| Issue |
Title |
File |
| Vol 4, No 1-4 (2014) |
Prediction of residual life based on the results of diagnosis of full-scale constructions and continuous monitoring of their technical condition |
(Rus)
|
|
Gusev A.S., Starodubtseva S.A., Shcherbakov V.I.
|
| Vol 4, No 1-4 (2014) |
Extreme deformation of edge-fixed round steel plate under the action of a spherical punch which radius is much smaller than the radius of the plate |
(Rus)
|
|
Mikhaylova V.L., Sukhomlinov L.G.
|
| Vol 4, No 1-4 (2014) |
Comparative analysis of methods for calculating airlift units |
(Rus)
|
|
Alekseyev D.P., Sheypak A.A.
|
| Vol 8, No 4-3 (2014) |
Integrated approach to the technical condition of the process equipment |
(Rus)
|
|
Paraev S.A., Kardashev G.A.
|
| Vol 8, No 4-3 (2014) |
The elemental and fractional composition of humic substances in sediments of lakes of the taiga zone of the Tyumen region |
(Rus)
|
|
Shigabaeva G.N.
|
| Vol 8, No 4-3 (2014) |
Evaluating the effectiveness of cell selection in lawns growing in high copper content in the environment |
(Rus)
|
|
Gladkov E.A., Dolgih Y.I., Gladkova O.N., Glushetskaya L.S.
|
| Vol 8, No 4-3 (2014) |
Centers of collective use of laboratory equipment: main tasks and their realization |
(Rus)
|
|
Moiseenko V.E., Kostenko A.V., Pozdnyakov Y.O., Krysanov K.S.
|
| Vol 8, No 4-3 (2014) |
Analytical method of determining the extreme positions of special mechanisms using software systems |
(Rus)
|
|
Ivanov V.A., Korenovskiy V.V., Mamaev A.N.
|
| Vol 8, No 4-3 (2014) |
Description of multicomponent rectification based on extended principle of maximum entropy |
(Rus)
|
|
Balunov A.I., Maikov V.P.
|
| Vol 8, No 4-3 (2014) |
Preventing the formation of scaling in the water cycle |
(Rus)
|
|
Kulikov M.A., Kozlov S.G., Bulatov M.A., Zyukov E.A.
|
| Vol 8, No 4-3 (2014) |
Actual tasks intelligent lighting control |
(Rus)
|
|
Avanyan T.G., Zubov D.V., Paramonov E.A.
|
| Vol 8, No 3-3 (2014) |
Determination of flow behavior index of polymer compositions |
(Rus)
|
|
Noskov S.A., Baranov D.A., Skopintsev I.V.
|
| Vol 8, No 3-3 (2014) |
Method for determination of kinetic parameters of oxidation of ground carbon materials |
(Rus)
|
|
Obvintseva N.Y., Kaminskiy A.V., Epshteyn S.A.
|
| Vol 8, No 3-3 (2014) |
E-learning systemfor teaching the management of hard alloy producing |
(Rus)
|
|
Kornienko I.G., Chistyakova T.B., Novozhylova I.V.
|
| Vol 8, No 3-3 (2014) |
Mathematical modeling of regeneration of granular filter material from petroleum |
(Rus)
|
|
Ivanova A.A., Stanislavskaya Y.S., Bulatov M.A., Haddad J.
|
| Vol 8, No 3-3 (2014) |
Mathematical modeling of measuring transducers |
(Rus)
|
|
Golovin V.V., Latyshenko K.P.
|
| Vol 8, No 3-3 (2014) |
Induction of carotenogenesis in the yeast of Phaffia rhodozyma strain Y2228 in formation of singlet oxygen in culture medium under the action of hydrogen peroxide |
(Rus)
|
|
Melnikova E.V., German L.S., Kramm E.A.
|
| Vol 8, No 3-3 (2014) |
Direction of modification of components for pyrotechnic low-gas compositions |
(Rus)
|
|
Romanov P.S., Burdikova T.V., Pavlovets G.Y., Meleshko V.Y., Romanova I.P., Tikhomirova M.A.
|
| Vol 8, No 3-3 (2014) |
Methodology for determination of mass fraction of active substance in ultraand nano-dispersed metal fuels by combustion calorimetry |
(Rus)
|
|
Romanov P.S., Pavlovets G.Y., Meleshko V.Y., Romanova I.P., Zlatkina V.L., Kulikova T.L., Mikhaylovskaya L.A.
