Journal of Samara State Technical University, Ser. Physical and Mathematical SciencesJournal of Samara State Technical University, Ser. Physical and Mathematical Sciences1991-86152310-7081Samara State Technical University2062910.14498/vsgtu1739Research ArticleCompliance functions of electromagnetoelastic piezoelectric and piezomagnetic half-plane and half-space with functionally graded or layered coatingsVasilievAndrey SergeevichCandidate of physico-mathematical sciences, no statusandre.vasiliev@gmail.comDon State Technical University1509201923347549614022020Copyright © 2019, Samara State Technical University2019The paper addresses to the construction of the compliance functions of axissymmetric and plane contact problems of electromagnetoelasticity for semi-infinite piezoelectric piezomagnetic solids with functionally graded or piece-wise homogeneous coatings. Materials of coating and substrate are assumed to be transversely isotropic. Computation of the compliance functions are reduced to the solution of two-point boundary value problems for a system of ordinary differential equations with variable coefficients are obtained using integral transformation technique. Boundary conditions of these systems describe distributed tangential or normal mechanical loading or action of an electrical of magnetic fields. Dual integral equations and their systems are obtained for contact problems on indentation by an insulating and conductive punches with kernel transforms equal to compliance functions. Asymptotic behavior of the compliance functions is analyzed. Specially designed approximations for the kernel transforms are constructed based on the analysis of their properties. These approximations make it possible to construct the solutions of the approximated systems of dual integral equations in a closed analytical form. Numerical results illustrating all 10 independent compliance functions are provided for different materials of coating and substrate and different types of variation of properties in depth of the coating. It is shown that in the case of absence of the tangential mechanical loading all the compliance functions are positive. Conditions of existing sign alternating compliance functions corresponding tangential mechanical loading are analyzed. The differences between the properties of the compliance functions, corresponding to homogeneous and functionally graded coatings are illustrated.electromagnetoelasticitycontact mechanicscompliance functionsfunctionally graded materialscoatingsэлектромагнитоупругостьмеханика контактного взаимодействияфункции податливостифункционально-градиентные материалыпокрытия[Wang Y., Hu J., Lin Y., Nan C. W., "Multiferroic magnetoelectric composite nanostructures", NPG Asia Mater., 2:2 (2010), 61-68][Fetisov Y. K., G. Srinivasan., "Electric field tuning characteristics of a ferrite-piezoelectric microwave resonator", Appl. Phys. Lett., 88:14 (2006), 143503][Zhai J., Dong S., Xing Z., Li J., Viehland D., "Geomagnetic sensor based on giant magnetoelectric effect", Appl. Phys. Lett., 91:12 (2007), 123513][Wang M. L., Wang G., "Electromagnetic sensors for assessing and monitoring civil infrastructures", Sensor Technologies for Civil Infrastructures, Woodhead Publishing Series in Electronic and Optical Materials, 1, Elsevier Science, 2014, 238-264][Liu X., Ou-Yang J., Tong B., Chen S., Zhang Y., Zhu B., Yang X., "Influence of the delta-E effect on a surface acoustic wave resonator", Appl. Phys. Lett., 114:6 (2019), 062903][Chen W., Pan E., Wang H., Zhang C., "Theory of indentation on multiferroic composite materials", J. Mech. Phys. Solids, 58:10 (2010), 1524-1551][Rogowski B., Kalinski W., "Indentation of piezoelectromagneto-elastic half-space by a truncated conical punch", Int. J. Eng. Sci., 60 (2012), 77-93][Zhou Y. T., Lee K. Y., "Contact problem for magneto-electro-elastic half-plane materials indented by a moving punch. Part I: Closed-form solutions", Int. J. Solids Struct., 49:26 (2012), 3853-3865][Zhou Y. T., Kim T. W., "An exact analysis of sliding frictional contact of a rigid punch over the surface of magneto-electro-elastic materials", Acta Mech., 225:3 (2014), 625-645][Elloumi R., Guler M. A., Kallel-Kamoun I., El-Borgi S., "Closed-form solutions of the frictional sliding contact problem for a magneto-electro-elastic half-plane indented by a rigid conducting punch", Int. J. Solids Struct., 50:24 (2013), 3778-3792][Elloumi R., Kallel-Kamoun I., El-Borgi S., Guler M. A., "On the frictional sliding contact problem between a rigid circular conducting punch and a magneto-electro-elastic half-plane", Int. J. Mech. Sci., 87 (2014), 1-17][Зеленцов В. Б., Митрин Б. И., Айзикович С. М., "Динамическая и квазистатическая неустойчивость скользящего термофрикционного контакта", Трение и износ, 37:3 (2016), 280-289][Зеленцов В. Б., Митрин Б. И., Лубягин И. А., "Износостойкость материалов покрытий в условиях разогрева от трения", Трение и износ, 38:4 (2017), 302-310][Зеленцов В. Б., "Индикация термоупругой неустойчивости скользящего контакта с помощью заглубленной пьезокерамической прослойки", Вестник Пермского национального исследовательского политехнического университета. Механика, 2017, № 1, 63-84][Ma J., Ke L. L., Wang, Y. S., "Frictionless contact of a functionally graded magneto-electro-elastic layered half-plane under a conducting punch", Int. J. Solids Struct., 51:15-16 (2014), 2791-2806][Ma J., Ke L. L., Wang, Y. S., "Sliding frictional contact of functionally graded magneto-electro-elastic materials under a conducting flat punch", J. Appl. Mech., 82:1 (2015)][Ma J., El-Borgi S., Ke L. L., Wang Y. S., "Frictional contact problem between a functionally graded magnetoelectroelastic layer and a rigid conducting flat punch with frictional heat generation", J. Thermal Stresses, 39:3 (2016), 245-277][Erdogan F., Gupta G. D., "On the numerical solution of singular integral equations", Quart. Appl. Math., 29:4 (1972), 525-534][Krenk S., "On quadrature formulas for singular integral equations of the first and the second kind", Quart. Appl. Math., 33:3 (1975), 225-232][Yilmaz K. B., Comez I., Yildirim B., Güler M. A., El-Borgi S., "Frictional receding contact problem for a graded bilayer system indented by a rigid punch", Int. J. Mech. Sci., 141 (2018), 127-142][Zhang X., Wang Z., Shen H., Wang Q. J., "Frictional contact involving a multiferroic thin film subjected to surface magnetoelectroelastic effects", Int. J. Mech. Sci., 132-132 (2017), 633-648][Gurtin M. E., Ian Murdoch A., "Frictional contact involving a multiferroic thin film subjected to surface magnetoelectroelastic effects", Int. J. Mech. Sci., 132-132 (2017), 633-648][Huang G., Yu S., "Effect of surface piezoelectricity on the electromechanical behaviour of a piezoelectric ring", Physica Status Solidi, 243:4 (2006), 22-24][Dinzart F., Sabar H., "Magneto-electro-elastic coated inclusion problem and its application to magnetic-piezoelectric composite materials", Int. J. Solids Struct., 48:16-17 (2011), 2393-2401][Kachanov M., Sevostianov I., "Effective properties of heterogeneous materials", Micromechanics of Materials, with Applications, Solid Mechanics and its Applications, 249, Springer, Cham, 2018, 315-467][Васильев А. С., Волков С. С., Айзикович С. М., "Приближeнное аналитическое решение задачи о вдавливании проводящего штампа в электроупругое полупространство с неоднородным покрытием", Докл. Акад. наук, 478:1 (2018), 34-39][Айзикович С. М., "Асимптотическое решение одного класса парных уравнений", ПММ, 54:5 (1990), 872-877][Sadyrin E. V., Vasiliev A. S., Volkov S. S., Mitrin B. I., Aizikovich S. M., "Simplified analytical solution of the contact problem on indentation of a coated half-space by a spherical punch", WIT Trans. Eng. Sci., 122 (2019), 209-221][Nan C. W., "Magnetoelectric effect in composites of piezoelectric and piezomagnetic phases", Phys. Rev. B, 50:9 (1994), 6082-6088][Айзикович С. М., Александров В. М., "О свойствах функций податливости, соответствующих слоистому и непрерывно-неоднородному полупространству", Докл. АН СССР., 266:1 (1982), 40-43][Ильман В. М., Приварников А. К., "Действие системы штампов на упругое многослойное основание", Прикл. мех., 7:6 (1971), 25-30][Бабешко В.А., "Интегральные уравнения свертки первого рода на системе отрезков, возникающие в теории упругости и математической физике", ПММ, 35:1 (1971), 88-99][Vasiliev A. S., Volkov S. S., Aizikovich S. M., "Normal point force and point electric charge in a piezoelectric transversely isotropic functionally graded half-space", Acta Mech., 227:1 (2016), 263-273][Vasiliev A. S., Volkov S. S., Aizikovich S. M., Mitrin B. I., "Plane contact problem on indentation of a flat punch into a transversely-isotropic half-plane with functionally graded transversely-isotropic coating", Z. Angew. Math. Phys., 68:1 (2017)][Kudish I. I., Volkov S. S., Vasiliev A. S., Aizikovich S. M., "Some Criteria for Coating Effectiveness in Heavily Loaded Line EHL Contacts. Part 1. Dry Contacts", J. Trib., 138:2 (2016)][Волков С. С., Васильев А. С., Айзикович С. М., Селезнев Н. М., Леонтьева А. В., "Напряженно-деформированное состояние упругого мягкого функционально-градиентного покрытия при внедрении сферического индентора", Вестник Пермского национального исследовательского политехнического университета. Механика, 2016, № 4, 20-34][Volkov S. S., Vasiliev A. S., Aizikovich S. M., Mitrin B. I., "Axisymmetric indentation of an electroelastic piezoelectric half-space with functionally graded piezoelectric coating by a circular punch", Acta Mech., 230:4 (2019), 1289-1302]