Email this article Technological process optimization for aviation part frame manufacturing on the basis of calculations in the automated warpage computation system
- Authors: Kluchnikov SI1, Barakhtenko EA1
-
Affiliations:
- Irkutsk State Technical University
- Issue: Vol 4, No 2 (2010)
- Pages: 124-129
- Section: Articles
- URL: https://journals.eco-vector.com/2074-0530/article/view/69677
- DOI: https://doi.org/10.17816/2074-0530-69677
- ID: 69677
Cite item
Full Text
Abstract
The computer-aided warpage computation system is considered in the paper as applied to technological process optimization for manufacturing of aviation parts. The authors give recommendations on technological process optimization for the aviation part frame
About the authors
S I Kluchnikov
Irkutsk State Technical University
Email: 8 (3952) 41-17-70
к.т.н. доц; Иркутский государственный технический университет; Irkutsk State Technical University
E A Barakhtenko
Irkutsk State Technical University
Email: 8 (3952) 41-17-70
Irkutsk State Technical University
References
- Ключников. С.И., Барахтенко Е.А. Моделирование напряженного состояния детали после механической обработки // Вестник ИрГТУ. - Иркутск, 2006. - №4. - с. 69-73.
- Журавлев Д.А., Ключников С.И. Функция взаимовлияния для расчета остаточной деформации изгиба маложестких деталей при механообработке // Вестник ИрГТУ. - Иркутск, 1998. - №3. - с. 86-91.
Supplementary files
