Izvestiya MGTU MAMIIzvestiya MGTU MAMI2074-05302949-1428Moscow Polytechnic University6999310.17816/2074-0530-69993DETERMINATION OF FRICTION COEFFICIENT BY COMPRESSION OF RING SAMPLE DURING HOT DEFORMATIONPetrovA Nк.т.н. доц8-916-505-0754; МГТУ «МАМИ»; MSTU MAMIalexander_petr@mail.ru <mailto:alexander_petr@mail.ru>MSTU MAMI100120126119620030042021Copyright © 2012, Petrov A.N.2012This paper presents an algorithm for the calculation of the coefficient (index) of friction at compression of the ring in hot deformation. The calculation considered the temperature-speed parameters of hot deformation: temperature of the workpiece, temperature of dies, the thermophysical properties of material of a workpiece and a die, parameters of equipment. Calculated curves for μ = μ (r). The authors give the comparative results of calculations and experiments on compression of ring samples in hot conditions.hot forgingcoefficient (index) of frictionmethod of rings compressionгорячая объемная штамповкатрениекоэффициент (показатель) тренияметод осадки кольца[Петров А.Н., Андрейченко Т.П. Применение коллоидно-графитовых смазочных материалов при горячей обработке металлов давлением // Кузнечно-штамповочное производство и Обработка металлов давлением. М.: 2008, №6, с.39-41][Петров А.Н. Комплексная оценка свойств коллоидно-графитовых смазочных материалов для процессов горячего деформирования металлов и сплавов // Кузнечно-штамповочное производство и Обработка металлов давлением. М.: 2011, №10,С 45-48]