| Issue |
Title |
File |
| Vol 5, No 2 (2011) |
Modeling of Dynamics of Vehicles Manual Transmissions System with Frictional Clutch |
(Rus)
|
|
Selifonov V.V., Nguyen Khac T.
|
| Vol 5, No 2 (2011) |
Torsional Damper Placement in Vehicle Transmission |
(Rus)
|
|
Solomatin N.S., Zotov E.M., Simonov D.V.
|
| Vol 5, No 2 (2011) |
Comparative Analysis of Power Possibilities of Autotractor Generator Rotors with Various Systems of Excitation |
(Rus)
|
|
Sugubov A.M., Chernov A.E.
|
| Vol 5, No 2 (2011) |
Model of the Electroarc Discharge for Plasma Device of Low Power |
(Rus)
|
|
Vladiyko V.B., Nazarov A.V., Eremin B.G., Martynov S.V., Andrukh O.N.
|
| Vol 5, No 2 (2011) |
Designing of Basic Components of Systems of Vehicle Electrical Supply and Start-up Considering Real Service Conditions, Event and Algorithm |
(Rus)
|
|
Akimov A.V., Chernov A.E.
|
| Vol 5, No 2 (2011) |
Hydraulic drive fan for cooling an automobile engine |
(Rus)
|
|
Trukhanov K.A.
|
| Vol 5, No 2 (2011) |
Method of improving the performance of gasoline engine work with internal mixing |
(Rus)
|
|
Fomin V.M., Platunov А.S.
|
| Vol 5, No 2 (2011) |
Development and Research of a Mathematical Model of a Four-wheel-drive Vehicle with Electric Transmission |
(Rus)
|
|
Kulakov N.A., Lepeshkin A.V., Cheranev S.V.
|
| Vol 5, No 2 (2011) |
Development of Software for Calculation of a Spatial Dimension Chain |
(Rus)
|
|
Ankin A.V., Kuzminsky D.L.
|
| Vol 5, No 2 (2011) |
Analysis of Formation of Machining Error in the Technological System of Combined Machining and Surface Plastic Deformation of Non-rigid Parts of the Hollow Cylinder Type |
(Rus)
|
|
Vetrova E.A.
|
| Vol 5, No 2 (2011) |
Studies of Microcutting Kinematics on Designing Grinding Heads to Form the Sealing Surfaces on the Parts of Pipe Fitting |
(Rus)
|
|
Gaysin S.N., Tsvik L.B., Mukhin S.V., Travin D.V.
|
| Vol 5, No 2 (2011) |
Application of nano-sized powders of carbon and chromium on the processes of charge preparation and compaction of powder steels |
(Rus)
|
|
Eremeeva Z.V., Nitkin N.M., Sharipzyanova G.K.
|
| Vol 5, No 2 (2011) |
Influence of the Surface Energy of Metallic Specimens on Strength of Adhesive Joints |
(Rus)
|
|
Zinina I.I., Pimanov M.V.
|
| Vol 5, No 2 (2011) |
Influence of Uneven Workpiece Allowance on the Output Parameters of Technological Equipment |
(Rus)
|
|
Ivannikov S.N., Shandov M.M.
|
| Vol 5, No 2 (2011) |
Process Optimization of Laser Processing in Terms of System-synergistic analysis |
(Rus)
|
|
Isakov V.V.
|
| Vol 5, No 2 (2011) |
Influence of Residual Stresses on Product Quality on Cold Forming of Sheet Workpieces |
(Rus)
|
|
Kolikov A.P., Lyutsau A.V., Lisunets N.L., Gladkov V.I., Shpunkin N.F.
|
| Vol 5, No 2 (2011) |
Simulation of Tool Contact with a Workpiece When Processing by Smoothing in the Kompas 3D Software |
(Rus)
|
|
Kuznetsov V.A., Sazonov D.A., Smirnov A.V.
|
| Vol 5, No 2 (2011) |
Registration Technique of Optical and Thermo Radiative Characteristics with Influence Compensation of Scattering Indicatrix of Heat-insulating and Thermal Barrier Materials and Coatings for Combustion Chambers of High Speed Diesel Engines |
(Rus)
|
|
Merzlikin V.G., Sutugin V.G., Stifeev L.K., Khudyakov S.V.
|
| Vol 5, No 2 (2011) |
Computer Simulation of Helical Groove Processing on the Workpiece of End-milling Cutter |
(Rus)
|
|
Petukhov Y.E., Domnin P.V.
|
| Vol 5, No 2 (2011) |
Tekhnologiya uprochneniya poverkhnosti putem sozdaniya neodnorodnoy struktury pri azotirovanii v tleyushchem razryade |
(Rus)
|
|
Ramazanov K.N., Agzamov R.D.
|
| Vol 5, No 2 (2011) |
Link of the Dendritic Structure of the Alloy Solidifying in a Two-phase Zone with Diffusion Supercooling in the Model of Cellular Two-phase Zone |
(Rus)
|
|
Sulimtsev I.I.
|
| Vol 5, No 2 (2011) |
Method for measuring small segments of cylindrical surfaces |
(Rus)
|
|
Suslin V.P., Dzhunkovsky A.V.
|
| Vol 5, No 2 (2011) |
Technology of Threading of High-length Threads |
(Rus)
|
|
Timiryazev V.A., Khostikoev M.Z., Chertov F.N.
|
| Vol 5, No 2 (2011) |
Analysis of the Mechanics of Cutting by a Cylindrical Drill with a Bridge |
(Rus)
|
|
Olenin L.D.
|
| Vol 5, No 2 (2011) |
A Numerical Solution of the Stress Concentration Problem for the Case of a Three-layered Elastic Plane with the Two Identical Vertically Placed Circular Holes under Longitudinal Tension |
(Rus)
|
|
Mikhaylova V.L., Sukhomlinov L.G., Mazin V.A.
|
| Vol 5, No 2 (2011) |
Mathematical Modeling of Cyclic Deformation |
(Rus)
|
|
Temis Y.M., Azmetov K.K.
|
| Vol 5, No 2 (2011) |
Model of Elastoplastic Material at Nonisothermal Cyclic Loading |
(Rus)
|
|
Temis Y.M., Fakeev A.I.
|
| Vol 5, No 2 (2011) |
The Problem of Classification of Political Consultants in Modern Russia |
(Rus)
|
|
Dmitriev A.E., Zhuravleva L.V., Fedorchenko S.N.
|
| Vol 5, No 2 (2011) |
The Nature of the Socio-economic System in Subcapitalist Development of Russia |
(Rus)
|
|
Filyakin J.P.
|
| Vol 5, No 2 (2011) |
Prospects of High-tech Development of the Russian Federation in Context of the Global Geopolitical Transformations |
(Rus)
|
|
Platko А.Y.
|
| Vol 5, No 2 (2011) |
The Risks of the Commercialization of Innovations |
(Rus)
|
|
Mokridin R.Y.
|
| Vol 5, No 2 (2011) |
The intangible Capital as a Competitive Advantage of an Organization |
(Rus)
|
|
Sorokina G.P., Grankina V.L.
|
| Vol 5, No 2 (2011) |
Sustainable Growth of Competitiveness as a Result of the Modernization of Russia on the Basis of Innovation |
(Rus)
|
|
Kravtsova V.I., Alenina E.E., Trishkin A.G.
|
| Vol 5, No 2 (2011) |
The Competitiveness of the Russian Automotive Industry as an Important Aspect of the Strategy of Development of the Automotive Industry in the Russian Federation |
(Rus)
|
|
Yakovenko G.V., Polyakova N.S., Volkova Y.A., Yakovenko A.G.
|
| Vol 5, No 2 (2011) |
Influence of Population Settlement Pattern of Russian Federation on the Regional Economics of the Country |
(Rus)
|
|
Kozlova A.A.
|
| Vol 5, No 2 (2011) |
Loanwords in Modern Russian |
(Rus)
|
|
Zmazneva O.A.
|
| Vol 5, No 2 (2011) |
The Information Revolution and Information Society |
(Rus)
|
|
Udovik V.E., Selyutin A.V.
|
| Vol 5, No 2 (2011) |
Analysis of the Main Problems of Formation of the Modern System of Roadside Services on the Territory of the Russian Federation |
(Rus)
|
|
Boronnikov D.A., Pervunin S.N., Yakovenko A.G.
|
| Vol 5, No 2 (2011) |
Methodological Problems in the Accuracy of Scientific Terminology |
(Rus)
|
|
Piskun A.V.
|
| Vol 5, No 2 (2011) |
Organizational Design Adaptation Strategies Aviation Industry to the Environment |
(Rus)
|
|
Kalugina G.A., Milodanova Y.A., Tikhonov A.I., Ruzakov M.A.
|
| Vol 5, No 2 (2011) |
Evaluating the Effectiveness of Investments in the Reorganization of Production |
(Rus)
|
|
Pavelyev V.P., Koltunov A.I.
|
| Vol 5, No 2 (2011) |
Monetary Problems of the Russian Economy |
(Rus)
|
|
Katanaev N.T., Larina E.V.
|
| Vol 5, No 2 (2011) |
Adaptation of the Teaching Methods of Material Science Course to Modern Conditions |
(Rus)
|
|
Volkov G.M., Manevsky S.E.
|
| Vol 5, No 2 (2011) |
Importance of Credit Norms in Student Physical Education |
(Rus)
|
|
Frolov V.G., Chernov Y.I.
|
| Vol 5, No 2 (2011) |
Integration of Research Activities of Students and the Educational Process in Order to Create an Innovative Environment at the Department of "Chemistry" |
(Rus)
|
|
Artamonova I.V., Zabenkina E.O., Rusakova S.M., Godunov E.B.
|
| Vol 5, No 2 (2011) |
New Directions of Bachelors Education on Technology of Construction Materials Department |
(Rus)
|
|
Kuznetsov V.A., Cherepahin A.A., Shlykova A.V.
|
| Vol 5, No 2 (2011) |
Integration of Russian Higher Education into European Educational Space |
(Rus)
|
|
Kochanova E.N., Kochanov N.P.
|
| Vol 5, No 2 (2011) |
Competitive Advantages of the University |
(Rus)
|
|
Chulkova O.O.
|
| Vol 5, No 2 (2011) |
The Formation of the Elements of Advanced Training of Students in Higher Education Based on an Innovative Approach |
(Rus)
|
|
Alenina E.E., Paskhina A.V.
|
| Vol 5, No 2 (2011) |
Linguistic-didactic Principles of the Intermediate Assessment to Meet the Requirements of Academic Mobility and Educational Standards of Third Generation |
(Rus)
|
|
Anokhina T.Y., Ankin A.V.
|
| Vol 5, No 2 (2011) |
Informatization of Laboratory Works in the Field of Metal Forming |
(Rus)
|
|
Voronkov V.I., Petrov P.A., Saprykin B.Y., Prokopov F.B., Taranov A.V.
|
| Vol 5, No 1 (2011) |
REShENIEMezhdunarodnoy nauchno-tekhnicheskoy konferentsii AAI «Avtomobile- i traktorostroenie v Rossii: prioritety razvitiya i podgotovka kadrov» i rasshirennogo zasedaniya Ekspertnogo soveta po voprosam avtomobil'noy promyshlennosti Komiteta po promyshlennosti Gosudarstvennoy Dumy RF |
(Rus)
|
|
- -.
|
| Vol 5, No 1 (2011) |
Research and comparative strength analysis of car wheels rims with five-and fifteen-degree coupling shelves |
(Rus)
|
|
Balabin I.V., Fomichev Y.I., Chabunin I.S., Kartashov N.S.
|
| Vol 5, No 1 (2011) |
Improvement in the method of integral force diagrams for evaluating controllability and stability of the car |
(Rus)
|
|
Bakhmutov S.V., Akhmedov A.A., Orlov A.B.
|
| Vol 5, No 1 (2011) |
Improvement of the stability of the tractor within the units with front mounting |
(Rus)
|
|
Gamaleyev P.P., Zeygerman A.S., Kursov I.V., Marshalov E.S., Ploshchadnov A.N., Yakovlev P.Y.
|
| Vol 5, No 1 (2011) |
Methods of analysis and selection of brake force distribution between axles of a biaxial vehicle |
(Rus)
|
|
Klimenko V.I., Leontyev D.N., Lomaka S.I., Ryzhikh L.A.
|
| Vol 5, No 1 (2011) |
Effect of power racks in the inter-turbine nozzle of the two-shaft gas turbine engine to uneven flow at the entrance to the power-turbine |
(Rus)
|
|
Kostyukov A.V., Plykin M.E.
