NanoScan Spectroindenter: a new approach to nanomechanical testing integrated in Raman microscopes
- Authors: Laktionov I.V.1, Useinov A.S.2, Votyakov S.A.2, Reshetov V.N.1, Sultanova G.H.1
-
Affiliations:
- Moscow Institute of Physics and Technology (National Research University)
- Institute of High-Pressure Physics named after L.F.Vereshchagin RAS
- Issue: Vol 18, No 3-4 (2025)
- Pages: 234-238
- Section: Equipment for Nanoindustry
- URL: https://journals.eco-vector.com/1993-8578/article/view/684398
- DOI: https://doi.org/10.22184/1993-8578.2025.18.3-4.234.238
- ID: 684398
Cite item
Abstract
The design of the NanoScan SpectroIndenter measurement module for integrating a nanohardness tester with a commercially available Raman microscope is presented, using the Renishaw InVia model as an example. An innovative inverse load device layout allows simultaneous time-synchronized measurements of mechanical and optical (structural) characteristics. The design features of the module and its technological advantages for the examination of both transparent and opaque materials are presented.
Keywords
Full Text

About the authors
I. V. Laktionov
Moscow Institute of Physics and Technology (National Research University)
Author for correspondence.
Email: box@ilaktionov.ru
ORCID iD: 0000-0002-8576-3669
Engineer
Russian Federation, DolgoprudnyA. S. Useinov
Institute of High-Pressure Physics named after L.F.Vereshchagin RAS
Email: box@ilaktionov.ru
ORCID iD: 0000-0002-9937-0954
Cand. of Sci. (Physics and Mathematics), Deputy Director
Russian Federation, TroitskS. A. Votyakov
Institute of High-Pressure Physics named after L.F.Vereshchagin RAS
Email: box@ilaktionov.ru
ORCID iD: 0009-0007-9155-2853
Junior Researcher
Russian Federation, TroitskV. N. Reshetov
Moscow Institute of Physics and Technology (National Research University)
Email: box@ilaktionov.ru
ORCID iD: 0000-0002-8426-5991
Doct. of Sci. (Physics and Mathematics), Prof., Docent.
Russian Federation, DolgoprudnyG. H. Sultanova
Moscow Institute of Physics and Technology (National Research University)
Email: box@ilaktionov.ru
ORCID iD: 0000-0002-4770-5724
Engineer
Russian Federation, DolgoprudnyReferences
- Lee J. Structural heterogeneity of pharmaceutical compacts probed by micro-indentation // Journal of Materials Science: Materials in Medicine. 2008. Vol. 19. No. 5. PP. 1981–1990.
- Wang M., Wu J., Zhan X., Guo R., Hui Y., Fan H. On the determination of the anisotropic plasticity of metal materials by using instrumented indentation. Materials & Design. 2016. Vol. 111. PP. 98–107.
- Feng C., Kang B.S. A Transparent Indenter Measurement Method for Mechanical Property Evaluation // Experimental Mechanics. 2006. Vol. 46. No. 1. PP. 91–103.
- Gerbig Y.B., Michaels C.A., Forster A.M., Cook R.F. In situ observation of the indentation-induced phase transformation of silicon thin films. Physical Review B. 2012. Vol. 85. No. 10. P. 104102.
- Kassir-Bodon A., Deschamps T., Martinet C., Champagnon B., Teisseire J., Kermouche G. Raman Mapping of the Indentation-Induced Densification of a Soda-Lime-Silicate Glass. International Journal of Applied Glass Science. 2012. Vol. 3. No. 1. PP. 29–35.
- Maslenikov I.I., Useinov A.S., Doronin M.A., Reshetov V.N. In Situ Surface Imaging Through a Transparent Diamond Tip. Instruments and Experimental Techniques. 2018. Vol. 61. No. 5. PP. 719–724. https://doi.org/10.1134/S002044121804022X
- Useinov A., Reshetov V., Gusev A., Gladkih E. Optical spectroscopy combined in situ with instrumented indentation. Journal of Applied Physics. 2022. Vol. 132. No. 12. https://doi.org/10.1063/5.0099166
- Вотяков С.А., Кудряшов И.А., Budich C. и др. Исследование механических свойств полистирола при индентировании методом спектроскопии Мандельштама-Бриллюэна. Физика твердого тела. 2025. Т. 67. № 1. С. 202–205. https://doi.org/10.61011/FTT.2025.01.59790.355
- Вотяков С.А., Кудряшов И.А., Budich C. и др. Картографирование напряжений in situ при индентировании кремния с использованием спектроскопии комбинационного рассеяния. Известия высших учебных заведений. Серия Химия и химическая технология. 2024. Т. 67. № 10. С. 22–28. https://doi.org/10.6060/ivkkt.20246710.10y
