检索

SINGLE-FREQUENCY METHOD SIMULATION FOR DETERMINation of VERTICAL IONOSPHERIC SIGNAL DELAY

Kurnosov A., Fateev Y.

(Rus)

卷 23, 编号 1 (2022)

Determination of criteria for assessing the conformity of the refrigerator unit with the control parameters, the algorithm of their definition

Shurinova D., Suvorov A., Kovalenko A., Murygin A.

(Rus)

卷 20, 编号 2 (2019)

Investigation of the metrological characteristics of the PulsESPI system applied to the precision inspection of thermal deformations

Zavyalov P., Kravchenko M., Urzhumov V., Kuklin V., Mikhalkin V.

(Eng)

卷 23, 编号 2 (2022)

Method for calculating the optimal geometry of a vortex ejector

Kuznetsov V., Makarov V., Shchuka I.

(Rus)

卷 21, 编号 3 (2020)

Simulation of the induction soldering process of waveguide paths from aluminum alloys

Bocharova O., Murygin A., Bocharov A., Zaitsev R.

(Eng)

卷 25, 编号 1 (2024)

Calculation of the coupling loss factors for the angle connected beams

Kravchunovky A.

(Rus)

(Eng)

卷 22, 编号 3 (2021)

Dependence of the degree of water purification on the specific amount of electricity and the definition time

Shestakov I., Khilyuk A.

(Rus)

(Eng)

Comparative analysis of edge detection methods for lines search on the basis of Hough transform method

Zotin A., Borisov Y., Lisitsa A.

(Rus)

卷 23, 编号 3 (2022)

Modeling and verification of working process parameters in gas generators for pressurizing fuel tanks of liquid propellant rocket propulsion systems

Sheludko M., Nazarov V., Zenyuk K., Nazarova L.

(Rus)

卷 21, 编号 2 (2020)

Investigation of the metrological characteristics of the PulsESPI system applied to the precision inspection of thermal deformations

Zavyalov P., Kravchenko M., Urzhumov V., Kuklin V., Mikhalkin V.

(Eng)

卷 23, 编号 3 (2022)

Methodological principles for the formation of a number of unified space communication satellite platforms

Chebotarev V., Zimin I., Vnukov A., Shangina E.

(Rus)

卷 21, 编号 1 (2020)

Influence of a constant electric field on the adsorption purification of water from iron ions

Shestakov I., Khilyuk A.

(Eng)

卷 23, 编号 1 (2022)

Investigation of the stress state and assessment of the stability of an anisogrid cylindrical shell when changing the parameters of the rib structure under static loading

Lidiya M., Burnysheva T.

(Rus)

卷 23, 编号 4 (2022)

Magnetic properties of M_n1–xGd_xSe solid solutions

Zhivulko A., Yanushkevich K., Danilenko E., Zelenov F., Bandurina O.

(Rus)

卷 24, 编号 2 (2023)

Conservative semi-Lagrangian method for continuity equation with various time steps in different parts of computational domain

Vyatkin A., Maltsev A.

(Rus)

卷 11, 编号 7 (2010)

RESEARCH OF THE SEMI-MARKOVIAN PROCESS IN CONDITIONS OF LIMITEDLY RARE CHANGES IN ITS STATE

Gorbatenko A., Nazarov A.

(Rus)

卷 18, 编号 4 (2017)

NUMERICAL AND STATISTICAL METHOD FOR SOLVING THE HEAT EXCHANGE PROBLEMS IN THE HEAT-PROTECTIVE CONSTRUCTIONS OF THE HONEYCOMB TYPE

Gusev S., Nikolaev V.

(Rus)

METHOD OF DESIGNING GEAR DRIVE MECHANISM OF DIFFERENT PURPOSE

Vavilov D., Lukin R., Usakov V.

(Rus)

卷 12, 编号 5 (2011)

MATHEMATICAL AND NUMERICAL MODELLING OF CURRENTS OF VISCOUS THERMALLY CONDUCTIVE GAS

Shchepanovskaya G.

(Rus)

卷 11, 编号 2 (2010)

RESEARCH OF SEMIMARKOVIAN PROCESS IN CONDITIONSOF LIMIT RARE CHANGES OF ITS STATES

Gorbatenko A., Nazarov A., Gorbatenko A., Nazarov A.