|
| Vol 5, No 1 (2011) |
The research of the fracture process of positive electrodes of lead acid batteries |
(Rus)
|
|
Kochurov A.A., Kartukov A.G.
|
| Vol 5, No 1 (2011) |
Features of composite armour design |
(Rus)
|
|
Kulakov N.A., Lyubin A.N.
|
| Vol 5, No 1 (2011) |
The structure of the automatic adaptive control of multi-drive vehicle continuously variable transmission |
(Rus)
|
|
Lepeshkin A.V.
|
| Vol 5, No 1 (2011) |
Classifier of design developments in the field of transportation design |
(Rus)
|
|
Lepeshkin I.A.
|
| Vol 5, No 1 (2011) |
Plasma-chemical technology of preparation of air-fuel mixture for engine operation on various motor fuel |
(Rus)
|
|
Martynov S.V., Eremin B.G., Sitnikov A.P., Belopol A.V.
|
| Vol 5, No 1 (2011) |
Rational control laws asynchronous electric traction |
(Rus)
|
|
Nguyen Quang Thieu -., Markov V.V.
|
| Vol 5, No 1 (2011) |
Results of tests of domestic and foreign tires for small appliances |
(Rus)
|
|
Podrubalov V.K., Dmitrieva L.A., Podrubalov M.V.
|
| Vol 5, No 1 (2011) |
Influence of a leading mode wheel rolling on formation of basic surface of movement |
(Rus)
|
|
Sergeev A.I.
|
| Vol 5, No 1 (2011) |
Relation between the moments of inertia of the leading and driven parts of the composite flywheel with a torsional damper |
(Rus)
|
|
Solomatin N.S., Zotov E.M., Simonov D.V.
|
| Vol 5, No 1 (2011) |
Model stability control vehicle systems |
(Rus)
|
|
Komarov V.V.
|
| Vol 5, No 1 (2011) |
Investigation of the kinetic mechanism of nitrogen oxidation in an automotive engine with stratified mixing |
(Rus)
|
|
Fomin V.M., Platunov А.S.
|
| Vol 5, No 1 (2011) |
Gain factor of vacuum brake booster |
(Rus)
|
|
Shuklinov S.N.
|
| Vol 5, No 1 (2011) |
Organization of adaptive automatic control systems of wheeled and tracked vehicles |
(Rus)
|
|
Yagubov V.F., Shapkin A.N.
|
| Vol 5, No 1 (2011) |
Hybrid electric vehicle development with mathematical simulation software application |
(Rus)
|
|
Cheranev S.V.
|
| Vol 5, No 1 (2011) |
Features of controllable clutch operation in the energy-power unit of a hybrid vehicle |
(Rus)
|
|
Bakhmutov S.V., Krutashov A.V., Malikov O.V., Blagushko Y.I.
|
| Vol 5, No 1 (2011) |
Approximate mathematical model of the orientation of profiled joints with the use of passive adaptation and low-frequency vibrations |
(Rus)
|
|
Bozhkova L.V., Vartanov M.V., Bakena Mbua J.K.
|
| Vol 5, No 1 (2011) |
Choice of the most rational circuit of a cold profile rolling of teeth |
(Rus)
|
|
Buyanov S.S., Vinogradov V.M., Cherepakhin A.A.
|
| Vol 5, No 1 (2011) |
Drill bit manufacturing quality assurance |
(Rus)
|
|
Verzhansky A.P., Makhnenko A.N.
|
| Vol 5, No 1 (2011) |
Development of the combined treatment technology of non-ground non-ferrous metals based on implementation of no-wear effect |
(Rus)
|
|
Zinin M.A., Sergeev E.S., Gavrilov S.A., Shchedrin A.V.
|
| Vol 5, No 1 (2011) |
Methods of estimating effectiveness of safety events of potentially hazardous objects by structural analysis of the function a dangerous condition |
(Rus)
|
|
Maistruk A.A., Maistruk A.V., Rezchikov E.A.
|
| Vol 5, No 1 (2011) |
Features of modeling of specialist courses with regard to security requirements of production processes |
(Rus)
|
|
Maistruk A.V., Borkin V.S.
|
| Vol 5, No 1 (2011) |
Comparative analysis of methods for cutting process calculating (to development of analytical method for cutting processes calculating) |
(Rus)
|
|
Maksimov Y.V., Olenin L.D., Shaparovskaya M.A.
