Email this article Simulation of automated machining systems
- Authors: Chekanina EA1
-
Affiliations:
- Moscow State Technical University «Stankin»
- Issue: Vol 19, No 2 (2011)
- Pages: 147-151
- Section: Articles
- URL: https://journals.eco-vector.com/1991-8542/article/view/19584
- DOI: https://doi.org/10.14498/tech.2011.2.%25u
- ID: 19584
Cite item
Full Text
Abstract
The paper considers a method of modeling the technological process using a Markov chain,
technical characteristics of production systems. This method would allow submit the technological
process in the form of a causal link between its constituent elements and establish the
extent of their influence on the final result of the production system.
technical characteristics of production systems. This method would allow submit the technological
process in the form of a causal link between its constituent elements and establish the
extent of their influence on the final result of the production system.
About the authors
E A Chekanina
Moscow State Technical University «Stankin»
Email: eugene-ch@mail.ru
аспирант; Московский государственный технологический университет «Станкин»; Moscow State Technical University «Stankin»
References
- Соломенцев Ю.М. Проблема создания компьютеризированных интегрированных производств // Автоматизация проектирования. - №1. - 1997. - С. 10-14.
- Зыков А.А. Основы теории графов. - М.: Наука, 1987. - 384 с.
Supplementary files
