Vol 77, No 2 (2010)
- Year: 2010
- Articles: 21
- URL: https://journals.eco-vector.com/0321-4443/issue/view/3778
Articles
An analysis of constructions of running gears for caterpillar agricultural tractors
Tractors and Agricultural Machinery. 2010;77(2):3-10
3-10
Effect of combustion controllers on the technical-and-ecological characteristics of internal combustion engines
Abstract
In article the influence of combustion regulators on technical and ecological characteristics of work of internal combustion engines is described. Influence of chemical combustion controllers on the exit of nitrogen oxides of engine SMD-18N is defined. Dependence of the exit of nitrogen oxides on the factor of excess of air is revealed.
Tractors and Agricultural Machinery. 2010;77(2):10-12
10-12
Converter for mechanical stepless transmissions of automobiles and tractors
Abstract
The device that transforms the rotation of a drive shaft of mechanical stepless transmission into angular oscillations of intermediate parts is considered. The rotation of fixed direction is transmitted from these parts to the driven torsion shafts by means of mechanical rectifiers (one-way clutch). The value of the device structural parameter, at which maximum loads acting on its units are considerably decreased, is defined.
Tractors and Agricultural Machinery. 2010;77(2):12-15
12-15
15-17
Features of presentation of mobile machines characteristics
Abstract
It is offered to change coordinate representation of such popular characteristics of traction systems, as traction characteristics and φ-s-diagrams. It is shown that it will essentially facilitate teaching and understanding of physical sense of the phenomena put in their basis.
Tractors and Agricultural Machinery. 2010;77(2):18-19
18-19
Simulation of articulated transport-and-technological systems
Abstract
The article is devoted to the problem of multisections articulated transport-and-technological systems modeling. Classification and analysis of options for the use of articulated transport-and-technological systems in various fields of national economy are given. A modular approach, which allows to use the object-oriented method for modeling and programming in the design phase, is suggested. This approach can considerably simplify and accelerate the creation of complex transport-and-technological systems.
Tractors and Agricultural Machinery. 2010;77(2):20-23
20-23
24-25
Calculating indices of work cycle of engine with the spark ignition and different feed systems
Abstract
Посвящена особенностям расчета показателей рабочего цикла двигателя с искровым зажиганием и инжекторной системой питания распределительного типа. Установлено влияние коэффициента наполнения на мощность, крутящий момент, удельный расход топлива и другие показатели газового двигателя с инжекторной системой питания, создаваемого на базе эксплуатируемых/выпускаемых бензиновых двигателей.
Tractors and Agricultural Machinery. 2010;77(2):25-27
25-27
Approximate linearization of equations of gas flowing in the gap heat belt of piston - cylinder of high-speed transport diesels
Abstract
На основе современной механики жидкости и газа в целом и теории пограничного слоя в частности, а не чисто эмпирической информации, разработана модель течения газа в сопряжении жаровой пояс поршня - цилиндр быстроходных транспортных дизелей.
Tractors and Agricultural Machinery. 2010;77(2):27-31
27-31
31-32
Forest fire extinguishing unit with end mill: optimization of parameters and operational regimes
Abstract
The article describes the results of experimental research of forest fire extinguishing unit with end mill based on self-propelled chassis T-16M. Optimum velocity of unit, rotation frequency and diameter of the working organ, the number of cutting knives, their inclination to the cutting disc plane and radius are considered.
Tractors and Agricultural Machinery. 2010;77(2):33-35
33-35
35-38
Improving bearing assembly of turbo-supercharger for motor-and-tractor internal combustion engine
Abstract
Results of the analysis of operation features of motor-and-tractor internal combustion engines with turbo-supercharging are given. The design of an advanced bearing assembly and of the heat insulation of turbo-supercharger elements is presented.
Tractors and Agricultural Machinery. 2010;77(2):39-42
39-42
Overload level by the act of adaptive friction clutches
Abstract
Показано изменение внутренних силовых факторов, действующих в адаптивных фрикционных муфтах первого поколения с дифференцированными парами трения перед срабатыванием и в процессе срабатывания. Установлено, что теоретический вращающий момент муфт при срабатывании превышает его настроечную величину даже при больших коэффициентах усиления обратной связи, а распорная сила отжимного устройства имеет максимум внутри интервала изменения коэффициента трения.
Tractors and Agricultural Machinery. 2010;77(2):42-44
42-44
About evaluation of constructive reliability of cylindrical springs with variable section by complicate deformations
Abstract
In this work compression springs with torsion are examined. In calculations relations between kinematic and static characteristics, according to the Kirchhoff and Clebsch theory, are used. Calculation of springs on carrying capacity or reliability loss with critical values of torque and axial force determination is brought.
Tractors and Agricultural Machinery. 2010;77(2):44-46
44-46
Comparative assessment of potato-diggers maintainability
Abstract
Приведены результаты исследований эксплуатационной надежности различных картофелекопателей (в частности, уточненные данные по трудоемкости ТО и текущего ремонта широко используемых в хозяйствах моделей и средней наработке на отказ) и расчета основных показателей работы картофелеуборочных машин. Дана оценка степени влияния отдельных рабочих органов на общую эксплуатационную надежность машин.
Tractors and Agricultural Machinery. 2010;77(2):46-47
46-47
Widening possibilities of the use of heat generating installations for starting internal combustion engines by low temperatures of environment
Abstract
Possibility of independent (from the point of view of electricity consumption) functioning of heat-generating sets, used for the engine prestarting heat, for the maintenance of its thermal condition, for the cabin (salon) heating at movement or on parking, is shown.
Tractors and Agricultural Machinery. 2010;77(2):48-49
48-49
49-51
51-56
Handbook for the selection technique
Tractors and Agricultural Machinery. 2010;77(2):19-
19-
75th anniversary of N.M. Morozov
Tractors and Agricultural Machinery. 2010;77(2):38-
38-
СМИ зарегистрировано Федеральной службой по надзору в сфере связи, информационных технологий и массовых коммуникаций (Роскомнадзор).Регистрационный номер и дата принятия решения о регистрации СМИ: ПИ № ФС 77 - 81900 выдано 05.10.2021.