Evaluation of reliability of axisymmetric stochastic elements of constructions under creepage on the basis of theory of runs


Probabilistic methods of evaluating of strength reliability of construction axisymmetric elements of working in creep conditions were considered. Rheological properties of the material were described by the random function of one variable (of radius r). Evaluation of reliability of stochastically inhomogeneous axisymmetric structural elements was considered by deformation criterion. The restriction was imposed on random displacement, which depends on the time and spatial coordinates. It was assumed that the random field of function w(r, t) has Gaussian distribution, for which some simplifications were made. Maximum valid value of displacement was deterministic (value was taken from the model problems). The calculation of probability of failure-free operation of microinhomogeneous thick-walled cylinder with given parameters under internal pressure q was considered as an example. The probability of failure-free operation and service life of thick-walled cylinder obtained in this work by the deformation criterion and the results obtained by other authors was compared. It was shown that this approach can be used for fail-safe constructions, which critical level of runs is a rare event.

About the authors

Nikolay N Popov

Samara State Technical University

Email: ponick25@gmail.ru
(к.ф.-м.н., доц.), доцент, каф. прикладной математики и информатики; Самарский государственный технический университет; Samara State Technical University

Ludmila V Kovalenko

Samara State Technical University

Email: flytitmouse@mail.ru
(к.ф.-м.н.), ассистент, каф. прикладной математики и информатики; Самарский государственный технический университет; Samara State Technical University


  1. Болотин В. В. Методы теории вероятностей и теории надёжности в расчетах сооружений. М.: Стройиздат, 1982. 352 с.
  2. Должковой А. А., Попов Н. Н., Радченко В. П. Решение стохастической краевой задачи установившейся ползучести для толстостенной трубы методом малого параметра // ПМТФ, 2006. Т. 47, № 1. С. 161-171.
  3. Исуткина В. Н. Разработка аналитических методов решения стохастических краевых задач установившейся ползучести для плоского деформированного состояния: Дисс. … канд. физ.-мат. наук. Самара, 2007. 247 с.
  4. Радченко В. П., Еремин Ю. А. Реологическое деформирование и разрушение материалов и элементов конструкций. М.: Машиностроение-1, 2004. 265 с.



Abstract - 11

PDF (Russian) - 12



  • There are currently no refbacks.

Copyright (c) 2012 Samara State Technical University

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies