Additive Technologies in CAD / CAM / CAPP ADEM–VX

А. A. Avvakumov; Аввакумов А. А.

doi:10.22184/2499-9407.2023.32.3.66.67

Additive Technologies in CAD / CAM / CAPP ADEM–VX

Authors: Avvakumov А.A.¹
Affiliations:
1. Группа компаний ADEM
Issue: No 3 (2023)
Pages: 66-67
Section: ИНФОРМАЦИОННЫЕ ТЕХНОЛОГИИ
URL: https://journals.eco-vector.com/2499-9407/article/view/629070
DOI: https://doi.org/10.22184/2499-9407.2023.32.3.66.67
ID: 629070

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription or Fee Access

Abstract

ADEM VX version software complex supporting process design in the field of additive technologies is presented, which allows to perform simultaneously programming of growing units (CAM module) and process design (CAPP module) for inclusion of additive processing operations into the general information system of the enterprise.

Keywords

additive technologies, direct laser growing method, process design, enterprise information system

Full Text

About the authors

А. A. Avvakumov

Группа компаний ADEM

Author for correspondence.
Email: journal@electronics.ru

ведущий специалист техподдержки

Russian Federation

References

Носова Е. А., Балякин А. В., Олейник М. А. Исследование влияния отжига на микроструктуру и твердость сплава ЭП648 после прямого лазерного выращивания // Фундаментальные проблемы современного материаловедения. 2022. Т. 18. № 1. С. 9–14.