Influence of dislocation density of copper electrode on the kinetics of anode process in acidic CuSO4 solution

Abstract


Deformed copper samples were burned at different temperatures. This procedure formed different dislocation density in the samples. Then such prepared samples were used as the anodes in acidic C11SO4 solution. The voltage for electrolyse was 10 mV. The experiment has shown that the increase of the dislocation density in the anode leads to the increase of the density of anode current. It was discovered that the density of anode current could become 2,5 times bigger. This can be explained by the fact that dislocations decrease the potential barrier during the transfer of copper ions from the grid into the electrolyte.

About the authors

Alexey D Vasil'ev

Samara State Technical University

Email: vasilyevad@mail.ru
(д.ф.-м.н.), профессор, каф. общей физики и физики нефтегазового производства; Самарский государственный технический университет; Samara State Technical University

Sergey I Kosulin

Samara State Technical University

студент; Самарский государственный технический университет; Samara State Technical University

Sergey N Balakirov

Samara State Technical University

студент; Самарский государственный технический университет; Samara State Technical University

References

  1. Дамаскин Б. Б. Петрий О. А., Цирлина Г. А. Электрохимия. - М.: Химия; Колосс, 2006. - 672 с.
  2. Новиков И. И. Дефекты кристаллического строения. - М.: Металлургия, 1983. - 232 с.
  3. Иверонова В. И., Ревкевич Г. Г. Теория рассеивания рентгеновских лучей. - М.: МГУ, 1978. - 276 с.

Statistics

Views

Abstract - 14

PDF (Russian) - 2

Cited-By


Refbacks

  • There are currently no refbacks.

Copyright (c) 1970 Samara State Technical University

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies