Bulletin Samara State Agricultural AcademyBulletin Samara State Agricultural Academy1997-32252782-4225Samara State Agrarian University50932Research ArticleFUNCTIONAL DIAGRAM OF THE SOWING UNIT BASED ON A PNEUMATICCALLY OPERATED SEEDERKravtsovA. V.Graduate Student of the Department «Engineering Technology»artem-kravtsov-penzgtu@yandex.ruKonovalovV. V.Doctor of Technical Sciences, Professor of the Department «Engineering Technology»konovalov-penza@rambler.ruKuchmasovK. S.Doctor of Technical Sciences, Professor of the Department «Technical service in agriculture»kuhmazov.k.z@pgau.ruZaitsevV. Yu.Candidate of Technical Sciences, Associate Professor of the Department «Engineering Technology»vluzai@gmail.comFSBEI HE Penza State Technological UniversityFSBEI HE Penza State Agrarian University1502202051364423112020Copyright © 2020, Kravtsov A.V., Konovalov V.V., Kuchmasov K.S., Zaitsev V.Y.2020The purpose of the study is developing a structural scheme for the operation of a pneumatic seeding unit. Seeding down is one of the main technological processes determining the final result of total field operations targeted at the cultivation of grains. It is possible to determine the influence of various factors, including design solutions, on the quality performance of the sowing unit by developing and analyzing its structural scheme of functioning. Based on the analysis of constructive-technological scheme of the machine-tractor unit for grains sowing, conditions of work, textural composition and physical and mechanical properties of seed and fertilizer structural diagram of the functioning of the sowing unit with pneumatically operated seeder was developed. The analysis of the structural scheme of functioning of the sowing unit allowed revealing main directions of improvement of qualitative and quantitative indicators of seeding. Improving the accuracy of seeding is determined by setting the seeding machine to a given seeding rate, taking into regard compensation for wheel slippage. The improved uniformity of seeding in rows may account for the improvement of the design of rail line (from the ejector to the distributor) and reduction of the ripple of the sown material from that meter, as well as the partial smoothing of the motion of seed in the pneumatic system of the drill. Reducing seed injury is possible due to the improving the design of the sowing apparatus, reducing the speed mode of the air concentrated product flow, improving the design of the pneumatic system in terms of preventing frontal impacts of particles on the walls of the pneumatic system. Improving the uniformity of seeding in a row is determined by the design of the Coulter group and its compliance with the speed mode of the seeder operation, subject to the permissible values of the air outlet speed from the Coulter.seederpneumatic systemdistributorapparatusunitсеялкапневмосистемараспределительаппаратагрегат[Петров, А. М. Разработка универсальной пневматической сеялки для зерновых, мелкосемянных и трудновысеваемых культур / А. М. Петров, Н. П. Крючин // Известия Самарской ГСХА. - 2014. - № 3. - С. 3-7.][Ларюшин, Н. П. Результаты лабораторных исследований сошника с подпружиненным распределителем и копирующим устройством дна борозды / Н. П. Ларюшин, А. В. Мачнев // Научное обозрение. - 2015. - № 17. - С. 33-39.][Крючин, Н. П. Повышение эффективности распределительно-транспортирующих систем пневматических посевных машин : монография. - Самара : РИЦ СГСХА, 2008. - 176 с.][Мачнев, А. В. Результаты лабораторных исследований высевающего аппарата с несимметричным профилем желобков катушки / А. В. Мачнев, В. А. Мачнев, П. Н. Хорев, А. Н. Хорев // Нива Поволжья. - 2014. - № 2 (31). - С. 76-84.][Мачнева, О. Ю. Исследование взаимодействия семян с распределяющим и отражающим устройствами / О. Ю. Мачнева, В. С. Каблуков, О. Н. Кухарев [и др.] // Вестник Рязанского государственного агротехнологического университета им. П. А. Костычева. - 2018. - № 4 (40). - С. 111-117.][Yatskul, A. Influence of the divider head functioning conditions and geometry on the seeds distribution accuracy of the air-seeder / A. Yatskul, J. P. Lemière, F. Cointault // Biosystems Engineering. - 2017. - №161. - P. 120-134. - DOI: 10.1016/j.biosystemseng.2017.06.015.][Рахимов, З. С. Обоснование параметров пневматической системы транспортирования семян и удобрений почвообрабатывающего посевного агрегата / З. С. Рахимов, Н. Т. Хлызов, И. Р. Рахимов [и др.] // АПК России. - 2017. - Т. 24, № 1. - С. 91-104.][Yatskul, A. Establishing the conveying parameters required for the air-seeders / A. Yatskul, J. P. Lemière // Biosystems Engineering. - 2018. - №166. - P. 1-12. - DOI: 10.1016/j.biosystemseng.2017.11.0015.][Змиевский, В. Т. Влияние различий в высеве отдельными аппаратами на урожайность / В. Т. Змиевский, Н. Н. Домина, Л. Б. Казаков // Механизация и электрификация сельского хозяйства. - 1985. - № 5. - С. 40-41.][Yatskul, A. Comparative energy study of the air-stream loading systems of air-seeders / A. Yatskul, J. P. Lemière, F. Cointault // Engineering in Agriculture, Environment and Food. - 2018. - №11. - P. 30-37. - DOI: 10.1016/j.eaef.2017.09.003.][McKay, M. E. Performance characteristics of pneumatic drills: transverse distribution. - Parkville : University of Melbourne, 1979. - Retrieved from https://trove.nla.gov.au/work/21209973?q&versionId=25298581.][Пятаев, М. В. Моделирование параметров турбулизатора пневматического распределителя семян / М. В. Пятаев // Вестник Челябинской государственной сельскохозяйственной академии. - 2013. - Т. 65. - С. 50-55.][Мударисов, С. Г. Обоснование параметров двухфазного течения «воздух-семена» при математическом описании работы пневматической системы зерновой сеялки / С. Г. Мударисов, З. С. Рахимов // Вестник Башкирского государственного аграрного университета. - 2014. - № 4. - С. 85-91.][Кравцов, А. В. Моделирование скоростного режима движения аэропродуктового потока с параллельно-последовательными участками / А. В. Кравцов, В. В. Коновалов, В. Ю. Зайцев, М. В. Донцова // Известия Самарской государственной сельскохозяйственной академии. - 2019. - № 2. - С. 75-83.][Завражнов, А. И. Теоретический анализ распределительной системы пневмотранспорта на примере сеялок для внесения семян и удобрений / А. И. Завражнов, В. В. Коновалов, В. Ю. Зайцев [и др.] // Наука в центральной России. - 2019. - № 3 (39). - С. 5-14.]