Problems and ways of increasing the efficiency of plant raw material utilisation in the production of building materials

Мұқаба

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат Ашық рұқсат
Рұқсат жабық Рұқсат берілді
Рұқсат жабық Рұқсат ақылы немесе тек жазылушылар үшін

Аннотация

An analysis of the problems and prospects for increasing the efficiency of using plant-based raw materials in the production of building materials was conducted. Despite the global increase in demand for eco-friendly construction solutions, such as cross-laminated timber (CLT), wood plastic composite (WPC), and oriented strand board (OSB) boards, Russia’s wood processing remains primitive, resulting in raw material exports, lost value, and environmental risks. The main problems include outdated technologies, a lack of infrastructure, a low percentage of low-quality wood processing (up to 74% of hardwoods), and a high dependence on low-efficiency modifying compounds. Proposed solutions include state support, investments in logistics and the digitalization of forestry, and the development of scientific methods for modifying plant raw materials. The article pays special attention to physicochemical modification methods using elemental-organic modifiers (EOMs), which provide materials with resistance to moisture, biocorrosion, and fire while maintaining their mechanical properties. The advantages of combined approaches, such as vacuum pressure impregnation, the application of biopolymers and nanoparticles, and waste recycling, are also considered. Research has proven that EOMs (organophosphorus, organosilicon, and boron-nitrogen compounds) solve key problems, including leachability and the deterioration of the mechanical properties and surface quality of substrates. EOMs increase the durability of lignocellulosic building materials. These results are relevant for implementing ESG strategies, reducing the carbon footprint, and developing wooden house construction in Russia.

Толық мәтін

Рұқсат жабық

Авторлар туралы

I. Stepina

National Research Moscow State University of Civil Engineering

Хат алмасуға жауапты Автор.
Email: sudeykina@mail.ru

Candidate of Sciences (Engineering)

Ресей, 26, Yaroslavskoe Highway, Moscow, 129337

V. Strokova

Belgorod State Technological University named after V.G. Shukhov

Email: vvstrokova@gmail.com

Doctor of Sciences (Engineering)

Ресей, 46, Kostyukova Street, Belgorod, 308012

V. Il’ina

Saint-Petersburg State University of Film and Television

Email: Ilina-victory@yandex.ru

Candidate of Sciences (Engineering)

Ресей, 13, Pravdy Street, Sankt-Petersburg, 191119

Әдебиет тізімі

  1. Hill C.A.S. Wood modification: chemical, thermal and other processes. 2006. 239 p. EDN: SSQTMB. https://doi.org/10.1002/0470021748
  2. Durmaz S., Yildiz Ü., Yildiz S. Alkaline enzyme treatment of spruce wood to increase permeability. BioResources. 2015. Vol. 10. No. 3, pp. 4403–4410. https://doi.org/10.15376/biores.10.3.4403-4410
  3. Torgovnikov G., Vinden P. High-intensity microwave wood modification for increasing permeability. Forest products journal. 2009. Vol. 59. No. 4, pp. 84–92.
  4. Papadopoulos A.N., Bikiaris D.N., Mitropoulos A.C., Kyzas G.Z. Nanomaterials and chemical modifications for enhanced key wood properties: A review. Nanomaterials. 2019. Vol. 9. No. 4. EDN: PKSVAG. https://doi.org/10.3390/nano9040607
  5. Esteves B.M., Pereira H.M. Wood modification by heat treatment: A review. BioResources. 2009. Vol. 4. No. 1, pp. 370–404. EDN: YBGMCT
  6. Digaitis R., Fredriksson M., Thybring E.E., Thygesen L.G. Targeted acetylation of wood: a tool for tuning wood-water interactions. Cellulose. 2021. Vol. 28. No. 12, pp. 8009–8025. EDN: PWBBXX. https://doi.org/10.1007/s10570-021-04033-z
  7. Augustina S., Dwianto W., Wahyudi I. et al. Wood impregnation in relation to its mechanisms and properties enhancement. BioResources. 2023. Vol. 18. No. 2. EDN: PPNMDI. https://doi.org/10.15376/biores.18.2.augustina
  8. Aguayo M.G., Erazo O., Montero C. et al. Analyses of impregnation quality and mechanical properties of radiata pine wood treated with copper nanoparticle- and micronized-copper-based wood preservatives. Forests. 2022. Vol. 13. No. 10, pp. 1636. EDN: PBRYRB. https://doi.org/10.3390/f13101636
  9. Thygesen L.G., et al. Modification of wood by treatment with silica nanoparticles. Wood Science and Technology. 2020. Vol. 54 (4), pp. 929–942. EDN: RJCWJT. https://doi.org/10.1007/s00226-020-01189-y
  10. Besserer A., Troilo S., Girods P. et al. Cascading recycling of wood waste: a review. Polymers. 2021. Vol. 13. No. 11. 1752. EDN: GBVDYS. https://doi.org/10.3390/polym13111752
  11. Andeme Ela R.C., Chipkar S.H., Bal T.L. et al. Lignin-propiconazole nanocapsules are an effective bio-based wood preservative. ACS Sustainable Chemistry and Engineering. 2021. Vol. 9. No. 7, pp. 2684–2692. EDN: KBCSIT. https://doi.org/10.1021/acssuschemeng.0c07742
  12. Žigon J., Saražin J., Šernek M. et al. Enhancement of strength of adhesive bond between wood and metal using atmospheric plasma treatment. Cellulose. 2020. Vol. 27. No. 11, pp. 6411–6424. EDN: QBZMQC. https://doi.org/10.1007/s10570-020-03212-8
  13. Teacǎ C.A., Roşu D., Bodîrlǎu R., Roşu L. Structural changes in wood under artificial UV light irradiation determined by FTIR spectroscopy and color measurements-a brief review. BioResources. 2013. Vol. 8. No. 1, pp. 1478–1507. EDN: RPIXDX. https://doi.org/10.15376/biores.8.1.1478-1507
  14. El-sayed N., Hasanin M., Kamel S. Wood by-products as UV protection: a consequence review. Journal of Renewable Materials. 2024. Vol. 12. No. 4, pp. 699. https://doi.org/10.32604/jrm.2024.049118
  15. Pokrovskaya E.N., Koteneva I.V., Naganovsky Yu.K. Durability of the protective action of wood compositions based on organoelement compounds. Stroitel’nye Materialy [Construction Materials]. 2004. No. 5, pp. 52–54. (In Russian). EDN: IBENOJ
  16. Evans P.D. Photostabilization of wood using nanoparticle coatings. Progress in Materials Science. 2019. Vol. 105, pp. 100577. EDN: TVFUGI. https://doi.org/10.1016/j.pmatsci.2019.100577
  17. Pokrovskaya E.N. Increase of fire protection and strength of wooden structures by modification in a thin surface layer by nanodispersion composites. Journal of Physics: Conference Series: International Scientific Conference on Modelling and Methods of Structural Analysis 2019. MMSA 2019. Moscow. Vol. 1425. EDN: TDGWKQ. https://doi.org/10.1088/1742-6596/1425/1/012091
  18. Mai C., Militz H. Modification of wood with silicon compounds. Treatment systems based on organic silicon compounds – a review. Wood Science and Technology. 2004. Vol. 37. No. 6. pp. 453–461. EDN: FMJSWV. https://doi.org/10.1007/s00226-004-0225-9
  19. Sidorov V.I., Koteneva I.V. Study of the nature of reactions between organophosphorus and organosilicon compounds during sequential modification of wood. Vestnik of the Moscow State Forest University – Forest Bulletin. 2008. No. 4, pp. 104–106. (In Russian). EDN: JPJLKP
  20. Baranov O.V., Komarova L.G., Golubkov S.S. Hydrophobic coatings based on triethoxy(octyl)silane. Russian Chemical Bulletin. 2020. Vol. 69. No. 6, pp. 1165–1168. EDN: SAEINP. https://doi.org/10.1007/s11172-020-2884-6
  21. Wang M., Zhang J., Tong Wei et al. Effect of Al:P ratio on bonding performance of high-temperature resistant aluminum phosphate adhesive. International Journal of Adhesion and Adhesives. 2020. Vol. 100. 102627. EDN: TUQRPF. https://doi.org/10.1016/j.ijadhadh.2020.102627
  22. Cappelletto E., Maggini S., Girardi F. et al. Wood surface protection with different alkoxysilanes: a hydrophobic barrier. Cellulose. 2013. Vol. 20. No. 6, pp. 3131–3141. EDN: NYLROW. https://doi.org/10.1007/s10570-013-0038-9
  23. Fierascu R.C., Doni M., Fierascu I. Selected aspects regarding the restoration/conservation of traditional wood and masonry building materials: A short overview of the last decade findings. Applied Sciences (Switzerland). 2020. Vol. 10. No. 3, pp. 1164. EDN: YHMXRH. https://doi.org/10.3390/app10031164

Қосымша файлдар

Қосымша файлдар
Әрекет
1. JATS XML
Жүктеу
2. Fig. 1. Production volumes of unprocessed timber according to Rosstat (https://rosstat.gov.ru)

Жүктеу (69KB)
Метадеректер
3. Fig. 2. Problems and ways to improve the efficiency of lignocellulosic building materials by modifying plant raw materials (ЭОМ – organoelement modifiers; БАС – boron-nitrogen compounds; ЛУК – lignocarbohydrate complex)

Жүктеу (1MB)
Метадеректер
4. Fig. 3. Classification of modifiers for LCBM production by chemical composition

Жүктеу (488KB)
Метадеректер

© ООО РИФ "СТРОЙМАТЕРИАЛЫ", 2025