(Rus)

THE CONSTRUCTION OF PROBABILISTIC RELIABILITY MODELS ON THE BASIS OF CURRENT STATUS DATA

Chimitova E.

(Rus)

卷 11, 编号 3 (2010)

Optical measuring systems and laser technologies for industrial applications

Chugui Y.

(Rus)

卷 13, 编号 5 (2012)

NUMERICAL COMPUTATIONS FOR ARTIFICIAL EARTH SATELLITE POSITION UNDER RESTRICTIONS ON MEASUREMENTS ERRORS

Rogalyov A., Rogalyov A.

(Rus)

卷 12, 编号 2 (2011)

Short-term forecasting of mining enterprise energy demand by univariate methods

Val' P., Val P.

(Rus)

卷 11, 编号 1 (2010)

The state aviation airplanes functional systems reliability calculation methods comparison

Preis A.

(Rus)

卷 10, 编号 2 (2009)

COMPARATIVE ANALYSIS OF APPROACHES TO THE ESTIMATION OF THE ENTERPRISES INVESTMENT APPEAL

Anischenko J., Logacheva I.

(Rus)

卷 22, 编号 2 (2021)

Manufacturing technology honeycomb core from polymeric composite materals

Rudenko M., Mikheev A., Girn A.

(Rus)

(Eng)

卷 15, 编号 1 (2014)

Analysis of shear flexible beam with both clamped ends by Ritz method

Nesterov V.

(Rus)

Numerical investigation of the Problem of cohesive running soils punching shear

Kuzovatova O., Sadovsky V.

(Rus)

卷 17, 编号 1 (2016)

CAD SYSTEM FOR PERSPECTIVE POWER SUPPLY NETWORK DEVELOPMENT TASK SOLUTION

Kuzmina I.

Mathematical methods used to assess the position and form accuracy of a large-sized spacecraft reflector

Goldobin N.

(Rus)

卷 11, 编号 6 (2010)

STUDY OF SHIELDING MATERIALS COUPLING RESISTANCE

Vlasov A., Bol'shakov D., Avakumov R., Vlasov A., Bolshakov D., Avakumov R.

(Rus)

卷 10, 编号 4 (2009)

NUMERUCAL SIMULATION OF THE CESIUM CYCLEIN THE UPPER ATMOSPHERE BY MEANS OF L -STABLE METHODOF THE SECOND ORDER OF ACCURACY

Novikov A., Novikov E.

(Rus)

卷 10, 编号 1-1 (2009)

Formation of algorithms of operating influences on the basisof numerical methods

Kogut A., Panfilova N.

(Rus)

卷 12, 编号 1 (2011)

ON MECHANISM OF DISCHARGEDWATERS ELECTROCHEMICALCLEANING WITHALTERNATING CURRENT

Raeva O., Shestakov I., Feyler O., Raeva O., Shestakov I., Feiler O.

(Rus)

卷 11, 编号 2 (2010)

JOINT CALCULATION OF MECHANICAL AND ELECTRODYNAMICCHARACTERISTICS OF UMBRELLA ANTENNA

Evdokimov A., Buyanov Y., Ponomarev S., Shipilov G., Khalimanovich V., Evdokimov A., Buyanov Y., Ponomarev S., Shipilov G., Khalimanovich V.

(Rus)

卷 16, 编号 4 (2015)

Numerical simulation of electron-beam welding with a longitudinal oscillation of the beam based on the experimental determination of the keyhole form

Permyakov G., Trushnikov D., Belenkiy V., Olshanskaya T.

Application of hermitian biquadratic finite element

Shaydurov V., Shut S.

(Rus)

卷 15, 编号 3 (2014)

Structural analysis in ANSYS of the axial flux permanent magnet generator

Karpenko E., Kolbasina N., Morozov D.

(Rus)

卷 14, 编号 3 (2013)

DEVELOPMENT OF COMPOSITE PRECISION SATELLITE REFLECTOR: FINITE ELEMENT CONSTRUCTION MODELING

Lopatin A., Pasechnik K., Vlasov A., Shatov A.

