Enviar artigo por via de e-mail Comparative analysis of the characteristics of the high-speed connector Multigig RT2 (USA) and the domestic analogue produced by Radiant-EK JSC
- Autores: Shalomanov V.1, Bakanin D.1, Shadrunov E.1
-
Afiliações:
- АО «Радиант-ЭК»
- Edição: Nº 3 (2025)
- Páginas: 186-190
- Seção: Electromechanical Components
- URL: https://journals.eco-vector.com/1992-4178/article/view/685750
- DOI: https://doi.org/10.22184/1992-4178.2025.244.3.186.190
- ID: 685750
Citar
Texto integral
Acesso aberto
Acesso está concedido
Acesso é pago ou somente para assinantes
Resumo
The article discusses the results of measuring the insertion loss and data transfer rate of a new domestic modular high-speed connector in comparison with a foreign analogue Multigig RT2 manufactured by TE Connectivity (USA).
Palavras-chave
Texto integral
Sobre autores
V. Shalomanov
АО «Радиант-ЭК»
Autor responsável pela correspondência
Email: v.shalomanov@ranet.ru
ведущий инженер
RússiaD. Bakanin
АО «Радиант-ЭК»
Email: d.bakanin@ranet.ru
начальник конструкторско-технологического отдела
RússiaE. Shadrunov
АО «Радиант-ЭК»
Email: e.shadrunov@ranet.ru
заместитель директора производства
RússiaBibliografia
- Баканин Д.В., Шаломанов В.И. Отечественный модульный высокоскоростной соединитель стандарта VPX (VITA 46) от АО «Радиант-ЭК» // Электронные компоненты. 2023. № 2. С. 56–60.
- TE Connectivity. Multigig RT2 High-Speed Connector Series. Technical Specifications. 2022 // www.te.com.
- Найквист Г. Теоретические основы передачи сигналов в каналах связи // Теория связи. 1928. Т. 12. С. 123–145.
- Шаломанов В.И., Баканин Д.В. Высокоскоростные дифференциальные пары на печатной плате для модульного соединителя // ЭЛЕКТРОНИКА: Наука, Технология, Бизнес. 2024. № 3. С. 142–146.
- Amphenol. RVPX Series Connectors. Datasheet. 2021 // www.amphenol.com.
Arquivos suplementares
Arquivos suplementares
Ação
1.
JATS XML
2.
Fig. 1. High-speed Multigig RT2 connector from TE Connectivity
Baixar (1MB)
3.
Fig. 2. Experimental fixture: top – for a plug (with the connector holes located on the edge of the board), bottom – for a receptacle (with the connector holes located in the center of the board)
Baixar (433KB)
4.
Fig. 3. Network analyzer with the fixture connected
Baixar (1MB)
5.
Fig. 4. Connected fixture
Baixar (289KB)
6.
Fig. 5. Measuring the impedance of a TE Connectivity connector
Baixar (57KB)
7.
Fig. 6. Measuring the impedance of a Radiant-EK connector
Baixar (58KB)
8.
Fig. 7. Measuring the insertion loss of a TE Connectivity connector
Baixar (61KB)
9.
Fig. 8. Measuring the insertion loss of a Radiant-EK connector
Baixar (62KB)
10.
Fig. 9. Insertion loss of an RVPX series connector from Amphenol
Baixar (114KB)
11.
Fig. 10. Impedance of an RVPX series connector from Amphenol
Baixar (94KB)
