OUTPUT SIGNALS OF ARTIFICIAL NEURAL NETWORKS |
(Rus)
|
|
Girin R.V., Orlov S.P.
|
| Vol 25, No 4 (2017) |
DETERMINATION OF THE PARAMETERS OF MATHEMATICAL MODELS WITH THE USE OF NEURAL NETWORK TECHNOLOGIES |
(Rus)
|
|
Gubanov N.G., Kuzichkin A.A.
|
| Vol 25, No 4 (2017) |
OWNERS AND MANUFACTURERS AS OBJECTS OF A CONCEPTUAL MODEL FOR CORPORATIVE DEVELOPMENT |
(Rus)
|
|
Ivanova L.B.
|
| Vol 25, No 4 (2017) |
The distributed control system synthesis of elastic structure |
(Rus)
(Eng)
|
|
Koval’ V.A., Torgashova O.Y., Stepanov M.F.
|
| Vol 25, No 4 (2017) |
DYNAMIC MODEL FORM OF A WELDED SEAM FOR ARGON-ARC WELDING WITH NON-MATCHED ELECTRODE |
(Rus)
|
|
Omelyanenko K.N., Myuller V.V.
|
| Vol 25, No 4 (2017) |
Optimization of maintenance period for the elements of resource-supplying networks with branching structure |
(Rus)
(Eng)
|
|
Peschansky A.I., Rogachev G.N., Kovalenko A.I.
|
| Vol 25, No 4 (2017) |
Issues of automated management optimization of fuel consumption for charge mixture sintering to boost productivity and quality of sinter |
(Rus)
(Eng)
|
|
Ryabchikov M.Y., Ryabchikova E.S., Mukhina E.Y., Simusev Y.A.
|
| Vol 25, No 4 (2017) |
STRATEGY OF SYNTHESIS AND OPTIMIZATION OF DIGITAL CONTROL SYSTEMS OF TECHNOLOGICAL PROCESSES OF COMMUNICATION CABLES PRODUCTION |
(Rus)
|
|
Chostkovskiy B.K., Mitroshin V.N.
|
| Vol 25, No 4 (2017) |
INFLUENCE OF AXIAL DISPLACEMENTS OF TURBOMACHINE IMPELLER ON THE RESULTS OF MEASUREMENT OF RADIAL CLEARANCES WITH THE SELF-COMPENSATION OF TEMPERATURE IMPACT ON THE SENSOR |
(Rus)
|
|
Kuteynikova M.M., Podlipnov P.E.
|
| Vol 25, No 4 (2017) |
CORRECTION OF THE DYNAMIC ERROR OF INERTIAL SENSORS |
(Rus)
|
|
Lange P.K.
|
| Vol 25, No 4 (2017) |
ELECTRICAL LOSSES IN THE STATOR THREE-PHASE ASYNCHRONOUS MOTORS SERIES AIR |
(Rus)
|
|
Osipov V.S., Timinska E.I.
|
| Vol 25, No 4 (2017) |
MODELING AND TESTING OF MICROWAVE ELECTROTECHNOLOGICAL INSTALLATION FOR A HIGH-TEMPERATURE HEAT TREATMENT OF CERAMICS |
(Rus)
|
|
Trigorly S.V., Kozhevnikov V.Y., Zakharov V.V.
|
| Vol 25, No 4 (2017) |
INSTALLATION OF MICROWAVE DIELECTRIC HEATING WITH TUNABLE FREQUENCY |
(Rus)
|
|
Fedorov N.V.
|
| Vol 25, No 4 (2017) |
BRAKING WITHOUT DEFORMATION OF A BULLET OF FIRE-ARMS WITH HIGH ENERGY |
(Rus)
|
|
Aleksentseva S.E., Zacharov I.V.
|
| Vol 25, No 4 (2017) |
ANALYTICAL SOLUTION OF THE NON-STATIONARY HEAT TRANSFER PROBLEM FOR A LAMINAR FLUID FLOW IN A CYLINDRICAL CHANNEL |
(Rus)
|
|
Kudinov V.A., Eremin A.V., Stefaniuk E.V., Zhukov V.V., Tarabardina T.B.
