Influence of high-cycle fatigue actions on physical-mechanical state of the plane samples hardened case
- Authors: Radchenko V.P1, Morozov A.P1, Bukatiy A.S2
-
Affiliations:
- Samara State Technical University
- Samara State Aerospace University
- Issue: Vol 17, No 3 (2009)
- Pages: 158-165
- Section: Articles
- URL: https://journals.eco-vector.com/1991-8542/article/view/19476
- DOI: https://doi.org/10.14498/tech.2009.3.%25u
- ID: 19476
Cite item
Full Text
Abstract
The influence on the characteristics roughness and microhardness of high-cycle fatigue actions of the plane samples from the alloy EI698 VD, previously hardened in the rate of the air shot blasting, was researched. It became clear, that microhardness correlates with the value of the compressing remaining tensions at hardened case, but roughness doesn't depend on rates and character of fatigue actions.
Keywords
About the authors
Vladimir P Radchenko
Samara State Technical UniversitySamara State Technical University
Andrey P Morozov
Samara State Technical UniversitySamara State Technical University
Aleksandr S Bukatiy
Samara State Aerospace UniversitySamara State Aerospace University
References
- Сулима А.М., Шулов В.А., Ягодкин Ю.Д. Поверхностный слой и эксплуатационные свойства деталей машин. - М.: Машиностроение, 1988. - 240 с.
- Сулима А.М., Евстигнеев М.И. Качество поверхностного слоя и усталостная прочность деталей из жаропрочных и титановых сплавов. - М.: Машиностроение, 1974. - 250 с.
- Биргер И.А. Остаточные напряжения. - М.: Машгиз, 1963. - 232 с.
- Кирпичев В.А., Букатый А.С. Влияние режимов пневмодробестуйной обработки на остаточные напряжения, микротвердость и сопротивление усталости // Физика прочности и пластичности материалов: Труды XVII Междунар. конф. - Самара: СамГТУ, 2009. - Т. 1. - С. 109-111.