Search

Issue
Title
Authors
Development of an algorithm for controlling the suspension of a heavy-duty vehicle using the technology of systems embedding
Verkner A.S.
Mathematical model of the hovercraft lift system
Lepeshkin A.V., Sosnovsky N.G., Nguyen V.H.
Mathematical model creation for the lithium-ion battery and its comparing with analogs
Barsegyan K.R., Perepeliza M.A., Onishchenko D.O.
Modeling the work of the automotive differential with internal friction in the system for calculating the multi body dynamics
Chichekin I.V., Shuranova A.A.
Mathematical Model of Vehicle Motion as a Multimass System
Bakhmutov S.V., Gusakov D.N.
Accuracy Enhancement for Vehicle Motion Mathematical Model on the Basis of Test Results
Kurmaev R.K., Lepeshkin A.V.
MATHEMATICAL MODELING OF HYDRAULIC DRIVE OF A FAN FOR AUTOMOTIVE ENGINE COOLING SYSTEM
Trukhanov K.A.
The study of KAMAZ-4308 acceleration with single-threaded and dual-threaded clutch in transmission
Gorbatovskiy A.V., Kotiyev G.O., Chulyukin A.O.
Model of the dynamics of a wheeled vehicle for a complex of full-scale-mathematical modeling
Kositsyn B.B.
Electromechanical system for providing continuity summing power to the driving machine when shifting gears in transmission of a vehicle
Gorbatovskiy A.V., Kotiev G.O., Chulyukin A.O.
DEPENDANCE OF GRINDING ACCURACY FROM PARAMETERS OF SET-UP
Koltunov I.I., Lobanov A.S.
Model of the Electroarc Discharge for Plasma Device of Low Power
Vladiyko V.B., Nazarov A.V., Eremin B.G., Martynov S.V., Andrukh O.N.
Improvement of Geometrical Parameters of Surface Quality in Process of Broaching on the Basis of Modernization of Cutting Tool Design
Bekayev A.A., Shchedrin A.V., Skoromnov V.M.
Theoretical research bioethanol ICE operating process
Lavrov S.V., Apelinskiy D.V.
The choice of the rational design of the mobile robot mover for urban environment
Tsipilev A.A., Smirnov I.A.
COMPARATIVE EVALUATION OF THE ERROR IN GRINDING OF BEARING RINGS
Koltunov I.I.
Mathematical model of electric discharge machining and processing management tasks
Ovsyannikov B.L.
The problem of correlation of cornering characteristics of tires in test bench tests
Bernadskiy V.V., Krasavin P.A., Kruglov S.M., Melo O.H.
Methods of automated synthesis of innovative management solutions
Lukina S.V., Girko V.V.
Mathematical methods for the analysis of migration processes on the basis of demographic data
Butusov O.B., Nikiforova O.P., Redikultseva N.I.
Evaluation of ability to regenerate oscillation energy by the suspension system of a two-axle truck
Malikov R.R., Smirnov A.A., Klimov A.V.
Analysis of the Mechanics of Cutting by a Cylindrical Drill with a Bridge
Olenin L.D.
On the question of influence of geometrical perfection parameters of the surface of the workpiece
Bekaev A.A., Kouznetsov V.A., Schedrin A.V., Skoromnov V.M.
Self-excitation of oscillations of wheeled tractors frame when working in traction mode
Schetinin Y.S., Esenoskiy-Lashkov M.Y., Sergeev A.I.
Parametric synthesis of the optimal regulator on the basis of the calculus of variations for General mathematical model of the object
Polianskiy V.P.
The use of hydraulic communication channel in technical systems
Trukhanov K.A.
USE OF FORMAL METHODS TO OBTAIN THE MATHEMATICAL MODEL OF AN OSCILLATORY SYSTEM
Shchetinin Y.S.
Integrated assessment of power distribution law influence on operating characteristics of allwheel drive vehicle
Bakhmutov S.V., Gusakov D.N.
Mathematical Model of Road Complex Risk Assessment
Komarov V.V., Kuklev E.A.
Strength analysis of the frame of the unit for long loads when modifying the geometry of its elements
Mishin P.P., Osipov N.L., Kramskoy N.A.
The Hypothesis about the calculation of cutting forces accuracy. Designing of mathematical model
Volkov A.V., Matveev S.V.
Hardening of chromium steels in vacuum
Ovsyannikov B.L., Vasilevsky V.V., Kulomzin E.K.
Construction of a one-parameter stochastic model of the production process
Mordasov Y.P.
Analysis of design schemes of combination of vehicles towing elements wheel drives
Gorelov V.A., Chudakov O.I.
The Mathematics Model of Mechanism Forming the Spot Face of Rolling Wheel
Sergeev A.I., Cherny I.V.
Analytical method of estimating the results of interaction of elastic wheel with deformable bearing surface in the sustained straight rolling motion
Lepeshkin A.V., Petrov S.E.
The Hypothesis about the calculation of cutting forces accuracy. Cutting parameters. Designing of mathematical model
Volkov A.V., Matveev S.V.
Building of crawler transporters of extra light weight category on the basis of units and components of automobiles
Gmyrya N.G., Sharipov V.M., Schetinin Y.S., Denisov A.V., Marinkin A.P., Baulina E.E.
Optimization of production of carbon black by using idealized model of the reactor
Borovkov A.D., Tsygankov M.P.
A mathematical model of treelike actuator of a walking robot considering imposed links
Kovalchuk A.K., Yarots V.V.
Problems of process control for shifting gears on tractors without torque interruption
Timofievskiy A.A.
Capability Check of the Cutting Tool by Method of Final Elements
Mihaylov V.A., Ivannikov S.N., Mokrinskaya A.Y.
Computational study on the influence of dimethyl ether additive in methane/air mixture as an alternative fuel on the combustion process of HCCI engine
Mahmoud Mohamed El-Ghobashy El-Hagar -.
Development of a mathematical model of an energy-absorbing seat, using the results of piling tests
Kulakov N.A., Gavrilov E.V.
Transients in hydraulic drive of a fan for engine cooling system of a vehicle
Trukhanov K.A.
Estimation of traction and dynamic properties of an 8×8 car with individual wheel drives on a chassis dynamometer
Kotiev G.O., Gorelov V.A., Zakharov A.Y.
Methods of determining the volume of industrial jobs in the plan period
Mordasov U.P.
The study of “real-time” simulation of planar curvilinear motion of six-wheel drive vehicle
Buzunov N.V.
Evaluation of indicators of curvilinear movement of a road train using mathematical simulation
Gorelov V.A., Yevseyev K.B., Chudakov O.I., Balkovskiy K.S.
Оscillations under cutting-deforming flexible shafts work
Maximov Y.V., Ankin A.V.
Mathematical Model of Rolling Elastic Wheel over Deformable Ground
Chistov M.P., Naumov A.N.
Generalized mathematical model of vibration load of mobile machines with random kinematical excitation
Podrubalov V.K., Nikitenko A.N., Podrubalov M.V.
The mathematical model for calculating the thickness distribution of the metal in stamping in multisection dies with rotating discs
Korobko T.B., Kozachishena E.S.
Control of dynamics of tractor with electronic gearshift control
Timofievskiy A.A.
Mathematical model for assessing the influence of a coupled suspension system on the smooth running of a tracked vehicle
Sarach E.B., Cipilev A.A., Kurasova M.S.
Simulation Point-drop Processes with Assembly Error of Thermal Heater Connection
Tolokonnikov S.V.
Propulsion of Logging Machines with Individual Electromechanical Wheel Drives of Rolling Over Type
Sergeev A.I.
Multicriteria Parameter Optimization in the Tasks of Improving Handling Characteristics and Stability of Vehicles
Bakhmutov S.V., Akhmedov A.A.
Methods of comparative evaluation of cost and quality of innovative solutions in the project life cycle of high-tech products of mechanical engineering production
Lukina S.V., Krutyakova M.V., Solovieva N.S., Girko V.V.
Digital PID controller for pneumatic and hydraulic systems
Truhanov K.A.
1 - 60 of 60 Items

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies