Stankoinstrument
Quarterly, peer-reviewed scientific journal.
Editor-in-Chief
- Sergey V. Novikov, Candidate of Science (Engineering).
Publisher
- JSC "Advertising and Publishing Center "Technosphere"
Founders
- Joint-Stock Company "Advertising and Publishing Center «Tekhnosfera»
- Association of manufacturers of machine tool products "Stankoinstament"
Indexing
- Russian Science Citation Index (RSCI)
- CrossRef
- Google Scholar
- Ulrich's Periodicals Directory
- WorldCat
Frequency
- 4 issues per year
About journal
“Stankoinstrument” is a branch scientific and technical journal that comprehensively examines the problems of the machine tool industry throughout its product life cycle: from scientific developments to industrial production and operation.
The journal publications comprehensively cover the following topics:
- State policy in the field of machine-tool industry of Russia and the Customs Union
- Import substitution problems
- Scientific, applied and legislative issues of machine tools and tool manufacturing
- Standardization, measurement and metrological assurance
- Machine Tool Economy
- The market of machine tools and instruments
- Personnel training
- History
Main headings
- Processing machines
- Material Processing Technologies
- Instruments and tool systems
- Components
- Information technologies
- Robotics and Mechatronics
- Measuring equipment
- Education
- About the past in the present
Current Issue
Open Access
Access granted
Subscription or Fee Access
No 4 (2025)
We are 10 years old
12-13
„Industry 4.0“: some problematic issues
Abstract
The systemic problems of implementing the „Industry 4.0“ concept, as well as managing information and telecommunications networks that integrate production facilities, are discussed. It is suggested that the technical implementation of the „Industry 4.0“ concept is most effective when using neural networks.
14-18
Case Story
Spetsinstrument
20-21
StankoArtel
22-23
R-Stal
24-25
TOPICAL INTERVIEW
32-38
ТЕХНОЛОГИИ ОБРАБОТКИ МАТЕРИАЛОВ
Combined method for processing rolling stock parts
Abstract
A combined method for processing rolling stock parts is proposed, which consists of combining the process of restoring worn surfaces with subsequent hardening through boriding from coatings with high-frequency heating. Boriding provides the required hardness and wear resistance and eliminates structural defects of the deposited metal and substrate. At the same time, conditions for maintainability during repeated restoration and hardening are created.
40-42
TOOLS AND TOOL SYSTEMS
Influence of setting size control errors of thread-cutting heads with round radial combs on cutting conditions
Abstract
Theoretical studies have been conducted on influence of recommended setting sizes of thread-cutting heads equipped with round radial combs, and the errors in their control, on the pattern of changes in the rake angle and bearing surfaces of the threaded pair, taking into account the kinematic features of cutting and the arrangement of forming elements on the cutting part of the tool. Values of the setting sizes of the thread-cutting head have been obtained that ensure the required rake angles on the elementary cutting profiles of the working part of the tool. The parameters of the thread being cut have been determined under which the possibility of using special means of excess size control, applied in industry, is limited. It has been shown that to ensure the cutting and calibrating part of the tool can perform its functions, selection or design of means for controlling the amount of excess must be carried out taking into account the analytically derived relationship between the structural and geometric parameters of the threaded pair a comb and a workpiece.
44-49
STANDARDISATION AND CERTIFICATION
50-56
MEASURING EQUIPMENT
58-60
62-73
LOOKING BACK
Academician I. I. Artobolevsky – foreseeing the future. On the 120th anniversary of his birth
74-77