On assessment method of brass as the material for explosively formed penetrator lining
- Authors: Reout I.I1, Krivchenko A.L1
-
Affiliations:
- Samara State Technical University
- Issue: Vol 15, No 4 (2011)
- Pages: 188-190
- Section: Articles
- Submitted: 18.02.2020
- Published: 15.12.2011
- URL: https://journals.eco-vector.com/1991-8615/article/view/20987
- ID: 20987
Cite item
Full Text
Abstract
The calculation of a front tossing speed of plates by A-IX-1 and Cyclotol-50/50 charges was made on the basis of tossing elements dynamic adiabats. It is shown that as opposed to copper plate the kinetic module for the mass unit is about 4 % higher for tossing the brass plate in case of using A-IX-1 and is about 8 % higher in case of using Cyclotol-50/50.
Keywords
About the authors
Igor I Reout
Samara State Technical University
Email: enterfax@mail.ru
аспирант, каф. защиты в чрезвычайных ситуациях; Самарский государственный технический университет; Samara State Technical University
Alexander L Krivchenko
Samara State Technical University
Email: snex@rambler.ru
(д.т.н., доц.), профессор, каф. защиты в чрезвычайных ситуациях; Самарский государственный технический университет; Samara State Technical University
References
- van Thiel M., Kusubov A. S., Mitchell A. C. Compendium of shock wave data: Technical Report UCRL-50108. Livermore, CA: Lawrence Radiation Lab., 1967.
- Анисичкин В. Ф. Обобщённые ударные адиабаты элементов // ПМТФ, 1978. № 3. С. 117-121.
- Андреев С. Г., Бабкин А. В., Баум Ф. А. и др. Физика взрыва: в 2-x томах. Т. 1 / ред. Л. П. Орленко. М.: Физматлит, 2004. 823 с.
- Кривченко А. Л., Кривченко Д. А., Реут И. И., Чуркин О. Ю. Расчет ударных адиабат d-металлов и их сплавов с использованием периодического закона Д. И. Менделеева / В сб.: Ударные волны в конденсированных средах. СПб., 2008. С. 253-255.
- Иванченко Е. С. Прецизионные модели ударных адиабат и база ТЕФИС: Автореф. дисс. ... канд. физ.-мат. наук: 05.13.18. М.: ИММ РАН, 2009. 22 с.