(Rus)

Calculation of eigenvalues in the problem of unsteady heat transfer through a cylindrical wall with mixed boundary conditions

Vidin Y., Ivanov D.

(Rus)

卷 17, 编号 3 (2016)

CALCULATION OF COMPOSITE CYLINDRICAL SHELLS USING MULTIGRID ELEMENTS

Matveev A., Grishanov A.

卷 11, 编号 6 (2010)

FEATURES OF SIMULATION OF PROCESS OF SEMICONTINUOUSEXTRUSION OFALUMINUMALLOYS

Gubanov I., Belyaev S., Shirokov V., Salatov A., Maslov I., Gubanov I., Belyaev S., Shirokov P., Salatov A., Maslov I.

(Rus)

卷 10, 编号 4 (2009)

AUTOMATIC DEVICE FOR MEASURING RESISTIVITY OF SILICON FOUR-POINT PROBE METHOD

Vladimirov V., Grinin E., Sergiy M., Shepov V.

(Rus)

卷 13, 编号 5 (2012)

ON FEEBLE SOLUBILITY OF MIXED PROBLEM FOR NONLINEAR EQUATION WITH PSEUDO-PARABOLIC OPERATOR OF HIGH DEGREE

Yuldashev T.

(Rus)

卷 12, 编号 4 (2011)

DETERMINATION OF FUNDAMENTAL OSCILLATION FREQUENCY OF THE RECTANGULAR SANDWICH PLATE TIGHTENED IN THE CENTRAL POINT

Deev P.

(Rus)

卷 15, 编号 1 (2014)

Methodological approach to risk management at the enterprises of the rocket and space industry

Tovstonoshenko V.

(Rus)

The estimation of the motion model errors influence on precision of the building of confidence region for near-earth asteroids

Sambarov G., Syusina O.

(Rus)

Technique solution of the problem of the pipeline precast structure frequency response search with application of the finite element method

Bobarika I., Yakhnenko M.

(Rus)

卷 14, 编号 2 (2013)

NUMERICAL RESEARCH OF METHODS FOR MULTIDIMENTIONAL SOLITONS SEARCH

Savenkova N., Laponin V.

(Rus)

卷 19, 编号 3 (2018)

INCREASING THE ACCURACY OF THE CONTACT METHOD OF MEASURING THE CURRENT SQUARE OF CRYSTALS GROWN BY THE WAY OF THE CZOHRALSKY

Sahansky S., Yulenkov S.

(Rus)

卷 18, 编号 1 (2017)

DETERMINATION OF THE FUNDAMENTAL FREQUENCY OF A SANDWICH PANEL AS CONSTRUCTIONAL PART OF SPACECRAFT BODY

Deev P., Sinkovskiy F.

(Rus)

An automatic device for measuring resistivity of the silicon four-point probe method

Vladimirov V., Shepov V., Grinin E., Sergiy M.

(Rus)

卷 12, 编号 5 (2011)

OLAP-MODELING METHOD OF TERRITORIAL PROGRAMS OF MEDICAL CARE

Nozhenkov A.

(Rus)

卷 10, 编号 2 (2009)

PROJECTING METHOD IN PROBLEM OF P ARAMETERS CALCULATING OF REGRESSIVE MUL TIFACTOR-MODEL

Mitasov I., Zavyalkin A.

(Rus)

卷 15, 编号 5 (2014)

Indicators for assessing the effectiveness of innovation investment projects of high-tech industries

Smorodinov R., Smorodinova N.

(Rus)

Annex of the variation and differential method for calculation of the longitudinally cross bend of plates by inertia forces

Sabirov R.

(Rus)

Oost accounting method in innovative enterprises of rocket and space industry

Zolotareva G., Fedorenko I.

(Rus)

卷 14, 编号 3 (2013)

STIFFNESS OF THE SANDWICH PANEL WITH FREE EDGE AS A CONSTRUCTIONAL PART OF A SPACECRAFT

Lopatin A., Deev P., Rutkovskaya M.

(Rus)

卷 19, 编号 1 (2018)

MODERN PROBLEMS OF THE PRICING FORMATION SYSTEM FOR THE FORMATION OF ESTIMATE VALUE IN THE TERRITORY OF THE RUSSIAN FEDERATION

Vlasova G., Knyazeva N., Shindina T.

(Rus)

卷 17, 编号 3 (2016)

GEOSTATIONARY ORBITAL INJECTION OF A SPACECRAFT BY THE COMBINED METHOD

Yakovlev A., Vnukov A., Balandina T., Balandin E., Tarletskiy I.

NUMERICAL ESTIMATIONS OF MAXIMUM DEVIATIONS FOR AIRCRAFT TRAJECTORIES IN THE ATMOSPHERE

Rogalyov A., Rogalyov A.

(Rus)

Buckling of orthotropic plates with the two free edges loaded for the pure in-plane bending moment

Lopatin A., Avakumov R.

(Rus)

卷 13, 编号 1 (2012)

FEATURES OF EXPERIMENTAL DEFINITION OF COMPOSITE MATERIALS DURABILITY AGAINST EROSIVE IMPACT OF STATIONARY PLASMA THRUSTERS

Nadiradze A., Rachmatullin R., Kochura S., Maksimov I., Smirnov V.

(Rus)

卷 12, 编号 4 (2011)

DEVELOPMENT OF MATHEMATICAL MODELS OF DYNAMICS AND ESTIMATION OF FATIGUE LIFE OF TURBOMACHINES BLADES WITH ACCOUNT OF GEOMETRIC NONLINEARITY

Rеpetskiy O., Bui M.

(Rus)

卷 16, 编号 4 (2015)

CONCEPTIONAL APPROACH AND MANAGEMENT TECHNIQUE TO MANAGE RISKS OF INNOVATIONS IN THE SPACE INDUSTRY

Mikhin P., Antamoshkin A., Antamoshkina E.

Labour efficiency assessmnent of aerospace industry innovative enterprises design office engineers

Boldina T., Rusakov S.

(Rus)

To calculation of plates in the conditions of the flat tension on temperature loadings with the help of the variation and differential method in tension functions

Sabirov R.

(Rus)

Assessment of coagulation influence on index of purification of water from metal ions

Shestakov I., Raeva O.

(Rus)

Modal finite element analysis of shear flexible beams

Nesterov V.

(Rus)

卷 19, 编号 4 (2018)

IMPROVEMENT OF THE METHOD OF DETERMINING CAVITATION CHARACTERISTICS OF THE CENTRIFUGAL PUMPS

Nazarov V., Nazarova L., Shvetsova D., Savchin D.

(Rus)

卷 17, 编号 4 (2016)

SINGLE-FREQUENCY METHOD OF investigation FOR DETERMINATION OF VERTICAL IONOSPHERIC SIGNAL DELAY

Kurnosov A., Fateev Y.

卷 16, 编号 3 (2015)

AXIAL BALL STRAIN INFLUENCE ON MEASURABLE VALUE OF BALL INDENTATION BY TOP POINT OF BALL

Avtonomov N., Tololo A.

Two-level genetic algorithm for x-ray powder diffraction structure analysis

Yakimov Y.

(Rus)

The numerical modeling of a cesium cycle in the upper atmosphere by an l-stable method of second-order accuracy

Novikov A., Novikov E.

(Rus)

卷 13, 编号 5 (2012)

DETERMINATION OF VIBRATIONS DOMINANT MODE OF AN ORTHOTROPIC PLATE FASTENED TO THE BEDDING ANGLES

Lopatin I.

(Rus)

卷 12, 编号 1 (2011)

ABOUT CONNECTION OF POINT REPRESENTATIONSOF FUNCTIONSAND THEIR LAPLACE TRANSFORMS

Osipov V., Osipov V.

(Rus)

卷 11, 编号 5 (2010)

VIBRATION OF A PLATE WITH LOW TRANSVERSE SHEAR STIFFNESS

Nesterov V., Nesterov V.

(Rus)

卷 16, 编号 2 (2015)

ASSESSMENT OF LOGISTICAL potential OF THE ENTERPRISE OF ROCKET-SPACE INDUSTRY ON THE BASIS OF INDICATOR METHOD

Belyakova E.

(Rus)