No 1 (2026)
EXECUTIVE OPINION
We have always been and remain a high-tech Russian company
8-13
ВЫСТАВКИ И КОНФЕРЕНЦИИ
Jubilee Dianov’s Conference
Abstract
Once every two years, Perm hosts the most prestigious scientific and technical event in the field of fiber optics in our country. From October 7 to 10, 2025, the capital of the Perm region welcomed the 10th All-Russian Dianov’s Conference on Fiber Optics at the traditional venue, the Cultural Space of "Perm Scientific and Production Instrument-Making Company". The report highlights the telecommunications aspect of the event.
16-20
CABLES AND PASSIVE EQUIPMENT
Operator-class FTTH network cable system in the private sector on 0.4 kV power line poles
Abstract
The principles of building an operator-class FTTH network cable system in the private sector, mounted on power line poles, are discussed in light of the requirements of the Russian Ministry of Energy Order No. 327 and the Electrical Installation Regulations (7th edition), taking into account extreme climatic loads.
22-28
WIRELESS COMMUNICATION
30-33
Comparative analysis of methods for configuring LTE network base station parameters
Abstract
A systematic analysis of the key methods for optimizing LTE mobile network base station settings has been conducted. Approaches based on self-organizing networks (SON, Self-Organizing Network), analysis of key indicators of pilot and useful signals, and manual engineering configuration are considered. For each method, the implementation principles, as well as its advantages and limitations, are presented in detail.
34-41
Ray tracing in fifth-generation and beyond radio access networks. Part 2. Theoretical foundations and practical application of the SBR method
Abstract
The paper continues the series dedicated to ray tracing issues in fifth-generation and beyond radio access networks and systematizes the theoretical foundations and practical application scenarios of the Shooting and Bouncing Rays (SBR) method. The physical principles and mathematical models of the SBR method are considered. Using simulation modeling in the Matlab software environment with digital terrain models, the mechanism for adapting the SBR method to the task of predicting ray trajectories in radio access networks with base stations employing antenna arrays is illustrated.
42-50
WIRED COMMUNICATION
Evolution of transport fiber optic transmission systems. Part 3. Advantages of fifth-generation fiber-optic transport networks
Abstract
This series of papers examines the of transport fiber optic transmission systems (FOTS) evolution including standardization and the main directions of FOTS technology development (Part 1); features of transport FOTS generations (Part 2); advantages of fifth-generation fiber-optic transport networks (part 3).
52-60
SATELLITE TELECOMMUNICATIONS
Multibeam and scanning antennas: development for satellite systems over the last 20 years
Abstract
A comprehensive analysis is conducted on design methods development, calculation, and practical implementation of spherical reflector antennas with multibeam systems from 2005 to 2025. The theoretical foundations of hybrid-reflector configurations, evolution of reflector array technologies, and application of these technologies in satellite communication systems in various orbits—from geostationary (GEO) to low Earth orbit (LEO) satellites and megaconstellations are considered. Special attention is given to compensating spherical aberration methods, techniques for controlling radiation patterns and polarization characteristics, as well as an analysis of transitional forms between classical systems and modern intelligent reflective surfaces based on metamaterials. A critical analysis of the applicability of different antenna technologies in the context of satellite systems is carried out.
62-72
ЭЛЕКТРОПИТАНИЕ
Renovation method as a means of maintaining the required level of operational readiness of the UPS fleet in the data center
Abstract
The concept of the renovation method is introduced as a means of maintaining the operational readiness of the power supply system of the data center’s engine room. Taking into account the achieved state of the art and the current market situation, the technical and economic feasibility and prospects of its application are shown. The necessary conditions for applying the proposed approach have been identified and practical recommendations for its implementation have been given.
74-78
