THEORETICAL RESEARCH OF THE SCAFFOLDER AND SOIL INTERACTION


Cite item

Full Text

Abstract

The purpose of research is to improve the dosing of mineral fertilizers sowing unit, depending on the physico-mechanical properties of the soil. In modern technologies of precision farming with differentiated application of mineral fertilizers, data from various sensors, results of analyzes of soil samples and aerial photography are mainly used, without taking into account factor such as the depth of the humus horizon, which largely determines the soil fertility. On the basis of the Samara State Agricultural Academy, studies are underway on the effect of the depth of the humus horizon on the fertility of the soil. Several machines have been developed for differentiating mineral fertilizers with spreader and cultivator. Currently, a system of differentiated application of mineral fertilizers is being developed for sowing agricultural crops and it is planned to produce a set of equipment for a standard seeder UCS-8 Vesta. A constructive scheme of the device for determining the traction resistance is presented, which is closely related to the depth of occurrence of the humus layer. The main working element of this device is a deformer in the form of a knife, with a dihedral grinding. The article presents theoretical studies of the effect of forces acting on a deformer. Based on the results of the theoretical justification of the technological process of the proposed scheme for determining the traction resistance, the load dependencies on the strain gauge link were derived depending on the drag resistance of the deformer, which is determined by its basic design and technological parameters and the physical and mechanical properties of the soil. The obtained dependences of the traction resistance of the working organs of the tillage implement will theoretically determine the additional energy costs from the introduction of the deformer in the design stage at the design stage of the machine and outline the directions for their optimization.

About the authors

Mikhail Anatol'evich Kanaev

Samara State Agricultural Academy

Email: kanaev_miha@mail.ru

Oleg Vladimirovich Karpov

Samara State Agricultural Academy

Email: oleg@ssaa.ru

Sergey Aleksandrovich Vasilev

Samara State Agricultural Academy

Email: aspmig@mail.ru

Marat Rafailevich Fathutdinov

Samara State Agricultural Academy

Email: fathutdinov_mr@mail.ru

References

  1. Иванайский, С. А. Рабочий орган для предпосевной обработки почвы / С. А. Иванайский, О. М. Парфенов // Актуальные проблемы аграрной науки и пути их решения : сб. науч. тр. – Самарская ГСХА, 2016. – С. 364-366.
  2. Канаев, М. А. Описание конструкции и принцип работы дискового твердомера // Известия Самарской ГСХА. – 2008. – № 3. – С. 5-8.
  3. Канаев, М. А. Дифференцированное внесение удобрений при посеве / М. А. Канаев, С. В. Маш-ков // Сельский механизатор. – 2011. – № 7. – С. 22-23.
  4. Канаев, М. А. Разработка системы автоматизации дифференцированного внесения удобрений при посеве / М. А. Канаев, О. В. Карпов, С. А. Васильев, М. Р. Фатхутдинов // Известия Самарской ГСХА. – 2017. – № 1. – С. 58-62.
  5. Милюткин, В. А. Новый способ дифференцированного внесения удобрений при посеве сельскохозяй-ственных культур / В. А. Милюткин, М. А. Канаев // Известия Самарской ГСХА. – 2010. – № 3. – С. 16-18.
  6. Милюткин, В. А. Система механизации мониторинга и управления плодородием почвы в режиме ON-LINE / В. А. Милюткин, М. А. Канаев, М. А. Кузнецов // Известия Самарской ГСХА. – Самара, 2013. – № 3. – С. 34-39.
  7. Милюткин, В. А. Разработка машин для подпочвенного внесения удобрений на основе агробиологических характеристик растений / В. А. Милюткин, М. А. Канаев // Известия Самарской ГСХА. – 2012. – № 3. – С. 9-13.
  8. Парфенов, О. М. Использование механических колебательных систем в почвообрабатывающих машинах / О. М. Парфенов, С. А. Иванайский, В. В. Переверзов // Известия Самарской ГСХА. – 2009. – № 3. – С. 14-16.
  9. Савельев, Ю. А. Теоретическое обоснование тягового сопротивления батарей ножевых дисков / Ю. А. Савельев, П. А. Ишкин, Ю. М. Добрынин // Известия Самарской ГСХА. – 2011. – № 3. – С. 26-29.
  10. Синеоков, Г. Н. Теория и расчет почвообрабатывающих машин / Г. Н. Синеоков, И. М. Панов – М. : Ма-шиностроение, 1977. – 329 с.

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2017 Kanaev M.A., Karpov O.V., Vasilev S.A., Fathutdinov M.R.

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies