About residual stresses after rolling and exfoliation of two-ply stripe
- Authors: Struzhanov V.V1
-
Affiliations:
- Institute of Teoretical Engineering, Ural Branch of RAS
- Issue: Vol 14, No 2 (2010)
- Pages: 55-63
- Section: Articles
- URL: https://journals.eco-vector.com/1991-8615/article/view/21039
- ID: 21039
Cite item
Full Text
Abstract
The residual stress definition problem was solved for stripe after rolling in one mill. Lengthwise residual stresses are basic cause of the defect initiation of stripe geometry of the buckles or corrugation type. Lengthwise residual stresses exist in the stripe with transversal residual stresses. These stresses induce the exfoliation of multi-layer stripes. The qualitative model for the two-ply stripe exfoliation under pressure of extension transversal residual stresses field was obtained subject to equality of the stripe materials stress-strain properties. The cause of the stepwise (unexpected) exfoliation was defined. The layer may be depressed essentially wanting the destruction (exfoliation) binding stripe.
About the authors
Valeriy V Struzhanov
Institute of Teoretical Engineering, Ural Branch of RAS
Email: stru@imach.uran.ru
(д.ф.-м.н., проф.), главный научный сотрудник, лаб. микромеханики материалов; Институт машиноведения УрО РАН; Institute of Teoretical Engineering, Ural Branch of RAS
References
- Рудской А. П., Лунев В. А. Теория и технология прокатного производства. - СПб.: Наука, 2008. - 527 с.
- Двинский В. П., Рудаков Р. В. Критическая неравномерность напряжений по ширине полосы при прокатке// Изв. вузов. Чёрная металлургия, 1981. - №3. - С. 72-77.
- Стружанов В. В., Миронов В. И. Деформационное разупрочнение материала в элементах конструкций. - Екатеринбург: УрО РАН, 1995. - 192 с.
- Тимошенко С. П., Гудьер Дж. Теория упругости. - М.: Наука, 1975. - 576 с.
- Комановский А.З., Трощенков П. А., Мовшович В. С. Производство легированных хо-лоднокатанных листов. - М.: Металлургия, 1967. - 160 с.
- Смирнова С. В., Гладковский С. В. Механические свойства и особенности разрушения слоистых металлических композитов после сварки взрывом и пакетной прокатки / В сб.: Актуальные проблемы современной науки: Труды 5-го Меж;дународного форума. Естественные науки. Ч. 1-3: Математика. Математическое моделирование. Механика. - Самара: СамГТУ, 2010. - С. 214-218.
- Gilmore R. Catastrophe Theory for Scientists and Engineers. - New York: Dover, 1993; русск. пер.: Гилмор P. Прикладная теория катастроф: В 2-х книгах; Кн. 1. - М.: Мир, 1984. - 350 с.