Simulation of high-temperature shorteningof cylinders under different material creepequations
- Authors: Teraud V.V1
-
Affiliations:
- Institute of Mechanics, Lomonosov Moscow State University
- Issue: Vol 15, No 1 (2011)
- Pages: 283-290
- Section: Articles
- Submitted: 18.02.2020
- Published: 15.03.2011
- URL: https://journals.eco-vector.com/1991-8615/article/view/21124
- ID: 21124
Cite item
Full Text
Abstract
A subsidence of circular cylinders between rigid stamps at creep conditions is studied. There are three different material models. Appearance of barrel shape form is allowed (this decision is realized on the basis of package LS-DYNA). Calculations of all principal parameters were carried out at two loading programs: at constant speed of the cylinders' bases coming together and at constant compressing force. Calculations have shown that the energy, spent on subsidence of the cylinder during the first loading variant isless, than in the second variant (this difference in certain processes is equal to 8-10%).
Keywords
About the authors
Valentin V Teraud
Institute of Mechanics, Lomonosov Moscow State University
Email: ldrnww@gmail.com, loko@imec.msu.ru
; Institute of Mechanics, Lomonosov Moscow State University
References
- Малинин Н. Н. Ползучесть в обработке металлов. М.: Машиностроение, 1986. 216 с.
- Локощенко А. М., Моссаковский П. А., Терауд В. В. Исследование осадки круговых цилиндров при ползучести с учетом и без учета бочкообразования // Вычислительная механика сплошных сред, 2010. Т. 3, № 1. С. 52-62
- Локощенко А. М., Демин В. А., Носов В. В. Осадка кругового цилиндра в условиях установившейся ползучести // Изв. вуз. Машиностроение, 2007. № 4. С. 3-10.
- Локощенко А. М. Моделирование процесса ползучести и длительной прочности металлов. М.: МГИУ, 2007. 264 с.
- Терауд В. В. Инновационная многокомпонентная система бесконтактных измерений при высокотемпературных испытаниях / В сб.: Тр. конф.-конкурса молодых ученых Института механики МГУ (14-16.10.2009). М.: МГУ, 2010. С. 307-317.