|
| Vol 8, No 3-3 (2014) |
Influence of salinity on bioconcentration and genotoxicityof heavy metals for Asteria srubens L. sea stars |
(Rus)
|
|
Poromov A.A., Peretykin A.A., Smurov A.V.
|
| Vol 8, No 3-3 (2014) |
Influence of velocity on separation efficiency of drops under partial condensation of vapor on tube bundle |
(Rus)
|
|
Zhikharev A.S., Mantrova Y.S.
|
| Vol 8, No 3-3 (2014) |
Working substances of high heat pumps. Current state of affair and development trends |
(Rus)
|
|
Malafeev I.I., Ilyin G.A., Krysanov K.S.
|
| Vol 8, No 3-3 (2014) |
New fields of application of regenerative cooling-gas machines |
(Rus)
|
|
Porytchikov A.F., Krysanov K.S.
|
| Vol 8, No 3-3 (2014) |
Process of production Аgrostis stolonifera l. plants, resistant to high concentrations of lead via cell engineering |
(Rus)
|
|
Gladkov E.A., Gladkova O.N., Glushetskaya L.S., Dolgikh Y.I.
|
| Vol 8, No 3-3 (2014) |
Production management model on the principles of environmental safety and results of its testing |
(Rus)
|
|
Grafkina M.V., Stolbniakova E.E.
|
| Vol 8, No 3-3 (2014) |
Universal algorithm of preparation of soil samples for determination of hazardous chemicals |
(Rus)
|
|
Latyshenko K.P., Mironov A.A., Pavluchenko I.A.
|
| Vol 8, No 3-3 (2014) |
Heat and mass transfer tests of minicircular nozzles of polymeric material |
(Rus)
|
|
Sokolov A.S., Pushnov A.S., Sidelnikov I.I., Tolstikov A.V., Kurbatova E.A.
|
| Vol 8, No 3-3 (2014) |
Optimization of production of carbon black by using idealized model of the reactor |
(Rus)
|
|
Borovkov A.D., Tsygankov M.P.
|
| Vol 8, No 3-3 (2014) |
Performance test results of mass transfer mesh combined contact device |
(Rus)
|
|
Trifonov V.V., Sidel'nikov I.I.
|
| Vol 8, No 3-3 (2014) |
Information system for calculating medical risk factors |
(Rus)
|
|
Safariants D.S., Sofiev A.E.
|
| Vol 8, No 3-3 (2014) |
Stabilization system for illumination of the working area |
(Rus)
|
|
Paramonov E.A., Zubov D.V., Nevrov A.Y.
|
| Vol 8, No 2-3 (2014) |
Study of energy parameters of abiotic environment in near-field low-frequency electromagnetic field source zone |
(Rus)
|
|
Grafkina M.V., Nyunin B.N., Sviridova E.Y.
|
| Vol 8, No 2-3 (2014) |
Study of pump separator for gas-liquid mixture for sanitary compartment of space station |
(Rus)
|
|
Salnikov N.A., Bobe L.S., Nikolaykina N.E., Rykhlov N.V.
|
| Vol 8, No 2-3 (2014) |
Influence of traffic emission on distribution of heavy metals and benzo(α)pyrene in water of recreational areas |
(Rus)
|
|
Sorokin A.V., Sotnikova E.V.
|
| Vol 8, No 2-3 (2014) |
Energy efficiency of plastic waste recycling into hydrogen and other hydrocarbon production |
(Rus)
|
|
Latyshenko K.P., Garelina S.A.
|
| Vol 8, No 2-3 (2014) |
Experimental study of plastics hardness |
(Rus)
|
|
Frolov V.N., Shcherbakov Y.M., Skachkov Y.A.
|
| Vol 8, No 2-3 (2014) |
Environmental aspects of commercial transport transfer to higher fuel standards in Moscow |
(Rus)
|
|
Grafkina M.V., Sotnikova E.V., Sviridova E.Y., Shirokova A.N., Fedorina A.I.
|
| Vol 8, No 2-3 (2014) |
Interference-suppressed contact conductivity meter with pulse contact transducer |
(Rus)
|
|
Golovin V.V., Latyshenko K.P.
|
| Vol 8, No 2-3 (2014) |
Use of magnetic field effects to determine position of drilling tool for installation of underground utilities |
(Rus)
|
|
Babushkin V.V.
|
| Vol 8, No 2-3 (2014) |
Processes of minimal dissipation in thermodynamic and economic systems |
(Rus)
|
|
Tsyrlin A.M.
|
| Vol 8, No 2-3 (2014) |
Correlation analysis of heavy metals in sediments |
(Rus)
|
|
Shigabaeva G.N., Akhtyrskaya E.O.
|
| Vol 8, No 2-3 (2014) |
Development of information technology and computer quality management for inorganic acids of high purity |
(Rus)
|
|
Bessarabov A.M., Trynkina L.V., Kazakov A.A., Trokhin V.E.
|
| Vol 8, No 2-3 (2014) |
Algorithm for determination of illumination intensity of solar panels of the Russian segment of the International Space Station |
(Rus)
|
|
Sazonov V.V.
|
| Vol 8, No 2-3 (2014) |
Research of sludge respiratory activity of various biological treatment process |
(Rus)
|
|
Verigina E.L., Grachev V.A., Selivanonv A.V.
|
| Vol 8, No 2-3 (2014) |
Wastewater treatment of oil products at car parks |
(Rus)
|
|
Sister V.G., Mitashova N.I., Koltsova E.S.
|
| Vol 8, No 2-3 (2014) |
Development of criteria for comparative analysis of chemical and petrochemical industries of Russia |
(Rus)
|
|
Kvasyuk A.V., Bessarabov A.M., Bel’kov V.P., Zubov D.V.
|
| Vol 8, No 2-3 (2014) |
Mixing devices with a complex law of agitators motion |
(Rus)
|
|
Torubarov N.N., Malyshev R.M.
|
| Vol 8, No 2-3 (2014) |
Determination of values of the solution flow rate and temperature in carbon dioxide absorption process |
(Rus)
|
|
Gureev A.O., Pikulin Y.G.
|
| Vol 8, No 2-3 (2014) |
Determination of optimal conditions for technology main waste processing titanium production |
(Rus)
|
|
Barsukov A.V., Vacal S.V., Karpovich E.A.
|
| Vol 8, No 2-3 (2014) |
Isolation of butanol from an aqueous solution |
(Rus)
|
|
Gharibyan T.S.
|
| Vol 8, No 2-3 (2014) |
Calculation of thermal regimes and forecasting of the molds for plastic injection molding |
(Rus)
|
|
Zyukov E.A., Bulatov M.A., Duvidzon V.G.
|
| Vol 8, No 2-3 (2014) |
Use of thin clients for operational planning process |
(Rus)
|
|
Vasiliev A.A., Zubov D.V., Krysanov P.K.
|
| Vol 8, No 1-3 (2014) |
Use of flocculants to improve environmental safety of water circuit of coal preparation plants |
(Rus)
|
|
Konovalova T.A., Veksler G.B., Lavrinenko A.A., Golberg G.Y.
|
| Vol 8, No 1-3 (2014) |
Plasma-chemical reactor for production of hydrogen from polymer waste |
(Rus)
|
|
Latyshenko K.P., Garelina S.A.
|
| Vol 8, No 1-3 (2014) |
Steam separation by partial condensation on tube bundle with a minimum degree of condensation |
(Rus)
|
|
Zhikharev A.S.
|
| Vol 8, No 1-3 (2014) |
Method of intracyclic regulation of kinematic parameters of a linkage mechanism |
(Rus)
|
|
Ivanov V.A., Brovkina Y.I.
|
| Vol 8, No 1-3 (2014) |
Method of plastics endurance testing |
(Rus)
|
|
Shcherbakov Y.M., Frolov V.N.
|
| Vol 8, No 1-3 (2014) |
Preparation of multilayer food packaging waste for processing to secondary materials |
(Rus)
|
|
Nikolaykina N.E., Mayusan O.Y., Salnikov N.A.
|
| Vol 8, No 1-3 (2014) |
Use of potential of negative temperatures of ambient air in cold-storage systems |
(Rus)
|
|
Marinyuk B.T., Serenov I.I., Ugolnikova M.A.
|
| Vol 8, No 1-3 (2014) |
Treatment of body painting wastewater at automotive plant |
(Rus)
|
|
Sister V.G., Mitashova N.I., Rogacheva V.V., Bashkatova I.A.
|
| Vol 8, No 1-3 (2014) |
Computer analysis of unsteady creeping of construction rod elements |
(Rus)
|
|
Lugantsev L.D.
|
| Vol 8, No 1-3 (2014) |
Improving of motor vehicles performance through use of high-performance additives |
(Rus)
|
|
Zarubin V.P., Kiselev V.V., Puchkov P.V., Toporov A.V.
|
| Vol 8, No 1-3 (2014) |
Development of new lubricate compositions increasing reliability of firefighting equipment |
(Rus)
|
|
Kiselev V.V., Zarubin V.P., Nikitina S.A., Pokrovskiy A.A.
|
| Vol 8, No 1-3 (2014) |
Determination of quality of wastewater containing surfactants |
(Rus)
|
|
Volkov V.A., Mitashova N.I., Ageev A.A.
|
| Vol 8, No 1-3 (2014) |
Traffic jams in conditions of megapolis |
(Rus)
|
|
Vladimirov S.N.
|
| Vol 8, No 1-3 (2014) |
Features of metrological support for photocolorimetric gas analyzers |
(Rus)
|
|
Sviryukova O.V.
|
| Vol 8, No 1-3 (2014) |
Development and investigation of refrigerating machine with dosage filling ammonia |
(Rus)
|
|
Krivtsov D.V., Porutchikov A.F.
|
| Vol 8, No 1-3 (2014) |
Study of changes in properties of urban waste water sediments at natural drying sites |
(Rus)
|
|
Verigina E.L.
|
| Vol 8, No 1-3 (2014) |
Change of running efficiency of chemical equipment during operation |
(Rus)
|
|
Toporov A.A., Parfenyuk A.S.
|
| Vol 8, No 1-3 (2014) |
Effect of atmosphere composition changes on working conditions |
(Rus)
|
|
Kudgh S.A., Trubitsin A.V., Kotel’nikov S.N.
|
| Vol 8, No 4-2 (2014) |
Research of distribution of plastic deformation on thickness of steel strips |
(Rus)
|
|
Aldunin A.V., Shumeev A.V.
|
| Vol 8, No 4-2 (2014) |
Counting approaches to determination of force function argument |
(Rus)
|
|
Maximov Y.V., Ankin A.V., Chebyshev A.I.
|
| Vol 8, No 4-2 (2014) |
Influence of change of speed of deformation on nature of hardening of material |
(Rus)
|
|
Kiselyov D.O., Tipalin S.A., Shpunkin N.F., Tipalina A.V.
|
| Vol 8, No 4-2 (2014) |
Improvement of technology of manufacturing "body pump" parts of EPAN composite material reinforced by nanoscale carbon fibers |
(Rus)
|
|
Kostikov V.I., Eremeeva Z.V., Nitkin N.M., Sharipzyanova G.H., Slyuta D.N.
|
| Vol 8, No 4-2 (2014) |
Determination of optimal method of making of small diameter deep holes in parts of gas-turbine engine and its experimental study |
(Rus)
|
|
Kratyuk N.A.
|
| Vol 8, No 4-2 (2014) |
Wear-resistant coatings and their use for improvement of cutting tool performance |
(Rus)
|
|
Maximov E.I.
|
| Vol 8, No 4-2 (2014) |
Structure and wear resistance of carbide-containing multilayer coating after oxyacetylene welding |
(Rus)
|
|
Parkin A.A., Zhatkin S.S., Minakov E.A., Semin A.B.
|
| Vol 8, No 4-2 (2014) |
Machining of square seats in thrust bearings separators for helicopters using CNC machine |
(Rus)
|
|
Pini B.E., Popov A.V.
|
| Vol 8, No 3-2 (2014) |
Kinematic analysis of cam-gear-lever mechanism with elastic element in connecting rod |
(Rus)
|
|
Balabina T.A., Mamaev A.N.
|
| Vol 8, No 3-2 (2014) |
Fractal analysis of surface profile of machine parts using measuring device MarSurf XR20 |
(Rus)
|
|
Bavykin O.B., Plaksin S.V., Vycheslavova O.F.
|
| Vol 8, No 3-2 (2014) |
Study of stress-strain state of mill roller drive elements |
(Rus)
|
|
Ivochkin M.Y., Gurevich Y.Y., Dimitryuk S.O.
