STUDY ON A-TIG WELDING ENERGY EFFICIENCY OF STAINLESS STEELS USING INDIVIDUAL FLUX-OXIDES. PART 1: EVALUATION OF THE A-TIG ARC ENERGY EFFICIENCY TO THE WELD DEPTH OF PENETRATION


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

This article presents the results of the study of activating oxide fluxes effects on the energy efficiency of the TIG welding arc (A-TIG) influence. This efficiency was estimated by the amount of energy spent by the arc (q) at the depth of penetration (P). It is revealed that the arc energy efficiency factor “Kepac” can be used as an indicator of the influence of arc energy on the efficiency of penetration of the welded metal, which is determined by the ratio of spent energy per unit of depth of penetration (q/P) at TIG and A-TIG welding. In accordance with the results of the research, it is observed an increase of the energy efficiency on the welding arc penetration capability of all individual oxides used as fluxes in A-TIG welding is observed. Among them, the greatest energy efficiency of the arc process on the penetration of CrNi18-10 steel is observed when oxides such as TiO2, SiO2, Cr2O3 and Co3O4 are used.

全文:

受限制的访问

作者简介

Rustam Saidov

Institute of Material ScUinces, SPA “Physics-Sun” Academy of ScUince of Uzbekistan

Email: saidov_r@yahoo.com
PhD, senior research

Durdona Komilova

Institute of Material ScUinces, SPA “Physics-Sun” Academy of ScUince of Uzbekistan

Email: komilova78@mail.ru
senior research

Mario Kusch

Chemnitz University of Technology

Email: mario.kusch@mb.tu-chemnitz.de
Dr.-Ing., Department of Manufacturing and Welding Engineering Germany

Peter Mayr

Chemnitz University of Technology

Email: peter.mayr@mb.tu-chemnitz.de
professor, Dr., Department of Manufacturing and Welding Engineering Germany

Kevin Hoefer

Chemnitz University of Technology

Email: kevin.hoefer@mb.tu-chemnitz.de
Dipl.-Ing., Department of Manufacturing and Welding Engineering Germany

参考

  1. Savytsky O.M. et al. Characteristics of Constructions and Reliability of Welded Structures in the Combined High-Pressure Vessels (in Ukrainian) // Research and Development in the Field of Oil and Gas. 2013. No. 2. Рp. 133-143.
  2. Savytsky O.M., Savytsky M.M., Shkrabalyuk Y.M., Vuherer T., Bajić D.R. The Influence of Electric Arc Activation on the Speed of heating and the structure of metal in welds // Thermal Science. 2016. Vol. 20. No. 1. Рp. 239-246.
  3. Thiago José Donegá, Thonson Fereira Costa, Rosenda Valdés Arencibia, Louriel Oliveira Vilarinho. Comparison of thermal efficiency between A-TIG and conventional TIG welding // Welding International. 2016. Vol. 30. No. 4. Рp. 255-267.
  4. Niles R.W., Jackson C.E. Weld Thermal Efficiency of the GTAW Process // Welding Journal. January 1975. Res. Suppl. Рp. 25-32.
  5. Saidov R.M., Kusch M., Mayr P., Hoefer K., Akhadov J., Komilova D., Mukhitdinov Z. Study of Influence of Oxide’s Physico-Chemical Propertuis to the Formation Welding Beads During A-TIG Welding of Stainless Steels (in Russian) // Computational nanotechnology. 2016. No. 4. Рp. 10-20.
  6. Ostrovskiy О.Е., Krukovskiy V.N., Buk B.B. at al. Influence on activating fluxes to the welding arc penetration property and energy concentration in anodic spot // Welding production. 1977. No. 3. Рp. 3-4.
  7. Savitskiy М.М., Leskov G.I. Mechanism of electronegative elements on arc penetration property with tungsten cathode // Automatic welding. 1980. № 9. Рp. 17-23.
  8. Bukarov V.А., Ishenko Yu.S., Erokhin А.А. Some characteristics of arc during steel 18-8 welding with oxidized surface // Welding production. 1975. No. 10. Рp. 3-4.
  9. Leconte S., Paillard P., Chapelle P., Henrion G., Saindrenan J. Effect of oxide fluxes on activation mechanisms of tungsten inert gas process // Science and Technology of Welding and Joining. 2006. Vol. 11. No. 4. Рp. 389-397.
  10. Simonik А.G., Petviashvili V.I., Ivanov А.А. The effect of arcing contraction with the introduction of electronegative elements // Welding production. 1976. No. 3. Рp. 49-51.
  11. Ishizaki K. et al. Interfacial Tension Theory on the Phenomena of Arc Welding // J. Japan Welding Society (JWS). 1965. Vol. 34. No. 2. Р. 146.
  12. Mills K.C., Keene B.J., Brooks R.F., Shirali A. Marangoni effects in welding // Philos. Trans. R. Soc. Math. Phys. Eng. Sci. 1998. Bd. 356. No. 1739. Рp. 911-925.

补充文件

附件文件
动作
1. JATS XML


##common.cookie##