Medical applications of photopolymer printing technologies
- 作者: Bordina G.Е.1, Lopina N.P.1, Shabalin А.S.1, Kanunnikov Т.I.1
-
隶属关系:
- Tver State Medical University, Ministry of Health of Russia
- 期: 卷 35, 编号 5 (2024)
- 页面: 23-27
- 栏目: Lecture
- URL: https://journals.eco-vector.com/0236-3054/article/view/633276
- DOI: https://doi.org/10.29296/25877305-2024-05-03
- ID: 633276
如何引用文章
开放存取
##reader.subscriptionAccessGranted##
详细
Photopolymer printing technologies are getting increasingly popular especially in the medical field. They allow the creation of precise 3D models of organs, tissues, bones and other anatomical structures with a high degree of detail and accuracy. This ability has become particularly important in medical practice, where the accuracy and quality of the models are fundamental to assessing the patient’s condition, planning treatment and preparing surgery. This article considers technologies of stereolithographic printing in medicine and their practical application, advantages and disadvantages, in addition, the potential of the application of this technology to treat people who suffered serious injuries during a special military operation.
全文:
作者简介
G. Bordina
Tver State Medical University, Ministry of Health of Russia
编辑信件的主要联系方式.
Email: gbordina@yandex.ru
Candidate of Biological Sciences
俄罗斯联邦, TverN. Lopina
Tver State Medical University, Ministry of Health of Russia
Email: gbordina@yandex.ru
Candidate of Chemical Sciences
俄罗斯联邦, TverА. Shabalin
Tver State Medical University, Ministry of Health of Russia
Email: gbordina@yandex.ru
俄罗斯联邦, Tver
Т. Kanunnikov
Tver State Medical University, Ministry of Health of Russia
Email: gbordina@yandex.ru
俄罗斯联邦, Tver
参考
- Полушкин Д.П. 3D-печать методом SLA. Инновационное развитие. 2018; 1 (18): 24–5 [Polushkin D.P. 3D-printing by the SLA method. Innovacionnoe razvitie. 2018; 1 (18): 24–5 (in Russ.)]. doi: 10.31857/S0235711922030038
- Современное состояние SLA-технологий. Сб. мат-лов II Междунар. научно-практ. конф. Кемерово, 3–4 октября 2018 г. Кемерово: Изд-во КГТУ им. Т.Ф. Горбачева, 2018; с. 147–51 [Modern condition of SLA-technologies. Materials of II international scientific and practical conference, Kemerovo, 3–4 okt 2018. Kemerovo: Izd-vo Kuzbass State Technical University, 2018; рр. 147–51 p. (in Russ.)].
- Лысыч М.Н., Белинченко Р.А., Шкильный А.А. Материалы для 3D печати. Актуальные направления научных исследований XXI века: теория и практика. 2014. 4-3 (9-3): 200–5 [Lysych M.N., Belinchenko R.A., Shkil'nyi A.A. Materialy dlya 3D pechati. Aktual'nye napravleniya nauchnykh issledovanii XXI veka: teoriya i praktika. 2014. 4-3 (9-3): 200–5 (in Russ.)].
- Deng K., Chen H., Wei W. et al. Accuracy of tooth positioning in 3D-printing aided manufactured complete dentures: An in vitro study. J Dent. 2023; 131: 104459. doi: 10.1016/j.jdent.2023.104459
- Боpдина Г.Е., Лопина Н.П., Паршин Г.С. и др. К вопросу о механизме световой полимеризации композитов. Российский стоматологический журнал. 2022; 26 (2): 163–70 [Bordina G.E., Lopina N.P., Parshin G.S. et al. Mechanism of light polymerization of composites. Russian Journal of Dentistry. 2022; 26 (2): 163–70 (in Russ.)]. doi: 10.17816/1728-2802-2022-26-2-163-170
- Topa M. Light cured dental composite resins [Internet]. Encyclopedia. URL: https://encyclopedia.pub/item/revision/cc56ab086bd8c94dd72116f4b2e9eb6d
- Park S.M., Park J.M., Kim S. K. et al. Flexural Strength of 3D-Printing Resin Materials for Provisional Fixed Dental Prostheses. Materials (Basel). 2020; 13 (18): 3970. doi: 10.3390/ma13183970
- Ribeiro A.K.C., de Freitas R.F.C.P., de Carvalho I.H.G. et al. Flexural strength, surface roughness, micro-CT analysis, and microbiological adhesion of a 3D-printed temporary crown material. Clin Oral Investig. 2023; 27 (5): 2207–20. doi: 10.1007/s00784-023-04941-3
- Nusem E., Bray L., Lillia J. et al. Utility of 3D Printed Models Versus Cadaveric Pathology for Learning: Challenging Stated Preferences. Med Sci Educ. 2022; 32 (6): 1513–20. doi: 10.1007/s40670-022-01684-w
- McMenamin P.G., Quayle M.R., McHenry C.R. et al. The production of anatomical teaching resources using three-dimensional (3D) printing technology. Anat Sci Educ. 2014; 7 (6): 479–86. doi: 10.1002/ase.1475
- Vaccarezza M., Papa V. 3D printing: a valuable resource in human anatomy education. Anat Sci Int. 2015; 90 (1): 64–5. doi: 10.1007/s12565-014-0257-7
- Garcia J., Yang Z., Mongrain R. et al. 3D printing materials and their use in medical education: a review of current technology and trends for the future. BMJ Simul Technol Enhanc Learn. 2018; 4 (1): 27–40. doi: 10.1136/bmjstel-2017-000234
- Anadioti E., Musharbash L., Blatz M.B. et al. 3D printed complete removable dental prostheses: a narrative review. BMC Oral Health. 2020; 20 (1): 343. doi: 10.1186/s12903-020-01328-8
- Schweiger J., Stumbaum J., Edelhoff D. et al. Systematics and concepts for the digital production of complete dentures: risks and opportunities. Int J Comput Dent. 2018; 21 (1): 41–56.
- Park S.M., Park J.M., Kim S.K. et al. Comparison of Flexural Strength of Three-Dimensional Printed Three-Unit Provisional Fixed Dental Prostheses according to Build Directions. J Korean Dent Sci. 2019; 12 (1): 13–9. doi: 10.5856/JKDS.2019.12.1.13
- Sakes A., Hovland K., Smit G. et al. Design of a novel three-dimensional-printed two degrees-of-freedom steerable electrosurgical grasper for minimally invasive surgery. ASME J Med Devices. 2018; 12 (1): 011007. doi: 10.1115/1.4038561
- Culmone C., Lussenburg K., Alkemade J. et al. A fully 3D-printed steerable instrument for minimally invasive surgery. Materials (Basel). 2021; 14 (24): 7910. doi: 10.3390/ma14247910
- Papadopoulos V.N., Tsioukas V., Suri J.S. 3D Printing: Application in Medical Surgery. Vol. 2. Elsevier, 2021; 368 р.
- Haffner M., Quinn A., Hsieh T.Y. et al. Optimization of 3D Print Material for the Recreation of Patient-Specific Temporal Bone Models. Ann Otol Rhinol Laryngol. 2018; 127 (5): 338–43. doi: 10.1177/0003489418764987
补充文件
