Development of a model for risk management of the provision of unreliable test results
- Authors: Afanasiev P.A.1
-
Affiliations:
- South-Western State University
- Issue: Vol 25, No 2 (2023)
- Pages: 79-87
- Section: Articles
- URL: https://journals.eco-vector.com/1990-5378/article/view/624674
- DOI: https://doi.org/10.37313/1990-5378-2023-25-2-79-87
- ID: 624674
Cite item
Full Text
Abstract
The article is devoted to the development of a risk management model for the provision of unreliable test results - the fault tree of a testing laboratory as a socio-technical system. On the basis of the constructed fault tree, the reasons for the provision of unreliable test results by the laboratory were identified, recommendations were given for their quantitative assessment, corrective and preventive measures.
About the authors
Pavel A. Afanasiev
South-Western State University
Author for correspondence.
Email: pavelaf@gmail.com
Post-Graduate Student
Russian Federation, KurskReferences
- GOST ISO/IEC 17025-2019. Interstate standard. General requirements for the competence of testing and calibration laboratories (enacted by the Order of Rosstandart dated July 15, 2019 N 385-st) // URL: http://www.consultant.ru/document/cons_doc_LAW_332887/ (Accessed: February 15, 2022)
- Chepegin, I.V. Reliability of technical systems and technogenic risk: study guide / I. V. Chepegin; Kazan National Research Technological University. - Kazan: Kazan Research Technological University (KNITU), 2017. - 156 p. : diagrams, tables, illustrations. – Access mode: by subscription. – URL: https://biblioclub.ru/index.php?page=book&id=500621 (date of access: 02/15/2022). - Bibliography. in book. – ISBN 978-5-7882-2290-5. – Text : electronic.
- Leonova, O.V. Reliability of mechanical systems: textbook: [16+] / O. V. Leonova; Moscow State Academy of Water Transport. – Moscow: Altair: MGAVT, 2014. – 179 p. : illustrations, tables, schemes. – Access mode: by subscription. – URL: https://biblioclub.ru/index.php?page=book&id=429858 (date of access: 02/15/2022). – Bibliography. in book. – Text : electronic.
- Gorbunova, T.S. Measurements, tests and control. Methods and means: textbook / T.S. Gorbunova; Ministry of Education and Science of Russia, Kazan National Research Technological University. – Kazan: Kazan Research Technological University (KNITU), 2012. – 108 p. : ill. – Access mode: by subscription. – URL: https://biblioclub.ru/index.php?page=book&id=258770 (accessed 17.02.2022). – Bibliography: p. 103. - ISBN 978-5-7882-1321-7. – Text : electronic.
- Safety and reliability of technical systems: textbook. - Moscow: Logos, 2004. – 376 p. – Access mode: by subscription. – URL: https://biblioclub.ru/index.php?page=book&id=84762 (date of access: 02/21/2022). – ISBN 978-5-98704-115-5. – Text: electronic.
- Order of the Ministry of Economic Development of Russia dated October 26, 2020 N 707 (as amended on December 30, 2020) «On approval of the accreditation criteria and the list of documents confi rming the compliance of the applicant, accredited person with the accreditation criteria» (Registered in the Ministry of Justice of Russia on November 16, 2020 N 60907) // URL: http://www.consultant.ru/document/cons_doc_LAW_367928/ (date of access: 02/21/2022)
- Kane M.M., Ivanov B.V., Koreshkov V.N., Skhirtladze A.G. Systems, methods and tools of quality management: Textbook. - St. Petersburg: Peter, 2008. – 560 p.: ill. – (Series «Tutorial»).
- GOST 14254-2015 (IEC 60529:2013) Interstate standard. Degrees of protection provided by shells (IP Code) (enacted by Order of Rosstandart dated June 10, 2016 N 604-st) // URL: https://docs.cntd.ru/document/1200136066 (date of access: 21.02.2022)
- GOST R 8.568-2017 National standard of the Russian Federation. State system for ensuring uniformity of measurements. Test equipment certifi cation. Basic concepts (enacted by the Order of Rosstandart dated December 29, 2017 N 2121-st) // URL: https://docs.cntd.ru/document/1200158321 (date of access: 21.02.2022)
- R 50.2.060-2008. State system for ensuring uniformity of measurements. Implementation of standardized methods for quantitative chemical analysis in the laboratory. Confi rmation of compliance with the established requirements (approved and put into effect by the Order of the Federal Agency for Technical Regulation and Metrology dated November 25, 2008 N 320-st) // URL: https://docs.cntd.ru/document/1200069291 (date of access: 24.02.2022)
- Afanasiev P.A. Verifi cation of test methods for low-voltage equipment / P.A. Afanasiev, A.G. Ivakhnenko // Proceedings of the Tula State University. Engineering Sciences. – 2021. – No. 12. – p. 343 – ISSN 2071-6168. – Text : electronic.
Supplementary files
![](/img/style/loading.gif)