|
| Vol 25, No 4 (2017) |
OBTAIN APPROXIMATE ANALYTICAL SOLUTIONS OF HYPERBOLIC EQUATIONS THERMAL CONDUCTIVITY |
(Rus)
|
|
Kudinov I.V., Kurganova O.Y., Maksimenko G.N., Abisheva L.S.
|
| Vol 25, No 4 (2017) |
THE PREPARATION OF POWDER NITRIDE COMPOSITION IS AlN-TiN SYSTEMS «HALIDES OF ALUMINUM AND TITANIUM - SODIUM AZIDE» ASIDNEY TECHNOLOGY OF SELF-PROPAGATIHG HIGH-TEMPERATURE SYNTHESIS |
(Rus)
|
|
Kondratieva L.A.
|
| Vol 25, No 4 (2017) |
SHS-EXTRUSION OF LONG-DIMENSIONAL RODS BASED ON TiB / Ti |
(Rus)
|
|
Konstantinov A.S., Bolotskaya A.V., Bazhin P.M., Stolin A.M.
|
| Vol 25, No 4 (2017) |
THE OBTAINING NANOPOWDER PSEUDO-LIGATURES CU-ALN FOR MODIFICATION OF ALUMINUM ALLOYS |
(Rus)
|
|
Kuzina A.A., Titova Y.V.
|
| Vol 25, No 4 (2017) |
DEVELOPMENT OF SENSOR BASED ON Cd-CONTAINING PAN FILMS FOR H2S CONTROL IN ATMOSPHERE |
(Rus)
|
|
Semenistaya T.V., Ivanenko A.V.
|
| Vol 25, No 4 (2017) |
COMPETITIVENESS OF ELECTROTHERMAL HEATING METHODS |
(Rus)
|
|
Zimin L.S., Yeghiazaryan A.S.
|
| Vol 25, No 4 (2017) |
MODERN METHODS OF IMPROVING THE QUALITY OF ELECTRICITY |
(Rus)
|
|
Milishkina O.V., Zlobin V.A.
|
| Vol 25, No 3 (2017) |
SYNTHESIS OF OPTIMAL CONTROL ALGORITHMS FOR PROCESS OF INDUCTION HEATING OF STEEL |
(Rus)
|
|
Artur M.H.
|
| Vol 25, No 3 (2017) |
PROBLEMS OF INTERSUBJECTIVE MANAGEMENT OF SOCIO-TECHNICAL OBJECTS INNOVATIVE DEVELOPMENT |
(Rus)
|
|
Moiseeva T.V.
|
| Vol 25, No 3 (2017) |
MONITORING OF TEMPERATURE ANOMALIES IN A MULTI-NITROGEN GROUND OF EXPANSION OBJECTS |
(Rus)
|
|
Vladov Y.R., Vladova A.Y.
|
| Vol 25, No 3 (2017) |
EVALUATION OF EFFICIENCY OF AUTOMATED INFORMATION SYSTEMS |
(Rus)
|
|
Yashin V.N.
|
| Vol 25, No 3 (2017) |
MODELING OF ELECTROMAGNETIC PROCESSES IN A MULTILAYER THREE-PHASE INDUCTION CYLINDRICAL SYSTEM |
(Rus)
|
|
Bazarov A.A., Danilushkin A.I., Danilushkin V.A., Vasilyev I.V.
|
| Vol 25, No 3 (2017) |
SHAPE OPTIMIZATION OF THE INDUCTOR FOR HARDENING OF SPHERICAL SURFACES |
(Rus)
|
|
Klochkova N.N., Obukhov A.V., Protsenko A.N.
|
| Vol 25, No 3 (2017) |
MATHEMATICAL MODEL OF SYNCHRONOUS GENERATORFOR SMALL WIND POWER PLANT |
(Rus)
|
|
Makarichev Y.A., Zubkov Y.V., Anufriev A.S., Pevchev V.P.
|
| Vol 25, No 3 (2017) |
ANALYSIS OF HARMONIOUS STRUCTURE OF THE TRAPEZOIDAL PHASE VOLTAGE FORMED BY THE FREQUENCY CONVERTER |
(Rus)
|
|
Starikov A.V., Kuznetsov V.V., Rokalo D.Y.
|
| Vol 25, No 3 (2017) |
THERMODYNAICS OF NIOBIUM CARBIDE DEPOSITING PROCTSS FROM GAS PLASE |
(Rus)
|
|
Belov A.N.
|
| Vol 25, No 3 (2017) |
OBTAINING EXACT ANALYTICAL SOLUTIONS OF HYPERBOLIC EQUATIONS IN THE HYDRAULIC SHOCK IN THE PIPELINE |
(Rus)
|
|
Kartashov E.M., Stefanyuk E.V., Kolesnikov S.V., Branfileva A.N., Maksimenko G.N.
|
| Vol 25, No 3 (2017) |
RESEARCH OF THE HEAT-SHIELDING OF EXTERNAL PROTECTIONS OF BUILDINGS AT THE EMERGENCY HEAT SUPPLY |
(Rus)
|
|
Rafalskaya T.A., Mansurov R.S., Berezka A.K., Savenkov A.A.
|
| Vol 25, No 3 (2017) |
ENERGY EFFICIENT ORGANIZATION OF ELECTROPLATING PRODUCTION AT A LARGE MACHINE-BUILDING ENTERPRISE |
(Rus)
|
|
Romanova A.S.
|
| Vol 25, No 3 (2017) |
METHOD OF ADDITIONAL REQUIRED FUNCTIONS IN TASKS OF HEAT CONDUCTION WITH VARIABLE PHYSICAL PROPERTIES OF THE ENVIRONMENT |
(Rus)
|
|
Skvortsova M.P., Kudinov I.V., Klebleev R.M., Gavrilova T.E., Rodionov V.A.
|
| Vol 25, No 3 (2017) |
SOLUTION OF THE PROBLEM OF CYCLIC CONTANT HEAT CHANGE FOR THE SYSTEM OF TWO PLANE BODIES IN CASE OF DEFORMATION HEAT INITIATION |
(Rus)
|
|
Stulin V.V.
|
| Vol 25, No 3 (2017) |
CREATING OF A MODEL FOR CALCULATING THE COEFFICIENTS OF THE TEMPERATURE INFLUENCE OF THE ENVIRONMENT ON THE ENERGY CONSUMPTION OF THE REGION BY A THIRD-ORDER POLYNOMIAL |
(Rus)
|
|
Chernyshev S.V.
|
| Vol 25, No 3 (2017) |
MODEL OF DISTRIBUTION OF THE DIFFRACTOGRAM OF COMBUSTION PRODUCTS OF SHS SYSTEMS BY THE EXAMPLE «19Si + 17C + 6NaN3 + (NH4)2SiF6» |
(Rus)
|
|
Gubanov S.I., Bolotskaya A.V., Amosov E.A., Illarionov A.Y., Titova Y.V.
|
| Vol 25, No 3 (2017) |
INVESTIGATION OF THE POSSIBILITY OF INTRODUCING A LEAVING POWDER NICKEL ADDITIVE IN THE COMPOSITION OF THE MATRIX BASES OF Al AND Al-Cu |
(Rus)
|
|
Lutz A.R., Rybakov A.D., Ionov M.K.
|
| Vol 25, No 3 (2017) |
SYNTHESIS OF DETERMINATED-STATISTICAL MODELS FORM OF A WELDED SEAM FOR ARGON-ARC WELDING WITH A NON-CONSUMABLE ELECTRODE |
(Rus)
|
|
Myuller V.V., Omelyanenko K.N.
|
| 1 - 100 of 936 Items |
1 2 3 4 5 6 7 8 9 10 > >>
|