|
| Vol 8, No 3-2 (2014) |
Natural-model tests of materials and coatings in simulated intense radiant and convective heat transfer of elements of heat and power equipment. Part 2: Physical and technical characteristics of thermal stand for testing of materials and coatings of diesel engine thermally insulated combustion chamber |
(Rus)
|
|
Merzlikin V.G., Maximov A.D., Tovstonog V.A., Chirin K.V., Abdulmyanov R.N.
|
| Vol 8, No 3-2 (2014) |
Features of high-speed milling machining |
(Rus)
|
|
Olenin L.D., Ochkin D.I.
|
| Vol 8, No 2-2 (2014) |
Influence of modes of diamond grinding on cutting forces during machining of structural ceramics |
(Rus)
|
|
Alexeev S.V.
|
| Vol 8, No 2-2 (2014) |
Increase of functional reliability of hydraulic actuator of load-lifting devices |
(Rus)
|
|
Bekaev A.A., Maximov Y.V., Strokov P.I., Musakova T.V., Paponov A.V.
|
| Vol 8, No 2-2 (2014) |
Comparative studies of air-plasma and oxygen-plasma cutting |
(Rus)
|
|
Vasiliev A.N., Vnuk V.V., Zinoviev V.I., Kotkina T.V.
|
| Vol 8, No 2-2 (2014) |
Dependence of surface roughness from workpiece material and device structural parameters for combined cutting and surface plastic deformation in processing of non-rigid parts of hollow cylinder type |
(Rus)
|
|
Vetrova E.A., Lebedev P.A., Adeev A.S.
|
| Vol 8, No 2-2 (2014) |
Improvement of cylindrical spur gears wear resistance |
(Rus)
|
|
Gorlenko O.A., Makarov G.N.
|
| Vol 8, No 2-2 (2014) |
Design of geometrically-complex tools based on Boolean algebra |
(Rus)
|
|
Emelianov P.I., Maximov Y.V.
|
| Vol 8, No 2-2 (2014) |
Features of metal matrix composite material hardening with implementation of small amounts of nano-sized reinforcing additives |
(Rus)
|
|
Eremeeva Z.V., Lopatin V.Y., Simonova E.V.
|
| Vol 8, No 2-2 (2014) |
Improvement of multi-dimensional processing efficiency by layout optimization of multi-axis machine tools |
(Rus)
|
|
Lukina S.V., Ivannikov S.N., Manaenkov I.V.
|
| Vol 8, No 2-2 (2014) |
Contactless copying H2C interface for controlling an anthropomorphic robot |
(Rus)
|
|
Idiatullov T.T., Romantsov N.A., Chabanenko E.B.
|
| Vol 8, No 2-2 (2014) |
Development of flow forming cutting of cylindrical wheels |
(Rus)
|
|
Kalashnikov A.S., Morgunov Y.A., Kalashnikov P.A., Kotkina T.V.
|
| Vol 8, No 2-2 (2014) |
Peculiarities of broaching holes using tool with regular microrelief |
(Rus)
|
|
Koltunov I.I., Lobanov A.S.
|
| Vol 8, No 2-2 (2014) |
Modern technologies in educational process and production |
(Rus)
|
|
Maximov Y.V., Kuzminsky D.L.
|
| Vol 8, No 2-2 (2014) |
Directed surface plastic deformation in the system of control of pneumatic hydro-aggregates precision part shape |
(Rus)
|
|
Kuritsyna V.V., Martynyuk A.V., Grachev M.V.
|
| Vol 8, No 2-2 (2014) |
Full-scale-model tests of materials and coatings at simulation of intense radiation and convective heat transfer of heat power equipment elements |
(Rus)
|
|
Merzlikin V.G., Maximov A.D., Tovstonog V.A., Krokhalev I.N.
|
| Vol 8, No 2-2 (2014) |
Hardening of chromium steels in vacuum |
(Rus)
|
|
Ovsyannikov B.L., Vasilevsky V.V., Kulomzin E.K.
|
| Vol 8, No 2-2 (2014) |
Influence of carbide phase distribution on deterioration of composite coating WOKA PTA-6040 after plasma powder surfacing |
(Rus)
|
|
Parkin A.A., Zhatkin S.S., Minakov E.A.
|
| Vol 8, No 2-2 (2014) |
Optimization of combined cutting and surface plastic deformation |
(Rus)
|
|
Pini B.E., Vetrova E.A., Maximov Y.V.
|
| 801 - 900 of 2404 Items |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 > >>
|
