Search

Issue
Title
Authors
Experimental studies of the effect of a hybrid inverter on power quality
Shklyarskiy Y.E., Skam'in A.N., Vasil'kov O.S.
Quality management of technical products in the development stage of working documents
Martishkin V.V.
Formation of a system of quality assessment of vocational education institutions by consumers
Andrukh O.N., Sidorova A.S., Chaduneli M.K.
QUALITY MANAGEMENT OF TECHNICAL PRODUCTS ON THE STAGES OF DEVELOPMENT
Martishkin V.V.
Finding the base for the calculation of quality products at the design stage of working documents
Martishkin V.V.
Quality management of technical products at the stage of technical projec
Martishkin V.V.
Development trends in the development of quality management systems in education
Shamgunova A.D.
Formation of the range of university teachers quality indicators on the basis of systematic approach
Andrukh O.N., Sidorova A.S.
Optimization of the quality of production from the positions of economic production efficiency
Kopilov L.V., Dmitriev Y.M., Petukhov S.L.
Influence of Operation and Assembly Interaction of Pipe Valves on Their Quality Rating
Semenov A.N., Naumova S.A.
Mathematical methods for monitoring the quality of education
Amelkin S.A., Egorychev A.A.
Cutting quality and accuracy parameters of billet at the cutting process in the dies by rotary tool
Kokorin V.N., Filimonov V.I., Zemskova A.N.
Integration of Russian Higher Education into European Educational Space
Kochanova E.N., Kochanov N.P.
Control of Machinery Quality Parameter Inheritance during restoration, working, assembly and operation of machinery
Heyfets M.L., Lysov A.A., Kusakin N.A., Prement G.B.
Improvement of the stability of the tractor within the units with front mounting
Gamaleyev P.P., Zeygerman A.S., Kursov I.V., Marshalov E.S., Ploshchadnov A.N., Yakovlev P.Y.
Vehicle Longitudinal Motion Simulation by Analytical Automatic Machines
Lepeshkin A.V., Katanaev N.K., Dragunov S.S.
Developing of a model of quality parameters of rolling bearings
Koltunov I.I., Lobanov A.S.
Ensuring the quality of the surface layer and the reduction of process costs when machining R.N. Akinshin
Akinshin R.N.
Automated control-test stand for study of automobile and bus generator sets
Chernov A.E., Akimov A.V.
Theoretical aspects of polymer coatings formation from elastomer solutions when infrared drying
Li R.I., Safonov V.N.
Experimental study of polymer coatings quality of tractor and automobiles body parts from the elastomer F-40 solution with infrared drying
Li R.I., Safronov V.N.
ANALYSIS OF MUTUAL COMPATIBILITY OF GEOMETRICAL AND PHYSICAL-MECHANICAL CHARACTERISTICS OF THE SURFACE LAYER OF TITANIUM ALLOY PRODUCTS AFTER ULTRASONIC MACHINING
Taratynov O.V., Kharchenko V.V., Korneev D.V.
Support of Thermal Heater Connection Assembling Quality
Dmitriev A.V., Ryltsev I.K.
Ignition Systems with Automatic Control of the Quality of Fuel Combustion in the Cylinders of Combustion Engines
Melnikov A.A.
The turrets lathes with additional drive of rotation axial tools
Pini B.E., Maksimov Y.V., Lebedev P.A.
Multilevel integrated quality management system for electrical equipment at automobile lifecycle stages
Pimkina E.S., Kozlovskiy V.N., Maleyev R.A.
Mathematical model of the top-N problem for content recommender systems
Amelkin S.A., Ponizovkin D.M.
Statistical business process management - the key to success of a modern industrial enterprise
Loktev D.A.
Comparative studies of air-plasma and oxygen-plasma cutting
Vasiliev A.N., Vnuk V.V., Zinoviev V.I., Kotkina T.V.
On the question of increasing the international competitiveness of Russian universities
Shiriaev D.V.
Optimization of transient processes of the pneumatic servo drive taking into account the friction model with the Stribeck effect
Kireyeva V.A., Trukhanov K.A.
Optimization of individual selection for multiselection dimensional chains
Nepomiluyev V.V., Mayorova E.A.
About a role normative and technical documentation in formation of competence of automobile engineers
Andrukh O.N.
PUBLIC-PRIVATE PARTNERSHIP AND THE QUALITY IMPERATIVE OF TRANSPORT INFRASTRUCTURE
LEVITIN I.E., MAYBORODA V.P.
Estimation of efficiency of internal combustion engine in terms of quality index of system operation
Grabovskiy A.A.
Functionally-oriented technologies of working surfaces treatment for automotive parts
Suslov A.G.
Development of information technology and computer quality management for inorganic acids of high purity
Bessarabov A.M., Trynkina L.V., Kazakov A.A., Trokhin V.E.
The quality of training engineering students in computer science, as a factor in improving the competitiveness of college
Fomina A.C.
MANAGEMENT TECHNOLOGY FOR DEVELOPMENT OF A SYSTEM FOR EVALUATION OF THE QUALITY OF EDUCATIONAL PROCESS AT UNIVERSITY
Belova S.N.
Quality control on the basis of qualimetric images
Martishkin V.V., Prilepina N.N., Fazlulina M.E.
Technological Quality Assurance of Assembling
Medar A.V.
Problems of the competitiveness estimation of motor industry products
Sorokina G.P., Sotnikov A.S., Zakharov A.V.
Analysis of measuring errors and an object in determining residual stresses
Yakovlev M.G.
Health status of workers in relation to the environment
Kudrov A.N.
Innovative technologies in mechanical engineering
Zadornova N.A.
Optimization of suspension system of high-speed tracked vehicles
Savochkin V.A., Sharipov V.M., Smirnova I.A., Shishanov S.M.
Teaching of hydraulics in technical universities
Lepeshkin A.V., Mikhaylin A.A.
Modern trends of analysis for the management of financial stability of the organization in a volatile competitive external environment
Redin D.V.
PROBLEMS OF QUALITY OF INNOVATION PROJECTS
Kamenetsky V.A., Alenina E.E., Volosatova V.V.
Development of the combined treatment technology of non-ground non-ferrous metals based on implementation of no-wear effect
Zinin M.A., Sergeev E.S., Gavrilov S.A., Shchedrin A.V.
Diagnosability Provision of Screw Joint Assembly Operations
Lanshchikov A.V., Seliverstov A.A.
Effectiveness increase of burnishing and mixed processing by the variation of tool location method
Kouznetsov V.A., Shestavin P.V.
Importance of simplicial sets in quality management of technical products
Martishkin V.V., Fazlulin E.M.
Statistical modeling of the output parameters in process of machining of ceramic composite materials with using bound-abrasive
Bakharev V.P., Knutova E.E.
Environmentally friendly gas-dynamic surface treatment in order to improve surface quality
Chekalova E.A., Chekalov P.D.
Calculation of the integral index of competitiveness of industrial production in Russia
Alenina E.E., Paskhina A.V.
Piston workpieces produced by casting with crystallization under pressure
Batyshev A.I., Batyshev K.A., Smolkin A.A., Bezpalko V.I.
Quality rating and effectiveness of technology platforms as a tool of coordinating the participants of an innovation process
Rayzberg B.A., Zheltonozhko T.A.
FORMATION OF THE MARKET FOR AUTOMOTIVE COMPONENTS AND STEPS NEEDED TO CREATE COMPETITIVE SUPPLIERS
Drynochkin A.V., Alenina E.E., Gontar M.M.
Quality and reliability of systems of an electrical supply of independent objects
Chernov A.E., Akimov A.V.
Refinement of education level through improving of correlation between theoretical and practical classes
Tipalin S.A., Tipalina A.V., Afanasyeva N.I.
Improvement of Geometrical Parameters of Surface Quality in Process of Broaching on the Basis of Modernization of Cutting Tool Design
Bekayev A.A., Shchedrin A.V., Skoromnov V.M.
Precision of machining on CNC machines
Maksimov Y.V., Bekayev A.A., Nadolskiy M.A., Prokhorov A.V.
Development of smart electricity distribution networks
Evlashin S.A., Merzin V.E., Savelyev I.L.
Development of CALS-system for quality management of impregnating compositions for road pavements
Glushko A.N., Bessarabov A.M.
Quality model of stable catalyzate on the unit of catalytic reforming of gasoline
Sofiev A.E., Rylov M.A.
Development of customer feedback systems in management of quality and reliability of cars during operation
Kozlovskiy V.N., Maleev R.A., Polyakova E.V., Korotkov V.I.
Improvement of quality of processing of applications of citizens and organizations to the federal bodies of state power
Barykin D.V., Boronnikov D.A., Fedulova Z.M., Samokhin I.E., Morozov S.V.
Obtaining of non-linear regression equations with parabolic optimization
Ivashnev L.I.
Preparation of a Modern Specialist in Higher Vocational Education
Eremeeva L.V.
Ultrasound Application for Assembly Quality assurance
Shuvaev V.G.
Generating of quality management systems within the general management control system in the field of higher education
Lartseva T.A.
The determination of influence of applied lubricant on the physical-mechanical properties of bore surface layer
Buylov E.A.
Methods of comparative evaluation of cost and quality of innovative solutions in the project life cycle of high-tech products of mechanical engineering production
Lukina S.V., Krutyakova M.V., Solovieva N.S., Girko V.V.
Computer management of the quality of anti-icing materials for highways
Bessarabov A.M., Glushko A.N., Stepanova T.I., Gordeeva E.L.
Remedy defects in the production of thin sheet profile at multi-roll forming bands
Kolesov A.V., Kiselev D.O.
Complex of analytical tools for assessment of effectiveness of measures aimed at automobile reliability improvement
Kozlovskiy V.N., Maleev R.A., Panyukov D.I., Kudinova L.A.
Assessing the impact of parameters of a high-speed tracked vehicle suspension on its driving speed
Smirnov I.A., Sharipov V.M., Shishanov S.M., Platonov V.F.
Statistics educational potential
Korgenevskaya E.I.
Expert subjectivism accounting method at quality estimation
Martishkin V.V., Prilepina N.N.
Advance Estimation of Quality and Competitiveness of Products in Flexible Automatic Assembly
Shabaykovich V.A.
Training of mechanical engineers to improve the quality of Russian cars
Karunin A.L., Zaitsev S.A., Gribanov D.D.
Technological Measures to Improve Automotive Product Quality
Gladkov V.I., Kruglov S.M.
Application of laser welding technology in manufacture of pressure vessels of titanium alloy
Kochergin S.A., Saushkin B.P.
Interrelation of wear resistance with quality parameters of the surface layer of parts after machining
Sutyagin A.N.
Overview of Russian inventions in field of roll-formed section cutting
Zemskova A.N., Kokorin V.N., Filimonov V.I.
Features of protection technology of air from transport complex objects
Mikhailov V.A., Sharipova N.N., Esakov A.E.
Commodity market of Russia: the quality, competitiveness and management
Alenina E.Е., Iliin A.S., Ziulina V.V.
1 - 88 of 88 Items

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies