No 3 (2011)

Articles
THEORETICAL RESEARCHES OF SOIL FLAT DISK DYNAMIC INTERACTION
Milyutkin V.A., Kanaev M.A.
Abstract
Theoretical researches of soil flat disk dynamic interaction are considered in the article
Bulletin Samara State Agricultural Academy. 2011;(3):6-10
views
XML
(XML)
ANALYSIS OF SEED METERING-DISK RIBBON SOWING MACHINE PROCESS
Petrov A.M., Zeleva N.V.
Abstract
The article presents and describes the pictures of the disk-belt metering unit and analysis of seed metering-disk ribbon sowing machine process.
Bulletin Samara State Agricultural Academy. 2011;(3):10-13
views
XML
(XML)
HARD LOOSE SOWING MATERIALS DOSING PRINCIPLES PERSPECTIVE
Kryuchin N.P.
Abstract
The estimation of hard loose seeds properties is done. Sowing device for hard loose seeds activity technological processes analysis is offered.
Bulletin Samara State Agricultural Academy. 2011;(3):14-18
views
XML
(XML)
ENERGY FEATURES OF THE SOIL UNDER-STRATUM LOOSENNING IN TIERED TECHNOLOGY OF ITS PROCESSING
Afonin A.E., Gnilomedov V.G., Erzamaev M.P.
Abstract
The technologies and technical facilities of soil tiered processing are considered. Data and analysis of soil under-stratum loosenning technological operation energy estimation in multifunction tiered technology are offered.
Bulletin Samara State Agricultural Academy. 2011;(3):18-23
views
XML
(XML)
NEW TECHNICAL DECISIONS FOR MODERNIZATION IRRIGATION MACHINES "FRIGATE" AND RESULTS OF THEIR INTRODUCTION
Sljusarenko V.V., Ryzhko N.F.
Abstract
Results of irrigation machines "Frigate" modernization technical decisions researches for the purpose of uniformity and quality of watering increase are resulted during wind, decrease in power consumption of watering and productivity increase.
Bulletin Samara State Agricultural Academy. 2011;(3):23-25
views
XML
(XML)
THEORETICAL SUBSTANTIATION OF TRACTION RESISTANCE OF BATTERIES CUT DISKS
Savelyev U.A., Ishkin P.A., Dobrynin U.M.
Abstract
The theoretical substantiation for traction resistance of batteries cut disks for their constructive-technological parameters is given. The conditions for the stability of the cutting element of disks is defined.
Bulletin Samara State Agricultural Academy. 2011;(3):26-29
views
XML
(XML)
STAND FOR CUTTING DEVICE CABBAGE HARVESTING MACHINE RESEARCHING
Toncheva N.N., Alatyrev S.S., Tabakova E.A.
Abstract
In article the description of stand for cutting device cabbage harvesting machine researching is resulted.
Bulletin Samara State Agricultural Academy. 2011;(3):30-32
views
XML
(XML)
MODELING PROCESS OF WHEEL TRACTORS DEFORMATION RUNNING DEVICE
Rusinov A.V.
Abstract
In article the questions on mathematical modeling process of deformation of the wheel running device are considered depending on loading on wheel and physicomechanical properties of soil. Experimental data of trace depth after various designs passing of wheel tractor running device are resulted.
Bulletin Samara State Agricultural Academy. 2011;(3):32-37
views
XML
(XML)
THEORETICAL RESEARCHES OF SOIL REDUCE STRESS-DEFORMED STATE FROM THE TRACTOR MOVER
Sysoeva R.Y.
Abstract
Theoretical researches of the soil stress-state and the magnitude of the soil density in soil horizon from the tractor mover on the field with stubble agricultural background are offered.
Bulletin Samara State Agricultural Academy. 2011;(3):37-39
views
XML
(XML)
RATIONALE OF THE TWO-STAGE CENTRALIZED DOSING PNEUMATIC DISTRIBUTION SYSTEM DRILL
Krasnov S.V.
Abstract
The article analyzes the existing structure of sowing machines distribution systems and two-step air-transporting system of distribution calculation is given.
Bulletin Samara State Agricultural Academy. 2011;(3):39-44
views
XML
(XML)
DESCRIPTION OF SPOOLE PIN SOWING DEVICE CONSTRUCT-TECHNOLOGICAL SCHEME
Sirkin V.A., Petrov A.M., Vasiliev S.A.
Abstract
The scheme of spoole pin sowing device with asynchronous movement of pins is presented and described.
Bulletin Samara State Agricultural Academy. 2011;(3):44-46
views
XML
(XML)
INTEGRO-DIFFERENTIAL MODEL OF CONVECTIVE HEAT AND MASS TRANSFER FOR THE APPLIED PROBLEMS SOLUTION
Dolgorukov N.V., Моlоfeev I.U.
Abstract
New mathematical model, which formulates the problem of convective heat and mass transfer in the integro-differential form, convenient for relatively simple and sufficiently accurate models.
Bulletin Samara State Agricultural Academy. 2011;(3):46-51
views
XML
(XML)
RESULTS OF LABORATORY RESEARCHES OF DISK-SHCHET SOWING DEVICE
Krjuchin N.P., Vdovkin S.V., Krjuchin P.V.
Abstract
Results of research dump of seeds platen rotation frequency influence with various calling and length of elastic elements for seed material completeness dump from surface of sowing disk are resulted.
Bulletin Samara State Agricultural Academy. 2011;(3):51-54
views
XML
(XML)
SUBSTANTIATION OF CUTTING PAWS CONSTRUCTIVE-TECHNOLOGICAL PARAMETRES
Savelyev U.A., Dobrynin U.M.
Abstract
The substantiation of cutting paws constructive-technological parametres with loosening elements of combined soil-cultivating tool working bodies is given. Experimental dependence of soils crushing quality from corners crushing loosening elements working bodies and units movement speed is resulted.
Bulletin Samara State Agricultural Academy. 2011;(3):54-57
views
XML
(XML)
THE DEVICE TO PROVIDE UNIFORM DISTRIBUTION OF IRRIGATION RATES AT THE USE OF IRRIGATION MACHINE "FREGAT"
Sljusarenko V.V., Maryin M.P.
Abstract
The device of irrigation norm regulation, for watering quality improvement during irrigation machine "Fregat" movement direction, depending on the position on the irrigated field.
Bulletin Samara State Agricultural Academy. 2011;(3):57-62
views
XML
(XML)
THEORETICAL JUSTIFICATION OF COMBINED TILLAGE LOOSENING DEVICE UNIT DESIGN AND TECHNOLOGICAL PARAMETERS
Sysoeva R.Y., Petrov M.A.
Abstract
The analytical researches of validate design and technological parameters of combined tillage loosening device unit.
Bulletin Samara State Agricultural Academy. 2011;(3):62-65
views
XML
(XML)
APPRECIATION OF THE ARABLE UNITS MOTION WAYS WITH THE HELP OF THE CALCULATE-EXPERIMENTAL METHOD
Gnilomedov V.G., Sazonov D.S., Sazonova T.N.
Abstract
The analysis of the basic operation-technological indices of the arable unit work at various ways of motion has been carried out and the calculate experimental method of their determination has been also considered.
Bulletin Samara State Agricultural Academy. 2011;(3):65-69
views
XML
(XML)
ACTUAL METHODS OF MOBILE FARM MACHINERY WORKING CAPACITY IMPROVEMENT
Lenivtsev G.A.
Abstract
The reasons of machines working capacity decrease, tribologycal methods role in increase of mobile machines reliability parameters are considered. Rational directions of organizational-technological maintenance of necessary working capacity of machines are proved for their various age level.
Bulletin Samara State Agricultural Academy. 2011;(3):70-73
views
XML
(XML)
RESULTS OF FRICTION CLUTCHES ACCELERATED RESOURCE TESTS
Volodko O.S., Prikazchikov M.S.
Abstract
In this article the results of friction clutches disks accelerated resource tests are presented.
Bulletin Samara State Agricultural Academy. 2011;(3):73-76
views
XML
(XML)
CARRYING OUT METHODOLOGY AND RESULTS OF BENCH TESTS OF THE HYDRAULIC LIQUID FOR TRACTOR HYDROSYSTEMS
Bazhutov D.N.
Abstract
In article the technique of working liquid tests for the hydraulic stand is resulted. Results of bench tests are reflected, the estimation of lubricant composition influence for gear pump deterioration details is given.
Bulletin Samara State Agricultural Academy. 2011;(3):76-79
views
XML
(XML)
EFFECT OF DISK-MOVERS ON THE STABILITY OF THE CULTIVATOR IN THE HORIZONTAL PLANE, AND ITS COMPARATIVE ASSESSMENT OF THE SERIAL UNIT
Musin R.M., Mingalimov R.R., Gashenko A.A.
Abstract
The disk-movers impact data for the stability cultivator unit in horizontal plane. It is proved that the active disk stabilizer using allows, trajectory so as to improve directional stability of the unit for offsetting the resistance of working parts and disk-movers driving force and to increase traction and reduce slipping properties of machine-tractor unit.
Bulletin Samara State Agricultural Academy. 2011;(3):79-83
views
XML
(XML)
COMPARATIVE ESTIMATION OF ENGINE PISTON GROUP CYLINDER TECHNICAL CONDITION METHODS AND DIAGNOSTICS
Kuznetsov S.A., Yanzin V.M.
Abstract
The estimation of tractor diesel engine piston group cylinder technical condition methods and diagnostics , their advantage and lacks, and also results of comparative estimation of measurement reliability results is resulted.
Bulletin Samara State Agricultural Academy. 2011;(3):83-86
views
XML
(XML)
DIESELS TRACTOR CYLINDER HEADS LONGEVITY INCREASING METHOD
Cherkashin N.A.
Abstract
The general tense condition of the diesels cylinder heads is considered and their longevity increasing method is offered
Bulletin Samara State Agricultural Academy. 2011;(3):86-90
views
XML
(XML)
THE THEORETICAL ANALYSIS OF THE ACTIVE GREASING PROCESS IN BEARINGS FRICTION AREA METHOD
Bukhvalov A.S.
Abstract
This article deals with the method of modernized supporting roller for greasing calculation; devise for feeding grease in friction bearing area is also described.
Bulletin Samara State Agricultural Academy. 2011;(3):90-93
views
XML
(XML)
RESOURCE INCREASE OF FRICTION CLUTCHES BY DECREASE IN SORPTION OF HYDROGEN IN SURFACE OF FRICTIONAL DISKS
Prikazchikov M.S.
Abstract
In this article tractor "Kirovets" transmissions frictional disks resource increase method by perfection of the friction mode directed for decrease of hydrogen sorption degree in contacting details surface are considered.
Bulletin Samara State Agricultural Academy. 2011;(3):93-97
views
XML
(XML)
ASSESSMENT OF DIESEL FUEL FOR THE PARAMETERS OF MIXED FUEL
Ukhanov A.P., Averyanov A.S., Rotanov E.G.
Abstract
The experimental studies results of rapeseed oil in diesel fuel mixtures percentage effect for the parameters of diesel fuel.
Bulletin Samara State Agricultural Academy. 2011;(3):97-101
views
XML
(XML)
IMPROVEMENT OF TRACTOR DIESEL ENGINE EXTRA EARNINGS CYLINDER-PISTON GROUP QUALITY WITH PROCESSING FRICTION GEOMODIFIER APPLICATION
Penkovsky S.A., Galenko I.Y.
Abstract
The method of tractor diesel engine running, consisting in friction geomodifier "Edial" entering into lubricant in rational concentration at certain stage of technological running is offered. Application of the given method will allow: to lower capacity of mechanical losses; to reduce extra running deterioration of diesel engine details and to lower the expense of combustive-lubricating materials in operation.
Bulletin Samara State Agricultural Academy. 2011;(3):101-105
views
XML
(XML)
EXPERIMENTAL EVALUATION EFFECT OF COMPOSITE DIESEL FUEL FOR PLUNGER HIGH PRESSURE PUMP WEARING
Ukhanov A.(., Ukhanov D.A., Rotanov E.G., Averyanov A.S.
Abstract
The technique and results of composite diesel fuel plunger high pressure pump wearing influence experimental evaluation.
Bulletin Samara State Agricultural Academy. 2011;(3):105-108
views
XML
(XML)
THE THEORETICAL SUBSTANTION OF MANURE DRAINS DIVISION INTO FRACTIONS WORKING PROCESS IN CENTRIFUGE
Kirov J.A.
Abstract
Theoretical researches of filtering centrifuge advanced design for division into firm and liquid fractions of manure drains are resulted. New analytical dependences of design data-regime device influence on received products division quality are received.
Bulletin Samara State Agricultural Academy. 2011;(3):109-113
views
XML
(XML)
SUBSTANTIATION OF EXTRUDER FEEDER WORKING BODIES DESIGN DATA
Novikov V.V., Harybina N.A.
Abstract
Researches of press-extruder feed zone in which the diameter of pointer anda thickness of spring coil changed are resulted. Measures of design data of wheat, corn, not hulled oats, wheaten bran feeder working bodies are made. Rational values of thickness of spring coil and pointer diameter are chosen.
Bulletin Samara State Agricultural Academy. 2011;(3):113-118
views
XML
(XML)
DETERMINATION OF PRESSURE MIXTURE IN THE OUTPUT SECTION OF THE SCREW PRESS-EXTRUDERS
Mishanin A.L.
Abstract
The theoretical basis for of pressure and peel efforts calculation is created on the output from the matrix of press-extruders and extrusion.
Bulletin Samara State Agricultural Academy. 2011;(3):118-121
views
XML
(XML)
COMPARATIVE RESEARCHES OF ROUND AND FLAT BLADES MIXER
Petrova S.S., Terushkov V.P., Chypshev A.V., Konovalova M.V.
Abstract
Comparative researces of the mixer with round and flat blades are done. Depending on the speed mixers their advantages are found.
Bulletin Samara State Agricultural Academy. 2011;(3):121-124
views
XML
(XML)
MODEL OF DRUM AND STRIP DIELECTRIC SEPARATORS PROCESS
Yepishchenko A.S., Yanzina E.V.
Abstract
The article describes the process model of the dielectric separator drum, the shortcomings and proposed solution of the problem by means of insulating tape are shown .Model of the dielectric separator tape process, the reasons for the benefits of the design with line.
Bulletin Samara State Agricultural Academy. 2011;(3):124-128
views
XML
(XML)
WORKING PROCESS RESEARCH OF MANURE DRAINS CONDENSATION IN THE HIDROCYCLONE-DENSIFIER
Kirov J.A.
Abstract
The design description of hydrocyclone-densifier and working process of manure drains initial weight division on fraction is resulted. Results of researches on the developed experimental installation of hydrocyclone-densifier are resulted.
Bulletin Samara State Agricultural Academy. 2011;(3):128-132
views
XML
(XML)
CORNER SUBSTANTIATION AT THETOP OF THE PRESS-EXTRUDER MATRIX CONE
Uspensky I.V., Mishanin A.L., Janzina E.V.
Abstract
The theoretical substantiation of corner calculation is resulted at the top of press-extruder matrix cone.
Bulletin Samara State Agricultural Academy. 2011;(3):132-137
views
XML
(XML)
RESULTS OF GRAIN FRICTION FACTOR EXPERIMENTAL DEFINITION
Uspensky I.V., Denisov S.V., Harybina N.A.
Abstract
Experimental data of grain friction factor definition are resulted. Friction factor dependences by pressure, humidity and temperature are defined and graphically presented.
Bulletin Samara State Agricultural Academy. 2011;(3):137-140
views
XML
(XML)

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies