Designing of dynamic calculation model of press with pump-accumulator drive working stroke
- Authors: Shinkarenko O.M1, Korchak E.S1
-
Affiliations:
- Donbass State Engineering Academy
- Issue: Vol 16, No 2 (2012)
- Pages: 124-131
- Section: Articles
- Submitted: 18.02.2020
- Published: 15.06.2012
- URL: https://journals.eco-vector.com/1991-8615/article/view/20903
- ID: 20903
Cite item
Full Text
Abstract
Peculiarities of hydraulic press ram moving on different stages of the working stroke on the basis of experimental oscillogram are considered. Rated scheme of the working stroke with pointing out the assumptions of the hard hydraulic drive model is adduced. Dynamic calculation models of the first and second stages of the working stroke of hydraulic press with pump-accumulator drive are designed. Description of the coefficients of differential Ricatti equation is given, its analytical decision concerning real forging press is adduced. Presented moving metal-and-fluid masses, viscous hydraulic resistance of the line accumulator - press and the active press force on the working stroke are considered in detail. Its influence on ram moving on the working stroke is revealed. The influence of constructive characteristic and shutting time of the control valve on the dynamics of ram decelerating on the working stroke is analyzed.
Keywords
About the authors
Oleg M Shinkarenko
Donbass State Engineering Academy(к.т.н., доц.), доцент, кафедра машин и технологии обработки металлов давлением; Донбасская государственная машиностроительная академия; Donbass State Engineering Academy
Elena S Korchak
Donbass State Engineering Academy
Email: helen_korchak@ukr.net
доцент, кафедра машин и технологии обработки металлов давлением; Донбасская государственная машиностроительная академия; Donbass State Engineering Academy
References
- Соколов Л. Н., Золотухин В. Н., Ефимов В. Н. и др. Ковка слитков на прессах / ред. Л. Н. Соколов. Киев: Технiка, 1984. 127 с.
- Шинкаренко О. М., Корчак Е. С. Совершенствование режимов работы гидравлических прессов с насосно-аккумуляторным приводом на холостом ходе / В сб.: Обработка материалов давлением: Cб. научных трудов. Вып. 2 (27). Краматорск: ДГМА, 2011. С. 190-194.
- Белов А. Ф., Розанов Б. В., Линц В. П. Объемная штамповка на гидравлических прессах. М.: Машиностроение, 1986. 256 с.
- Золотухин Н. М., Шинкаренко О. М. Экспериментальное исследование сопротивления поковок деформированию при протяжке // Кузнечно-штамповочное производство, 1980. № 3. С. 3-5.
- Шинкаренко, О. М., Корчак, Е. С. Торможение подвижных частей ковочных прессов с насосно-аккумуляторным приводом // Извест. ТулГУ. Сер. Механика деформируемого твердого тела и обработка металлов давлением, 2006. № 1. С. 346-355.