Enviar artigo por via de e-mail DC analysis of electrical circuits by the Newton - Raphson method
- Autores: Strogonov A.1
-
Afiliações:
- Воронежский государственный технический университет
- Edição: Nº 1 (2023)
- Páginas: 110-120
- Seção: CAD / CAE
- URL: https://journals.eco-vector.com/1992-4178/article/view/628801
- DOI: https://doi.org/10.22184/1992-4178.2023.222.1.110.120
- ID: 628801
Citar
Texto integral
Acesso aberto
Acesso está concedido
Acesso é pago ou somente para assinantes
Resumo
By the Newton - Raphson DC circuit analysis method as an example, the article shows the possibility of using well-known algorithms for the analysis of electrical circuits, as an alternative to SPICE simulating, and assessed their accuracy in comparison with modern design tools.
Palavras-chave
Texto integral
Sobre autores
A. Strogonov
Воронежский государственный технический университет
Autor responsável pela correspondência
Email: andreistrogonov@mail.ru
д. т. н.; профессор кафедры полупроводниковой электроники и наноэлектроники
RússiaBibliografia
- Влах И., Сингхал К. Машинные методы анализа и проектирования электронных схем / Пер. с англ. М.: Радио и связь, 1988. 560 с.
- Чуа Л. О., Лин Пен-Мин. Машинный анализ электронных схем. Алгоритмы и вычислительные методы / Пер. с англ. М.: Энергия, 1980. 640 с.
- Деннис Дж., Шнабель Р. Численные методы безусловной оптимизации и решения нелинейных уравнений / Пер. с англ. М.: Мир, 1988. 440 с.
- Кучумов А. А., Кучумов А. И. Электроника и схемотехника. М.: Гелиос АРВ, 2017. 368 с.
- Петров М. Н., Гудков Г. В. Моделирование компонентов и элементов интегральных схем: Уч. пос. СПб: Издательство «Лань», 2011. 464 с.
- https://www.allaboutcircuits.com/textbook/semiconductors/chpt-3/spice-models/#.
Arquivos suplementares
Arquivos suplementares
Ação
1.
JATS XML
2.
Fig. 1. Nestop procedure
Baixar (233KB)
3.
Fig. 2. Linear circuit consisting of a current source and three resistors
Baixar (69KB)
4.
Fig. 3. Analysis of a linear circuit consisting of a current source and three resistors in OrCad
Baixar (128KB)
5.
Fig. 4. FVEC procedure for a linear circuit consisting of a current source and three resistors
Baixar (93KB)
6.
Fig. 5. Nonlinear circuit consisting of a current source, resistors and a diode
Baixar (58KB)
7.
Fig. 6. FVEC procedure for a nonlinear circuit consisting of a current source, resistors and a diode
Baixar (92KB)
8.
Fig. 7. Analysis of a nonlinear circuit consisting of a current source, two resistors and one diode in OrCad
Baixar (130KB)
9.
Fig. 8. Nonlinear circuit consisting of a current source, a resistor and two diodes
Baixar (61KB)
10.
Fig. 9. FVEC procedure for a nonlinear circuit consisting of a current source, a resistor and two diodes
Baixar (96KB)
11.
Fig. 10. Analysis of a nonlinear circuit consisting of a current source, a resistor and two diodes in OrCad
Baixar (114KB)
12.
Fig. 11. Analysis of a nonlinear circuit consisting of a current source, a resistor and two diodes in the LTspice XVII(x64) simulator
Baixar (154KB)
13.
Fig. 12. Circuit analysis in Matlab/Simulink (Simscape extension package)
Baixar (144KB)
14.
Fig. 13.1. Program code for analyzing the DC circuit for example 3
Baixar (1MB)
15.
Fig. 13.2. Program code for analyzing the DC circuit for example 3
Baixar (1MB)
16.
Fig. 13.3. Program code for analyzing the DC circuit for example 3
Baixar (742KB)
17.
Fig. 14. Fragment of the program report file for example 3 (first four iterations)
Baixar (1MB)
