Email this article Resistance to abrasive wear of renewed plow moldboards
- Authors: Puchin Y.A1, Kozhukhova N.Y.2, Yakushenko N.A3
-
Affiliations:
- V.P. Goryachkin Moscow State Agricultural Engineering University
- All-Russian Research Institute of Repair and Maintenance of Machine and Tractor Fleet
- Bryansk State Agricultural Academy
- Issue: Vol 80, No 10 (2013)
- Pages: 43-45
- Section: Articles
- URL: https://journals.eco-vector.com/0321-4443/article/view/65776
- DOI: https://doi.org/10.17816/0321-4443-65776
Cite item
Full Text
Abstract
It is shown that application of welding armoring of renewed moldboards ensures longer service life in comparison with non-reinforced parts by 20 per cent; failure times of renewed and reinforced moldboards and new-supplied ones are comparable. Wear resistance by weight alters according to a parabolic function and cannot be a criteria of moldboards longevity.
Keywords
Full Text
Стойкость к абразивному изнашиванию восстановленных плужных отвалов×
About the authors
Ye. A Puchin
V.P. Goryachkin Moscow State Agricultural Engineering University
N. Yu Kozhukhova
All-Russian Research Institute of Repair and Maintenance of Machine and Tractor Fleet
Email: ing@bgsha.com
N. A Yakushenko
Bryansk State Agricultural Academy
References
- Прудников С.Н. Устранение лучевидного износа у лемехов и отвалов // Сельский механизатор. – 2010, №12.
- Михальченков А.М., Капошко Д.А. Повышение ресурса лемехов плужных корпусов упрочнением их сварочным армированием // Ремонт, восстановление, модернизация. – 2005, №7.
СМИ зарегистрировано Федеральной службой по надзору в сфере связи, информационных технологий и массовых коммуникаций (Роскомнадзор).