|
| Vol 5, No 1 (2011) |
Quality control on the basis of qualimetric images |
(Rus)
|
|
Martishkin V.V., Prilepina N.N., Fazlulina M.E.
|
| Vol 5, No 1 (2011) |
Disc gear cutter assemblies and coarse-grained gears machining process on CNC |
(Rus)
|
|
Ott O.S.
|
| Vol 5, No 1 (2011) |
Contact friction analysis based on extrusion of the deformed material |
(Rus)
|
|
Petrov P.A., Voronkov V.I., Petrov M.A., Nazarova O.A., Shaychulov M.V.
|
| Vol 5, No 1 (2011) |
Theoretical analysis of the process of electrochemical engraving of aerodynamic lows |
(Rus)
|
|
Saushkin G.B., Morgunov Y.A.
|
| Vol 5, No 1 (2011) |
Structural modeling and classification of methods of electrochemical machining |
(Rus)
|
|
Saushkin S.B., Morgunov Y.A.
|
| Vol 5, No 1 (2011) |
Complex geometrical control of ball bearings rings on a coordinate-measuring machine |
(Rus)
|
|
Suslin V.P., Dzhunkovsky A.V., Kholodov D.A.
|
| Vol 5, No 1 (2011) |
Automatic assessment of condition of cutting tools on multipurpose machining centers |
(Rus)
|
|
Timiryazev V.A., Khostikoev M.Z.
|
| Vol 5, No 1 (2011) |
Modeling of workpiece locating chart on machine-tools |
(Rus)
|
|
Timiryazev V.A., Novikov V.Y., Kostenko A.A.
|
| Vol 5, No 1 (2011) |
Analysis of hard-shaped cutter assemblies wear depending on the diameter and intensity of heat rejection |
(Rus)
|
|
Chulin I.V., Grechishnikov V.A.
|
| Vol 5, No 1 (2011) |
Demagnetization factor of granular magnetic material (filter array) as a channel bundle of magnetization |
(Rus)
|
|
Sandulyak A.V., Sandulyak A.A., Ershov V.A.
|
| Vol 5, No 1 (2011) |
The Hertzian problem for the ring layer of the optional thickness subject to friction forces in the contact area |
(Rus)
|
|
Bozhkova L.V., Ryabov V.G., Noritzina G.I.
|
| Vol 5, No 1 (2011) |
Supervision of new phenomena in a flow-pattern of viscous liquid |
(Rus)
|
|
Vyskrebtsov V.G.
|
| Vol 5, No 1 (2011) |
Problem versions of the theories of elastoplastic deforming of materials at composite loading |
(Rus)
|
|
Danshin V.V., Semenov P.V.
|
| Vol 5, No 1 (2011) |
The problem of the flutter of a plate of variable thickness in an improved and supplemented setting |
(Rus)
|
|
Kudryavtsev B.Y.
|
| Vol 5, No 1 (2011) |
On the issue of time speed |
(Rus)
|
|
Vyskrebtsov V.G.
|
| Vol 5, No 1 (2011) |
Information support of the restructuring process of engineering enterprise |
(Rus)
|
|
Ionov V.I., Koltunov A.I.
|
| Vol 5, No 1 (2011) |
On the issue of management of information, material and related flows of industrial enterprise |
(Rus)
|
|
Ionov V.I., Makarenko S.A.
|
| Vol 5, No 1 (2011) |
The formation process concept of the reproduction of fixed assets of Russian machine-building enterprises |
(Rus)
|
|
Ionov V.I., Kopacheva V.V.
|
| Vol 5, No 1 (2011) |
An integrated approach to building of sustainable development management under transition to a postindustrial society |
(Rus)
|
|
Platko A.Y., Dvortsova O.V., Nayanov E.A.
|
| Vol 5, No 1 (2011) |
Formation and evaluation of transparency (rating of the investment security) |
(Rus)
|
|
Rozhnova O.V., Igumnov V.M., Schastlivov A.S.
|
| Vol 5, No 1 (2011) |
Application of technology benchmarking to improve competitiveness of the tractor industry |
(Rus)
|
|
Fazlulina M.E.
|
| 1901 - 2000 of 2404 Items |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 > >>
|
